Influence of average monomer sequence length on molecular mobility of acrylonitrile butadiene rubber

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

The dominant factor of inhomogeneous molecular mobility (T2) of acrylonitrile butadiene rubber (NBR), has been studied by pulsed 1H NMR spectroscopy. We investigated the influence of the number-average molar mass of chain length between crosslinks (Mc) and average monomer sequence length of butadiene (LnBU), which is an inhomogeneity of the first ordered structure. The FID analysis shows that vulcanized samples are composed of 3 components with different molecular mobility, T2S, T2M and T2L. Moreover, we evaluated the Mc dependency of T2S, T2M and the 1H ratio and the change of T2S, T2M and the 1H ratio of before and after vulcanization against LnBU. According to the results, the LnBU showed a more dominant correlation to T2 and the 1H ratio than Mc. That implies that the NBR molecular chain with almost the same average monomer sequence length of acrylonitrile mobility at 30°C originates from the inhomogeneity of the first ordered structure of NBR.

Original languageEnglish
Pages (from-to)149-158
Number of pages10
JournalKobunshi Ronbunshu
Volume71
Issue number4
DOIs
Publication statusPublished - 2014

Fingerprint

Acrylonitrile
Rubber
Butadiene
rubber
Monomers
inhomogeneity
Vulcanization
nuclear magnetic resonance
Molar mass
spectroscopy
Chain length
Nuclear magnetic resonance spectroscopy
1,3-butadiene

All Science Journal Classification (ASJC) codes

  • Chemical Engineering (miscellaneous)
  • Materials Science (miscellaneous)
  • Environmental Science(all)
  • Polymers and Plastics

Cite this

Influence of average monomer sequence length on molecular mobility of acrylonitrile butadiene rubber. / Ono, Hiroaki; Fujiwara, Hirotada; Nishimura, Shin.

In: Kobunshi Ronbunshu, Vol. 71, No. 4, 2014, p. 149-158.

Research output: Contribution to journalArticle

@article{90cbe3328f2c4f1aafb6f9eec728baa0,
title = "Influence of average monomer sequence length on molecular mobility of acrylonitrile butadiene rubber",
abstract = "The dominant factor of inhomogeneous molecular mobility (T2) of acrylonitrile butadiene rubber (NBR), has been studied by pulsed 1H NMR spectroscopy. We investigated the influence of the number-average molar mass of chain length between crosslinks (Mc) and average monomer sequence length of butadiene (LnBU), which is an inhomogeneity of the first ordered structure. The FID analysis shows that vulcanized samples are composed of 3 components with different molecular mobility, T2S, T2M and T2L. Moreover, we evaluated the Mc dependency of T2S, T2M and the 1H ratio and the change of T2S, T2M and the 1H ratio of before and after vulcanization against LnBU. According to the results, the LnBU showed a more dominant correlation to T2 and the 1H ratio than Mc. That implies that the NBR molecular chain with almost the same average monomer sequence length of acrylonitrile mobility at 30°C originates from the inhomogeneity of the first ordered structure of NBR.",
author = "Hiroaki Ono and Hirotada Fujiwara and Shin Nishimura",
year = "2014",
doi = "10.1295/koron.71.149",
language = "English",
volume = "71",
pages = "149--158",
journal = "Kobunshi Ronbunshu",
issn = "0386-2186",
publisher = "The Society of Polymer Science, Japan",
number = "4",

}

TY - JOUR

T1 - Influence of average monomer sequence length on molecular mobility of acrylonitrile butadiene rubber

AU - Ono, Hiroaki

AU - Fujiwara, Hirotada

AU - Nishimura, Shin

PY - 2014

Y1 - 2014

N2 - The dominant factor of inhomogeneous molecular mobility (T2) of acrylonitrile butadiene rubber (NBR), has been studied by pulsed 1H NMR spectroscopy. We investigated the influence of the number-average molar mass of chain length between crosslinks (Mc) and average monomer sequence length of butadiene (LnBU), which is an inhomogeneity of the first ordered structure. The FID analysis shows that vulcanized samples are composed of 3 components with different molecular mobility, T2S, T2M and T2L. Moreover, we evaluated the Mc dependency of T2S, T2M and the 1H ratio and the change of T2S, T2M and the 1H ratio of before and after vulcanization against LnBU. According to the results, the LnBU showed a more dominant correlation to T2 and the 1H ratio than Mc. That implies that the NBR molecular chain with almost the same average monomer sequence length of acrylonitrile mobility at 30°C originates from the inhomogeneity of the first ordered structure of NBR.

AB - The dominant factor of inhomogeneous molecular mobility (T2) of acrylonitrile butadiene rubber (NBR), has been studied by pulsed 1H NMR spectroscopy. We investigated the influence of the number-average molar mass of chain length between crosslinks (Mc) and average monomer sequence length of butadiene (LnBU), which is an inhomogeneity of the first ordered structure. The FID analysis shows that vulcanized samples are composed of 3 components with different molecular mobility, T2S, T2M and T2L. Moreover, we evaluated the Mc dependency of T2S, T2M and the 1H ratio and the change of T2S, T2M and the 1H ratio of before and after vulcanization against LnBU. According to the results, the LnBU showed a more dominant correlation to T2 and the 1H ratio than Mc. That implies that the NBR molecular chain with almost the same average monomer sequence length of acrylonitrile mobility at 30°C originates from the inhomogeneity of the first ordered structure of NBR.

UR - http://www.scopus.com/inward/record.url?scp=84987703638&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84987703638&partnerID=8YFLogxK

U2 - 10.1295/koron.71.149

DO - 10.1295/koron.71.149

M3 - Article

AN - SCOPUS:84987703638

VL - 71

SP - 149

EP - 158

JO - Kobunshi Ronbunshu

JF - Kobunshi Ronbunshu

SN - 0386-2186

IS - 4

ER -