Liquid waste decomposition by long DC arc under atmospheric pressure

Tianming Li, Takayuki Watanabe, Kaoru Ochi, Koji Otsuki

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

A model substance of biphenyl solution was used for the study of polychlorinated biphenyls (PCBs) decomposition. Biphenyl has the same chemical and molecular structure with the PCBs. Because of the severe toxicity of PCBs. the biphenyl was introduced instead of the PCBs. The biphenyl solution was directly injected to a long DC arc as a fine spray with argon carrier gas. The long DC arc system with a 350mm arc length was operated under atmospheric pressure at a 20kW DC power supply. The plasma gas of argon containing decomposition products was bubbled through ethanol to remove the decomposition products. The dissolved ingredients of decomposition products in ethanol were defined as liquid by-products, while the gas by-products are insoluble in ethanol as exhaust gas. The gas by-products of H2, CH4, and CO were identified with gas chromatography. The liquid by-products of benzene, toluene, phenylacetylene, styrene, indene, naphthalene, biphenyl, acenaphthylene, fluorine, phenanthrene and 4,5-methylenephenanthrene were qualitatively analyzed by a gas chromatography-mass spectrometry and were quantitatively measured by a high performance liquid chromatography. When introducing a sufficient oxygen into the arc, the high decomposition efficiencies of 99.83% biphenyl and 100% acetone were achieved and the by-products of gas and liquid are suppressed to convert to a desirable product of CO2. For the formation of liquid by-products, C6H5, CH3, and C2H2 are the important intermediates in low temperature region. Pyrolysis of biphenyl solution is initiated from the C6H5 to the polycyclic aromatic hydrocarbons (PAHs).

Original languageEnglish
Pages (from-to)155-162
Number of pages8
JournalChemical Engineering Journal
Volume231
DOIs
Publication statusPublished - Sep 1 2013

Fingerprint

atmospheric pressure
Atmospheric pressure
Byproducts
decomposition
Polychlorinated biphenyls
Decomposition
Polychlorinated Biphenyls
PCB
Liquids
Gases
ethanol
gas
liquid
Ethanol
argon
Argon
Gas chromatography
gas chromatography
Plasma Gases
High performance liquid chromatography

All Science Journal Classification (ASJC) codes

  • Chemistry(all)
  • Environmental Chemistry
  • Chemical Engineering(all)
  • Industrial and Manufacturing Engineering

Cite this

Liquid waste decomposition by long DC arc under atmospheric pressure. / Li, Tianming; Watanabe, Takayuki; Ochi, Kaoru; Otsuki, Koji.

In: Chemical Engineering Journal, Vol. 231, 01.09.2013, p. 155-162.

Research output: Contribution to journalArticle

Li, Tianming ; Watanabe, Takayuki ; Ochi, Kaoru ; Otsuki, Koji. / Liquid waste decomposition by long DC arc under atmospheric pressure. In: Chemical Engineering Journal. 2013 ; Vol. 231. pp. 155-162.
@article{d334b7262dfe48de90ffda92fcdacfdb,
title = "Liquid waste decomposition by long DC arc under atmospheric pressure",
abstract = "A model substance of biphenyl solution was used for the study of polychlorinated biphenyls (PCBs) decomposition. Biphenyl has the same chemical and molecular structure with the PCBs. Because of the severe toxicity of PCBs. the biphenyl was introduced instead of the PCBs. The biphenyl solution was directly injected to a long DC arc as a fine spray with argon carrier gas. The long DC arc system with a 350mm arc length was operated under atmospheric pressure at a 20kW DC power supply. The plasma gas of argon containing decomposition products was bubbled through ethanol to remove the decomposition products. The dissolved ingredients of decomposition products in ethanol were defined as liquid by-products, while the gas by-products are insoluble in ethanol as exhaust gas. The gas by-products of H2, CH4, and CO were identified with gas chromatography. The liquid by-products of benzene, toluene, phenylacetylene, styrene, indene, naphthalene, biphenyl, acenaphthylene, fluorine, phenanthrene and 4,5-methylenephenanthrene were qualitatively analyzed by a gas chromatography-mass spectrometry and were quantitatively measured by a high performance liquid chromatography. When introducing a sufficient oxygen into the arc, the high decomposition efficiencies of 99.83{\%} biphenyl and 100{\%} acetone were achieved and the by-products of gas and liquid are suppressed to convert to a desirable product of CO2. For the formation of liquid by-products, C6H5, CH3, and C2H2 are the important intermediates in low temperature region. Pyrolysis of biphenyl solution is initiated from the C6H5 to the polycyclic aromatic hydrocarbons (PAHs).",
author = "Tianming Li and Takayuki Watanabe and Kaoru Ochi and Koji Otsuki",
year = "2013",
month = "9",
day = "1",
doi = "10.1016/j.cej.2013.07.003",
language = "English",
volume = "231",
pages = "155--162",
journal = "Chemical Engineering Journal",
issn = "1385-8947",
publisher = "Elsevier",

