In vitro apatite-forming ability of titania fims depends on their substrates

T. Shozui, K. Tsuru, S. Hayakawa, A. Osaka

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

Titania films were coated by means of sol-gel method on various substrates such as titanium, titanium alloy, silicon wafer, stainless-steel, alumina, and glass slide where they coded as C5Ti, C5Ti6Al4V, C5Si, C5SUS, C5Al 2O3 and C5GS, respectively. Their in vitro apatite-forming ability was examined with the Kokubo's simulated body fluid (SBF; pH 7.4, 36.5°C). C5Ti, C5T16Al4V and C5Si deposited apatite particles on their surface within 7 days, whereas, C5SUS, CSAl2O3 and C5GS did not. These results implied that the in vitro apatite-forming ability of the titania films indirectly depended on the chemical or physical properties of the substrates.

Original languageEnglish
Pages (from-to)633-636
Number of pages4
JournalKey Engineering Materials
Volume330-332 I
DOIs
Publication statusPublished - Jan 1 2007
Externally publishedYes

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'In vitro apatite-forming ability of titania fims depends on their substrates'. Together they form a unique fingerprint.

  • Cite this