Impact response analysis of wire ring net system using the concept of particle method

Yoshimi Sonoda, Y. Hata, K. Fukunaga

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

In Japan, there are many steep mountainous areas and we have local severe rain in the season, thus rock-fall accidents occur in mountain regions year after year. In order to protect an arterial road and the urban areas from the rock-fall accidents, various protective structures had been already constructed. However most of them are made of reinforced concrete and they require huge construction cost. Hence a new economical protective structure has been expected for a long time. From these needs, several high-energy absorption rock-fall nets have been developed. Some of them have specialized shock absorbing device or specialized column which has plastic rotation capacity. On the one hand, wire frame structure (called the wire ring net system) that is composed of interconnected many wire rings of about 30 cm in diameter are predominant in Europe. Because these structures can absorb large kinetic energy of a falling rock due to their deformation capacity, they are introduced from Europe as the highly-effective structures. The wire ring net system is composed of many parts (wire ring, wire rope, supporting post, etc), and it does not require large bases due to its light weight. However, there is no analysis method that can calculate their impact response (dynamic behaviour and energy absorbing capacity), and it has been only confirmed by the full-scale falling weight tests. Although, there are several cases that evaluate the performance by same tests in Japan, the test condition is limited by restriction of test station and its cost. Therefore, this study aims at simulating the impact response of wire ring net system by using the concept of particle method. The following conclusions are obtained from this study. 1) The proposed method can simulate the impact response of the wire ring net system. 2) Fracture of the wire ring net is predicted applying critical strain limit for the material.

Original languageEnglish
Title of host publicationPerformance, Protection and Strengthening of Structures under Extreme Loading
Pages446-451
Number of pages6
Volume82
DOIs
Publication statusPublished - 2011
Event3rd International Workshop on Performance, Protection and Strengthening of Structures under Extreme Loading, PROTECT2011 - Lugano, Switzerland
Duration: Aug 30 2011Sep 1 2011

Publication series

NameApplied Mechanics and Materials
Volume82
ISSN (Print)1660-9336
ISSN (Electronic)1662-7482

Other

Other3rd International Workshop on Performance, Protection and Strengthening of Structures under Extreme Loading, PROTECT2011
CountrySwitzerland
CityLugano
Period8/30/119/1/11

Fingerprint

Wire
Rocks
Accidents
Wire rope
Energy absorption
Kinetic energy
Dynamic response
Rain
Reinforced concrete
Costs
Plastics

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Sonoda, Y., Hata, Y., & Fukunaga, K. (2011). Impact response analysis of wire ring net system using the concept of particle method. In Performance, Protection and Strengthening of Structures under Extreme Loading (Vol. 82, pp. 446-451). (Applied Mechanics and Materials; Vol. 82). https://doi.org/10.4028/www.scientific.net/AMM.82.446

Impact response analysis of wire ring net system using the concept of particle method. / Sonoda, Yoshimi; Hata, Y.; Fukunaga, K.

Performance, Protection and Strengthening of Structures under Extreme Loading. Vol. 82 2011. p. 446-451 (Applied Mechanics and Materials; Vol. 82).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sonoda, Y, Hata, Y & Fukunaga, K 2011, Impact response analysis of wire ring net system using the concept of particle method. in Performance, Protection and Strengthening of Structures under Extreme Loading. vol. 82, Applied Mechanics and Materials, vol. 82, pp. 446-451, 3rd International Workshop on Performance, Protection and Strengthening of Structures under Extreme Loading, PROTECT2011, Lugano, Switzerland, 8/30/11. https://doi.org/10.4028/www.scientific.net/AMM.82.446
Sonoda Y, Hata Y, Fukunaga K. Impact response analysis of wire ring net system using the concept of particle method. In Performance, Protection and Strengthening of Structures under Extreme Loading. Vol. 82. 2011. p. 446-451. (Applied Mechanics and Materials). https://doi.org/10.4028/www.scientific.net/AMM.82.446
Sonoda, Yoshimi ; Hata, Y. ; Fukunaga, K. / Impact response analysis of wire ring net system using the concept of particle method. Performance, Protection and Strengthening of Structures under Extreme Loading. Vol. 82 2011. pp. 446-451 (Applied Mechanics and Materials).
@inproceedings{670c6be27b584c9fad2a09a6b53c7f88,
title = "Impact response analysis of wire ring net system using the concept of particle method",
abstract = "In Japan, there are many steep mountainous areas and we have local severe rain in the season, thus rock-fall accidents occur in mountain regions year after year. In order to protect an arterial road and the urban areas from the rock-fall accidents, various protective structures had been already constructed. However most of them are made of reinforced concrete and they require huge construction cost. Hence a new economical protective structure has been expected for a long time. From these needs, several high-energy absorption rock-fall nets have been developed. Some of them have specialized shock absorbing device or specialized column which has plastic rotation capacity. On the one hand, wire frame structure (called the wire ring net system) that is composed of interconnected many wire rings of about 30 cm in diameter are predominant in Europe. Because these structures can absorb large kinetic energy of a falling rock due to their deformation capacity, they are introduced from Europe as the highly-effective structures. The wire ring net system is composed of many parts (wire ring, wire rope, supporting post, etc), and it does not require large bases due to its light weight. However, there is no analysis method that can calculate their impact response (dynamic behaviour and energy absorbing capacity), and it has been only confirmed by the full-scale falling weight tests. Although, there are several cases that evaluate the performance by same tests in Japan, the test condition is limited by restriction of test station and its cost. Therefore, this study aims at simulating the impact response of wire ring net system by using the concept of particle method. The following conclusions are obtained from this study. 1) The proposed method can simulate the impact response of the wire ring net system. 2) Fracture of the wire ring net is predicted applying critical strain limit for the material.",
author = "Yoshimi Sonoda and Y. Hata and K. Fukunaga",
year = "2011",
doi = "10.4028/www.scientific.net/AMM.82.446",
language = "English",
isbn = "9783037852170",
volume = "82",
series = "Applied Mechanics and Materials",
pages = "446--451",
booktitle = "Performance, Protection and Strengthening of Structures under Extreme Loading",

