Influence of size of granulated rubber and tyre chips on the shear strength characteristics of sand–rubber mix

P. Anbazhagan, D. R. Manohar, Divyesh Rohit

Research output: Contribution to journalArticlepeer-review

22 Citations (Scopus)

Abstract

Use of scrap tyres in isolation systems for seismic damping, requires a knowledge of the engineering properties of sand–rubber mixtures (SRM). The primary objective of this study is to assess the influence of granulated rubber and tyre chips size and the gradation of sand on the strength behaviour of SRM by carrying out large-scale direct shear tests. A large direct shear test has been carried out on SRM considering different granulated rubber and tyre chip sizes and compositions. The following properties were investigated to know the effect of granulated rubber on dry sand; peak shear stress, cohesion, friction angle, secant modulus and volumetric strain. From the experiments, it was determined that the major factors influencing the above-mentioned properties were granulated rubber and tyre chip sizes, percentage of rubber in SRM and the normal stress applied. It was observed that the peak strength was significantly increased with increasing granulated rubber size up to rubber size VI (passing 12.5 mm and retained on 9.5 mm), and by adding granulated rubber up to 30%. This study shows that granulated rubber size VI gives maximum shear strength values at 30% rubber content. It was also found that more uniformly graded sand gives an improved value of shear strength with the inclusion of granulated rubber when compared to poorly graded sand.

Original languageEnglish
Pages (from-to)266-278
Number of pages13
JournalGeomechanics and Geoengineering
Volume12
Issue number4
DOIs
Publication statusPublished - Oct 2 2017
Externally publishedYes

All Science Journal Classification (ASJC) codes

  • Geotechnical Engineering and Engineering Geology

Fingerprint

Dive into the research topics of 'Influence of size of granulated rubber and tyre chips on the shear strength characteristics of sand–rubber mix'. Together they form a unique fingerprint.

Cite this