Interfacial and Bulk Structures of Homologous Series of Azobenzene Amphiphiles Studied by Scanning Tunneling Microscopy and X-ray Diffraction

Masahito Sano, Darryl Y. Sasaki, Munetoshi Isayama, Toyoki Kunitake

Research output: Contribution to journalArticle

29 Citations (Scopus)

Abstract

Scanning tunneling microscopy (STM) and X-ray diffractometry (XRD) were applied to investigate the interfacial and bulk structures of 4-[[4-(alkoxy)phenyl]azo]benzoic acids by systematically varying the alkyl chain length. Complete wetting allowed us to perform STM on the crystalline ultrathin film, which was in the thermodynamic state that could be probed by XRD. XRD of the single crystalline, short chain compounds indicates a layered structure with a dimeric, head-to-head configuration with each azobenzene group tilted 70° with respect to the layer boundary. A bilayer model based on XRD spacings of longer homologs suggests that the tilt angle tends to decrease as the length of the alkyl chain increases. STM revealed various images of ordered molecular assemblies crystallized on the graphite surface. Although a head-to-head, bilayer configuration with the azobenzene units lying nearly parallel to the graphite surface was recognized for all homologs, no regularity in the chromophore orientation with respect to the alkyl chain length was observed. These studies show that while the length of alkyl chain controls the molecular orientation in the bulk, interaction of the alkyl chain with the graphite surface produces a variety of the aggregate structures at the interface.

Original languageEnglish
Pages (from-to)1893-1902
Number of pages10
JournalLangmuir
Volume8
Issue number8
DOIs
Publication statusPublished - Aug 1 1992
Externally publishedYes

Fingerprint

Amphiphiles
Azobenzene
Scanning tunneling microscopy
X ray diffraction analysis
Graphite
scanning tunneling microscopy
X ray diffraction
graphite
Chain length
diffraction
x rays
Crystalline materials
Benzoic acid
Molecular orientation
Ultrathin films
Benzoates
benzoic acid
Chromophores
configurations
regularity

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Surfaces and Interfaces
  • Spectroscopy
  • Electrochemistry

Cite this

Interfacial and Bulk Structures of Homologous Series of Azobenzene Amphiphiles Studied by Scanning Tunneling Microscopy and X-ray Diffraction. / Sano, Masahito; Sasaki, Darryl Y.; Isayama, Munetoshi; Kunitake, Toyoki.

In: Langmuir, Vol. 8, No. 8, 01.08.1992, p. 1893-1902.

Research output: Contribution to journalArticle

Sano, Masahito ; Sasaki, Darryl Y. ; Isayama, Munetoshi ; Kunitake, Toyoki. / Interfacial and Bulk Structures of Homologous Series of Azobenzene Amphiphiles Studied by Scanning Tunneling Microscopy and X-ray Diffraction. In: Langmuir. 1992 ; Vol. 8, No. 8. pp. 1893-1902.
@article{1118196169234514a51ad1d6fd737031,
title = "Interfacial and Bulk Structures of Homologous Series of Azobenzene Amphiphiles Studied by Scanning Tunneling Microscopy and X-ray Diffraction",
abstract = "Scanning tunneling microscopy (STM) and X-ray diffractometry (XRD) were applied to investigate the interfacial and bulk structures of 4-[[4-(alkoxy)phenyl]azo]benzoic acids by systematically varying the alkyl chain length. Complete wetting allowed us to perform STM on the crystalline ultrathin film, which was in the thermodynamic state that could be probed by XRD. XRD of the single crystalline, short chain compounds indicates a layered structure with a dimeric, head-to-head configuration with each azobenzene group tilted 70° with respect to the layer boundary. A bilayer model based on XRD spacings of longer homologs suggests that the tilt angle tends to decrease as the length of the alkyl chain increases. STM revealed various images of ordered molecular assemblies crystallized on the graphite surface. Although a head-to-head, bilayer configuration with the azobenzene units lying nearly parallel to the graphite surface was recognized for all homologs, no regularity in the chromophore orientation with respect to the alkyl chain length was observed. These studies show that while the length of alkyl chain controls the molecular orientation in the bulk, interaction of the alkyl chain with the graphite surface produces a variety of the aggregate structures at the interface.",
author = "Masahito Sano and Sasaki, {Darryl Y.} and Munetoshi Isayama and Toyoki Kunitake",
year = "1992",
month = "8",
day = "1",
doi = "10.1021/la00044a004",
language = "English",
volume = "8",
pages = "1893--1902",
journal = "Langmuir",
issn = "0743-7463",
publisher = "American Chemical Society",
number = "8",

}

TY - JOUR

T1 - Interfacial and Bulk Structures of Homologous Series of Azobenzene Amphiphiles Studied by Scanning Tunneling Microscopy and X-ray Diffraction

AU - Sano, Masahito

AU - Sasaki, Darryl Y.

AU - Isayama, Munetoshi

AU - Kunitake, Toyoki

PY - 1992/8/1

Y1 - 1992/8/1

N2 - Scanning tunneling microscopy (STM) and X-ray diffractometry (XRD) were applied to investigate the interfacial and bulk structures of 4-[[4-(alkoxy)phenyl]azo]benzoic acids by systematically varying the alkyl chain length. Complete wetting allowed us to perform STM on the crystalline ultrathin film, which was in the thermodynamic state that could be probed by XRD. XRD of the single crystalline, short chain compounds indicates a layered structure with a dimeric, head-to-head configuration with each azobenzene group tilted 70° with respect to the layer boundary. A bilayer model based on XRD spacings of longer homologs suggests that the tilt angle tends to decrease as the length of the alkyl chain increases. STM revealed various images of ordered molecular assemblies crystallized on the graphite surface. Although a head-to-head, bilayer configuration with the azobenzene units lying nearly parallel to the graphite surface was recognized for all homologs, no regularity in the chromophore orientation with respect to the alkyl chain length was observed. These studies show that while the length of alkyl chain controls the molecular orientation in the bulk, interaction of the alkyl chain with the graphite surface produces a variety of the aggregate structures at the interface.

AB - Scanning tunneling microscopy (STM) and X-ray diffractometry (XRD) were applied to investigate the interfacial and bulk structures of 4-[[4-(alkoxy)phenyl]azo]benzoic acids by systematically varying the alkyl chain length. Complete wetting allowed us to perform STM on the crystalline ultrathin film, which was in the thermodynamic state that could be probed by XRD. XRD of the single crystalline, short chain compounds indicates a layered structure with a dimeric, head-to-head configuration with each azobenzene group tilted 70° with respect to the layer boundary. A bilayer model based on XRD spacings of longer homologs suggests that the tilt angle tends to decrease as the length of the alkyl chain increases. STM revealed various images of ordered molecular assemblies crystallized on the graphite surface. Although a head-to-head, bilayer configuration with the azobenzene units lying nearly parallel to the graphite surface was recognized for all homologs, no regularity in the chromophore orientation with respect to the alkyl chain length was observed. These studies show that while the length of alkyl chain controls the molecular orientation in the bulk, interaction of the alkyl chain with the graphite surface produces a variety of the aggregate structures at the interface.

UR - http://www.scopus.com/inward/record.url?scp=0026901712&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0026901712&partnerID=8YFLogxK

U2 - 10.1021/la00044a004

DO - 10.1021/la00044a004

M3 - Article

AN - SCOPUS:0026901712

VL - 8

SP - 1893

EP - 1902

JO - Langmuir

JF - Langmuir

SN - 0743-7463

IS - 8

ER -