Liquid phase sintering of Fe-Cu super-saturated solid solution powders produced by mechanical alloying

Yuuji Kimura, Setsuo Takaki, Hideto Goto

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

The super-saturated solid solution of Fe-Cu powders are prepared by mechanical alloying of the elemental Fe and Cu powders, and the sintering behavior of the mechanically alloyed powders is investigated together with the separation behavior of the liquid Cu phase. It is indicated that the chemical compositions of the mechanically alloyed powders are 10approx.33 mass%Cu. The powders obtained are very hard in the as-milled state, hence, they are subjected to a softening treatments of 1173 K-0.6 ks, and then compacted to test pieces using metallic die. Sintering of the powder compacts is performed at 1373 K which is just above the melting point of copper.

Original languageEnglish
Pages (from-to)1278-1285
Number of pages8
JournalNippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
Volume59
Issue number12
DOIs
Publication statusPublished - Jan 1 1995

Fingerprint

liquid phase sintering
Liquid phase sintering
Mechanical alloying
Powders
alloying
Solid solutions
solid solutions
sintering
Sintering
softening
melting points
Melting point
Copper
chemical composition
copper
Liquids
liquids
Chemical analysis

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Mechanics of Materials
  • Metals and Alloys
  • Materials Chemistry

Cite this

Liquid phase sintering of Fe-Cu super-saturated solid solution powders produced by mechanical alloying. / Kimura, Yuuji; Takaki, Setsuo; Goto, Hideto.

In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, Vol. 59, No. 12, 01.01.1995, p. 1278-1285.

Research output: Contribution to journalArticle

@article{d91c1c321c084a16ba1a338d2d0cb8b6,
title = "Liquid phase sintering of Fe-Cu super-saturated solid solution powders produced by mechanical alloying",
abstract = "The super-saturated solid solution of Fe-Cu powders are prepared by mechanical alloying of the elemental Fe and Cu powders, and the sintering behavior of the mechanically alloyed powders is investigated together with the separation behavior of the liquid Cu phase. It is indicated that the chemical compositions of the mechanically alloyed powders are 10approx.33 mass{\%}Cu. The powders obtained are very hard in the as-milled state, hence, they are subjected to a softening treatments of 1173 K-0.6 ks, and then compacted to test pieces using metallic die. Sintering of the powder compacts is performed at 1373 K which is just above the melting point of copper.",
author = "Yuuji Kimura and Setsuo Takaki and Hideto Goto",
year = "1995",
month = "1",
day = "1",
doi = "10.2320/jinstmet1952.59.12_1278",
language = "English",
volume = "59",
pages = "1278--1285",
journal = "Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals",
issn = "0021-4876",
publisher = "公益社団法人 日本金属学会",
number = "12",

}

TY - JOUR

T1 - Liquid phase sintering of Fe-Cu super-saturated solid solution powders produced by mechanical alloying

AU - Kimura, Yuuji

AU - Takaki, Setsuo

AU - Goto, Hideto

PY - 1995/1/1

Y1 - 1995/1/1

N2 - The super-saturated solid solution of Fe-Cu powders are prepared by mechanical alloying of the elemental Fe and Cu powders, and the sintering behavior of the mechanically alloyed powders is investigated together with the separation behavior of the liquid Cu phase. It is indicated that the chemical compositions of the mechanically alloyed powders are 10approx.33 mass%Cu. The powders obtained are very hard in the as-milled state, hence, they are subjected to a softening treatments of 1173 K-0.6 ks, and then compacted to test pieces using metallic die. Sintering of the powder compacts is performed at 1373 K which is just above the melting point of copper.

AB - The super-saturated solid solution of Fe-Cu powders are prepared by mechanical alloying of the elemental Fe and Cu powders, and the sintering behavior of the mechanically alloyed powders is investigated together with the separation behavior of the liquid Cu phase. It is indicated that the chemical compositions of the mechanically alloyed powders are 10approx.33 mass%Cu. The powders obtained are very hard in the as-milled state, hence, they are subjected to a softening treatments of 1173 K-0.6 ks, and then compacted to test pieces using metallic die. Sintering of the powder compacts is performed at 1373 K which is just above the melting point of copper.

UR - http://www.scopus.com/inward/record.url?scp=0029531343&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0029531343&partnerID=8YFLogxK

U2 - 10.2320/jinstmet1952.59.12_1278

DO - 10.2320/jinstmet1952.59.12_1278

M3 - Article

VL - 59

SP - 1278

EP - 1285

JO - Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals

JF - Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals

SN - 0021-4876

IS - 12

ER -