Incremental feeding high-pressure sliding for achieving large area of severe plastic deformation

Yoichi Takizawa, Kyohei Watanabe, Takahiro Kajita, Kosei Sumikawa, Takahiro Masuda, Manabu Yumoto, Yoshiharu Otagiri, Zenji Horita

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

In this study, high-pressure sliding is combined with incremental feeding so that a severely deformed area is enlarged without increasing the machine capacity. With this combined process (called the incremental feeding high-pressure sliding: IF-HPS), a sheet sample is lateraly fed every after sliding under high pressure. The IF-HPS process was applied to a Ni-based superalloy (Inconel 718) and a Ti-6Al-7Nb alloy (F1295) for grain refinement. The applicability of the IF-HPS process is examined with the advent of superplasticity through the grain refinement. Vickers microhardness measurement shows that the hardness is higher in the area of the second pass than the first pass for both Inconel 718 and F1295 but the hardness increase is more prominent in the area where the second passes is superimposed on the first passparticularly for the Inconel 718. After tensile testing, superplastic elongation more than 400% appears in the superimposed areas of both Inconel 718 and F1295. For the F1295 alloy, the area of the second pass also exhibits a suplerplastic elongation of 400%. Analysis by finte element method (FEM) reveals that strain introduced by outwardflow from the severely deformed area is sensitive to friction coefficient between the sample and anvil outside of the flat contact area. The strain due to this outwardflow conributes to the grain refinement in the second pass for the F1295 alloy but insuf-ficient for the Inconel 718.

Original languageEnglish
Pages (from-to)25-31
Number of pages7
JournalNippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
Volume82
Issue number1
DOIs
Publication statusPublished - Jan 1 2018

Fingerprint

Grain refinement
plastic deformation
Inconel (trademark)
sliding
Plastic deformation
Elongation
Hardness
Superplasticity
Tensile testing
Superalloys
Microhardness
elongation
Friction
hardness
superplasticity
heat resistant alloys
anvils
microhardness
coefficient of friction

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Mechanics of Materials
  • Metals and Alloys
  • Materials Chemistry

Cite this

Incremental feeding high-pressure sliding for achieving large area of severe plastic deformation. / Takizawa, Yoichi; Watanabe, Kyohei; Kajita, Takahiro; Sumikawa, Kosei; Masuda, Takahiro; Yumoto, Manabu; Otagiri, Yoshiharu; Horita, Zenji.

In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, Vol. 82, No. 1, 01.01.2018, p. 25-31.

Research output: Contribution to journalArticle

Takizawa, Yoichi ; Watanabe, Kyohei ; Kajita, Takahiro ; Sumikawa, Kosei ; Masuda, Takahiro ; Yumoto, Manabu ; Otagiri, Yoshiharu ; Horita, Zenji. / Incremental feeding high-pressure sliding for achieving large area of severe plastic deformation. In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 2018 ; Vol. 82, No. 1. pp. 25-31.
@article{41014936bcdb4181842114887a7b15a0,
title = "Incremental feeding high-pressure sliding for achieving large area of severe plastic deformation",
abstract = "In this study, high-pressure sliding is combined with incremental feeding so that a severely deformed area is enlarged without increasing the machine capacity. With this combined process (called the incremental feeding high-pressure sliding: IF-HPS), a sheet sample is lateraly fed every after sliding under high pressure. The IF-HPS process was applied to a Ni-based superalloy (Inconel 718) and a Ti-6Al-7Nb alloy (F1295) for grain refinement. The applicability of the IF-HPS process is examined with the advent of superplasticity through the grain refinement. Vickers microhardness measurement shows that the hardness is higher in the area of the second pass than the first pass for both Inconel 718 and F1295 but the hardness increase is more prominent in the area where the second passes is superimposed on the first passparticularly for the Inconel 718. After tensile testing, superplastic elongation more than 400{\%} appears in the superimposed areas of both Inconel 718 and F1295. For the F1295 alloy, the area of the second pass also exhibits a suplerplastic elongation of 400{\%}. Analysis by finte element method (FEM) reveals that strain introduced by outwardflow from the severely deformed area is sensitive to friction coefficient between the sample and anvil outside of the flat contact area. The strain due to this outwardflow conributes to the grain refinement in the second pass for the F1295 alloy but insuf-ficient for the Inconel 718.",
author = "Yoichi Takizawa and Kyohei Watanabe and Takahiro Kajita and Kosei Sumikawa and Takahiro Masuda and Manabu Yumoto and Yoshiharu Otagiri and Zenji Horita",
year = "2018",
month = "1",
day = "1",
doi = "10.2320/jinstmet.J2017038",
language = "English",
volume = "82",
pages = "25--31",
journal = "Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals",
issn = "0021-4876",
publisher = "公益社団法人 日本金属学会",
number = "1",