}

TY - JOUR

T1 - Liquid waste decomposition by long DC arc under atmospheric pressure

AU - Li, Tianming

AU - Watanabe, Takayuki

AU - Ochi, Kaoru

AU - Otsuki, Koji

PY - 2013/9/1

Y1 - 2013/9/1

N2 - A model substance of biphenyl solution was used for the study of polychlorinated biphenyls (PCBs) decomposition. Biphenyl has the same chemical and molecular structure with the PCBs. Because of the severe toxicity of PCBs. the biphenyl was introduced instead of the PCBs. The biphenyl solution was directly injected to a long DC arc as a fine spray with argon carrier gas. The long DC arc system with a 350mm arc length was operated under atmospheric pressure at a 20kW DC power supply. The plasma gas of argon containing decomposition products was bubbled through ethanol to remove the decomposition products. The dissolved ingredients of decomposition products in ethanol were defined as liquid by-products, while the gas by-products are insoluble in ethanol as exhaust gas. The gas by-products of H2, CH4, and CO were identified with gas chromatography. The liquid by-products of benzene, toluene, phenylacetylene, styrene, indene, naphthalene, biphenyl, acenaphthylene, fluorine, phenanthrene and 4,5-methylenephenanthrene were qualitatively analyzed by a gas chromatography-mass spectrometry and were quantitatively measured by a high performance liquid chromatography. When introducing a sufficient oxygen into the arc, the high decomposition efficiencies of 99.83% biphenyl and 100% acetone were achieved and the by-products of gas and liquid are suppressed to convert to a desirable product of CO2. For the formation of liquid by-products, C6H5, CH3, and C2H2 are the important intermediates in low temperature region. Pyrolysis of biphenyl solution is initiated from the C6H5 to the polycyclic aromatic hydrocarbons (PAHs).

AB - A model substance of biphenyl solution was used for the study of polychlorinated biphenyls (PCBs) decomposition. Biphenyl has the same chemical and molecular structure with the PCBs. Because of the severe toxicity of PCBs. the biphenyl was introduced instead of the PCBs. The biphenyl solution was directly injected to a long DC arc as a fine spray with argon carrier gas. The long DC arc system with a 350mm arc length was operated under atmospheric pressure at a 20kW DC power supply. The plasma gas of argon containing decomposition products was bubbled through ethanol to remove the decomposition products. The dissolved ingredients of decomposition products in ethanol were defined as liquid by-products, while the gas by-products are insoluble in ethanol as exhaust gas. The gas by-products of H2, CH4, and CO were identified with gas chromatography. The liquid by-products of benzene, toluene, phenylacetylene, styrene, indene, naphthalene, biphenyl, acenaphthylene, fluorine, phenanthrene and 4,5-methylenephenanthrene were qualitatively analyzed by a gas chromatography-mass spectrometry and were quantitatively measured by a high performance liquid chromatography. When introducing a sufficient oxygen into the arc, the high decomposition efficiencies of 99.83% biphenyl and 100% acetone were achieved and the by-products of gas and liquid are suppressed to convert to a desirable product of CO2. For the formation of liquid by-products, C6H5, CH3, and C2H2 are the important intermediates in low temperature region. Pyrolysis of biphenyl solution is initiated from the C6H5 to the polycyclic aromatic hydrocarbons (PAHs).

UR - http://www.scopus.com/inward/record.url?scp=84881244824&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84881244824&partnerID=8YFLogxK

U2 - 10.1016/j.cej.2013.07.003

DO - 10.1016/j.cej.2013.07.003

M3 - Article

AN - SCOPUS:84881244824

VL - 231

SP - 155

EP - 162

JO - Chemical Engineering Journal

JF - Chemical Engineering Journal

SN - 1385-8947

ER -