Laser flash-Raman spectroscopy method for the measurement of the thermal properties of micro/nano wires

Jinhui Liu, Haidong Wang, Yudong Hu, Weigang Ma, Xing Zhang

Research output: Contribution to journalArticle

19 Citations (Scopus)

Abstract

This paper introduces a new method for measuring the thermal diffusivity and thermal conductivity of individual micro/nano wires using Raman spectroscopy. This method uses a focused short pulsed laser and a continuous-wave laser in a Raman spectroscopy system as the local heater, Raman signal excitation source, and temperature sensor. Unsteady and steady thermal conduction models are used to get two independent equations for the thermal diffusivity (α) and laser absorptivity (η). This new method is verified by comparing experimental results for graphite carbon fiber with measurement using the 3ω method. The method was then used to measure the temperature dependent thermal diffusivity and thermal conductivity of individual carbon nanotubes.

Original languageEnglish
Article number014901
JournalReview of Scientific Instruments
Volume86
Issue number1
DOIs
Publication statusPublished - Jan 1 2015

Fingerprint

Thermal diffusivity
thermal diffusivity
flash
Raman spectroscopy
Thermodynamic properties
thermodynamic properties
wire
Wire
Lasers
Thermal conductivity
thermal conductivity
lasers
Graphite fibers
conductivity
Continuous wave lasers
continuous wave lasers
temperature sensors
Temperature sensors
carbon fibers
Pulsed lasers

All Science Journal Classification (ASJC) codes

  • Instrumentation

Cite this

Laser flash-Raman spectroscopy method for the measurement of the thermal properties of micro/nano wires. / Liu, Jinhui; Wang, Haidong; Hu, Yudong; Ma, Weigang; Zhang, Xing.

In: Review of Scientific Instruments, Vol. 86, No. 1, 014901, 01.01.2015.

Research output: Contribution to journalArticle

Liu, Jinhui ; Wang, Haidong ; Hu, Yudong ; Ma, Weigang ; Zhang, Xing. / Laser flash-Raman spectroscopy method for the measurement of the thermal properties of micro/nano wires. In: Review of Scientific Instruments. 2015 ; Vol. 86, No. 1.
@article{f786b22f6c9547738da7e5fbd9c42bb0,
title = "Laser flash-Raman spectroscopy method for the measurement of the thermal properties of micro/nano wires",
abstract = "This paper introduces a new method for measuring the thermal diffusivity and thermal conductivity of individual micro/nano wires using Raman spectroscopy. This method uses a focused short pulsed laser and a continuous-wave laser in a Raman spectroscopy system as the local heater, Raman signal excitation source, and temperature sensor. Unsteady and steady thermal conduction models are used to get two independent equations for the thermal diffusivity (α) and laser absorptivity (η). This new method is verified by comparing experimental results for graphite carbon fiber with measurement using the 3ω method. The method was then used to measure the temperature dependent thermal diffusivity and thermal conductivity of individual carbon nanotubes.",
author = "Jinhui Liu and Haidong Wang and Yudong Hu and Weigang Ma and Xing Zhang",
year = "2015",
month = "1",
day = "1",
doi = "10.1063/1.4904868",
language = "English",
volume = "86",
journal = "Review of Scientific Instruments",
issn = "0034-6748",
publisher = "American Institute of Physics Publising LLC",
number = "1",

}

TY - JOUR

T1 - Laser flash-Raman spectroscopy method for the measurement of the thermal properties of micro/nano wires

AU - Liu, Jinhui

AU - Wang, Haidong

AU - Hu, Yudong

AU - Ma, Weigang

AU - Zhang, Xing

PY - 2015/1/1

Y1 - 2015/1/1

N2 - This paper introduces a new method for measuring the thermal diffusivity and thermal conductivity of individual micro/nano wires using Raman spectroscopy. This method uses a focused short pulsed laser and a continuous-wave laser in a Raman spectroscopy system as the local heater, Raman signal excitation source, and temperature sensor. Unsteady and steady thermal conduction models are used to get two independent equations for the thermal diffusivity (α) and laser absorptivity (η). This new method is verified by comparing experimental results for graphite carbon fiber with measurement using the 3ω method. The method was then used to measure the temperature dependent thermal diffusivity and thermal conductivity of individual carbon nanotubes.

AB - This paper introduces a new method for measuring the thermal diffusivity and thermal conductivity of individual micro/nano wires using Raman spectroscopy. This method uses a focused short pulsed laser and a continuous-wave laser in a Raman spectroscopy system as the local heater, Raman signal excitation source, and temperature sensor. Unsteady and steady thermal conduction models are used to get two independent equations for the thermal diffusivity (α) and laser absorptivity (η). This new method is verified by comparing experimental results for graphite carbon fiber with measurement using the 3ω method. The method was then used to measure the temperature dependent thermal diffusivity and thermal conductivity of individual carbon nanotubes.

UR - http://www.scopus.com/inward/record.url?scp=84937200443&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84937200443&partnerID=8YFLogxK

U2 - 10.1063/1.4904868

DO - 10.1063/1.4904868

M3 - Article

AN - SCOPUS:84937200443

VL - 86

JO - Review of Scientific Instruments

JF - Review of Scientific Instruments

SN - 0034-6748

IS - 1

M1 - 014901

ER -