}

TY - GEN

T1 - Impact response analysis of wire ring net system using the concept of particle method

AU - Sonoda, Yoshimi

AU - Hata, Y.

AU - Fukunaga, K.

PY - 2011

Y1 - 2011

N2 - In Japan, there are many steep mountainous areas and we have local severe rain in the season, thus rock-fall accidents occur in mountain regions year after year. In order to protect an arterial road and the urban areas from the rock-fall accidents, various protective structures had been already constructed. However most of them are made of reinforced concrete and they require huge construction cost. Hence a new economical protective structure has been expected for a long time. From these needs, several high-energy absorption rock-fall nets have been developed. Some of them have specialized shock absorbing device or specialized column which has plastic rotation capacity. On the one hand, wire frame structure (called the wire ring net system) that is composed of interconnected many wire rings of about 30 cm in diameter are predominant in Europe. Because these structures can absorb large kinetic energy of a falling rock due to their deformation capacity, they are introduced from Europe as the highly-effective structures. The wire ring net system is composed of many parts (wire ring, wire rope, supporting post, etc), and it does not require large bases due to its light weight. However, there is no analysis method that can calculate their impact response (dynamic behaviour and energy absorbing capacity), and it has been only confirmed by the full-scale falling weight tests. Although, there are several cases that evaluate the performance by same tests in Japan, the test condition is limited by restriction of test station and its cost. Therefore, this study aims at simulating the impact response of wire ring net system by using the concept of particle method. The following conclusions are obtained from this study. 1) The proposed method can simulate the impact response of the wire ring net system. 2) Fracture of the wire ring net is predicted applying critical strain limit for the material.

AB - In Japan, there are many steep mountainous areas and we have local severe rain in the season, thus rock-fall accidents occur in mountain regions year after year. In order to protect an arterial road and the urban areas from the rock-fall accidents, various protective structures had been already constructed. However most of them are made of reinforced concrete and they require huge construction cost. Hence a new economical protective structure has been expected for a long time. From these needs, several high-energy absorption rock-fall nets have been developed. Some of them have specialized shock absorbing device or specialized column which has plastic rotation capacity. On the one hand, wire frame structure (called the wire ring net system) that is composed of interconnected many wire rings of about 30 cm in diameter are predominant in Europe. Because these structures can absorb large kinetic energy of a falling rock due to their deformation capacity, they are introduced from Europe as the highly-effective structures. The wire ring net system is composed of many parts (wire ring, wire rope, supporting post, etc), and it does not require large bases due to its light weight. However, there is no analysis method that can calculate their impact response (dynamic behaviour and energy absorbing capacity), and it has been only confirmed by the full-scale falling weight tests. Although, there are several cases that evaluate the performance by same tests in Japan, the test condition is limited by restriction of test station and its cost. Therefore, this study aims at simulating the impact response of wire ring net system by using the concept of particle method. The following conclusions are obtained from this study. 1) The proposed method can simulate the impact response of the wire ring net system. 2) Fracture of the wire ring net is predicted applying critical strain limit for the material.

UR - http://www.scopus.com/inward/record.url?scp=80052086920&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=80052086920&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/AMM.82.446

DO - 10.4028/www.scientific.net/AMM.82.446

M3 - Conference contribution

AN - SCOPUS:80052086920

SN - 9783037852170

VL - 82

T3 - Applied Mechanics and Materials

SP - 446

EP - 451

BT - Performance, Protection and Strengthening of Structures under Extreme Loading

ER -