Influences of Parameters on the Production Flow Rate of Geothermal Fluids

Michihiro Fukuda, Hiroyuki Kamenosono, Ryuichi Itoi, Satoshi Akibayashi

Research output: Contribution to journalArticlepeer-review

Abstract

For a model of a lumped parameter reservoir combined with production wells, changes of production flow rates were calculated. From the results, followings can be said; 1. the flow rate steeply decreases just after the start of production until the reservoir reaches to the saturated condition, and then, 2. it keeps nearly constant for a while and abruptly declines in non-reinjection case, though it gradually decreases in the case of reinjecting low temperature water, and 3. if the fluid influx from heat source is large enough for the reservoir to keep unsaturated condition, it keeps constant for a long time, over 1 × 105 hours.

Original languageEnglish
Pages (from-to)31-43
Number of pages13
Journaljournal of the geothermal research society of japan
Volume13
Issue number1
DOIs
Publication statusPublished - 1991

All Science Journal Classification (ASJC) codes

  • Geophysics

Fingerprint Dive into the research topics of 'Influences of Parameters on the Production Flow Rate of Geothermal Fluids'. Together they form a unique fingerprint.

Cite this