}

TY - JOUR

T1 - Incremental feeding high-pressure sliding for achieving large area of severe plastic deformation

AU - Takizawa, Yoichi

AU - Watanabe, Kyohei

AU - Kajita, Takahiro

AU - Sumikawa, Kosei

AU - Masuda, Takahiro

AU - Yumoto, Manabu

AU - Otagiri, Yoshiharu

AU - Horita, Zenji

PY - 2018/1/1

Y1 - 2018/1/1

N2 - In this study, high-pressure sliding is combined with incremental feeding so that a severely deformed area is enlarged without increasing the machine capacity. With this combined process (called the incremental feeding high-pressure sliding: IF-HPS), a sheet sample is lateraly fed every after sliding under high pressure. The IF-HPS process was applied to a Ni-based superalloy (Inconel 718) and a Ti-6Al-7Nb alloy (F1295) for grain refinement. The applicability of the IF-HPS process is examined with the advent of superplasticity through the grain refinement. Vickers microhardness measurement shows that the hardness is higher in the area of the second pass than the first pass for both Inconel 718 and F1295 but the hardness increase is more prominent in the area where the second passes is superimposed on the first passparticularly for the Inconel 718. After tensile testing, superplastic elongation more than 400% appears in the superimposed areas of both Inconel 718 and F1295. For the F1295 alloy, the area of the second pass also exhibits a suplerplastic elongation of 400%. Analysis by finte element method (FEM) reveals that strain introduced by outwardflow from the severely deformed area is sensitive to friction coefficient between the sample and anvil outside of the flat contact area. The strain due to this outwardflow conributes to the grain refinement in the second pass for the F1295 alloy but insuf-ficient for the Inconel 718.

AB - In this study, high-pressure sliding is combined with incremental feeding so that a severely deformed area is enlarged without increasing the machine capacity. With this combined process (called the incremental feeding high-pressure sliding: IF-HPS), a sheet sample is lateraly fed every after sliding under high pressure. The IF-HPS process was applied to a Ni-based superalloy (Inconel 718) and a Ti-6Al-7Nb alloy (F1295) for grain refinement. The applicability of the IF-HPS process is examined with the advent of superplasticity through the grain refinement. Vickers microhardness measurement shows that the hardness is higher in the area of the second pass than the first pass for both Inconel 718 and F1295 but the hardness increase is more prominent in the area where the second passes is superimposed on the first passparticularly for the Inconel 718. After tensile testing, superplastic elongation more than 400% appears in the superimposed areas of both Inconel 718 and F1295. For the F1295 alloy, the area of the second pass also exhibits a suplerplastic elongation of 400%. Analysis by finte element method (FEM) reveals that strain introduced by outwardflow from the severely deformed area is sensitive to friction coefficient between the sample and anvil outside of the flat contact area. The strain due to this outwardflow conributes to the grain refinement in the second pass for the F1295 alloy but insuf-ficient for the Inconel 718.

UR - http://www.scopus.com/inward/record.url?scp=85040313596&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85040313596&partnerID=8YFLogxK

U2 - 10.2320/jinstmet.J2017038

DO - 10.2320/jinstmet.J2017038

M3 - Article

AN - SCOPUS:85040313596

VL - 82

SP - 25

EP - 31

JO - Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals

JF - Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals

SN - 0021-4876

IS - 1

ER -