Large Current and Low Voltage Switching Devices Using HTS Thin Film

Tomoaki Ikegami, Kazufumi Shingai, Yukihiko Yamagata, Kenji Ebihara

Research output: Contribution to journalArticlepeer-review

2 Citations (Scopus)

Abstract

A high Temperature Superconducting (HTS) thin film has a potential to control large currents using its transition between a superconducting state and a normal conducting state. In this paper an equivalent circuit model of a HTS thin film is presented to design a power conditioning circuit as an inverter which can handle large currents at voltages less than IV. Device model parameters of a HTS thin film were determined by comparing quenching characteristics calculated by a circuit simulation program (PSpice) with those measured experimentally. A temporal behavior of resistance of the HTS thin film quenched by a self-current which was simulated using the model were compared with experimental results. An inverter circuit using the HTS thin film switched thermally is designed and the characteristic of a switching operation with a photovoltaic cell is also shown.

Original languageEnglish
Pages (from-to)246-249
Number of pages4
JournalIEEE Transactions on Applied Superconductivity
Volume5
Issue number2
DOIs
Publication statusPublished - Jun 1995
Externally publishedYes

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Large Current and Low Voltage Switching Devices Using HTS Thin Film'. Together they form a unique fingerprint.

Cite this