In situ heating SEM observation of the bainitic transformation process in Cu–17Al–11Mn (at.%) alloys

Shunichi Motomura, Yohei Soejima, Takayuki Miyoshi, Toru Hara, Toshihiro Omori, Ryosuke Kainuma, Minoru Nishida

Research output: Contribution to journalArticlepeer-review

2 Citations (Scopus)

Abstract

To understand the bainitic transformation behavior in Cu–17Al–11Mn (at.%) alloys, dynamic in situ observation during heating was carried out in a scanning electron microscope (SEM). In this study, after optimizing the sample preparation method and observation conditions, we successfully observed the transformation process with sufficient resolution and contrast. From the observation results, bainite is first formed preferentially at the grain boundaries of the parent phase. Bainite is also formed inside the grains to relax the elastic strain generated by the initial bainite. Regarding the growth mode, in the early stage of the transformation, bainite grows along the longitudinal direction, and in the late stage, it grows along the lateral direction. The growth rate of the bainite was also evaluated by continuous observation of the same plate. Dynamic in situ observation of a martensitic transformation in the same alloy was also performed to compare the growth mode with that of bainite, and it was found that the behavior is considerably different between bainitic and the martensitic transformations.

Original languageEnglish
Pages (from-to)159-168
Number of pages10
JournalMicroscopy
Volume65
Issue number2
DOIs
Publication statusPublished - Apr 1 2016
Externally publishedYes

All Science Journal Classification (ASJC) codes

  • Structural Biology
  • Instrumentation
  • Radiology Nuclear Medicine and imaging

Fingerprint Dive into the research topics of 'In situ heating SEM observation of the bainitic transformation process in Cu–17Al–11Mn (at.%) alloys'. Together they form a unique fingerprint.

Cite this