Magnetometer utilizing SQUID pico-voltmeter and cooled normal pickup coil

Tong Qing Yang, Kenichiro Yao, Daisuke Yamasaki, Keiji Enpuku

Research output: Contribution to journalConference articlepeer-review

1 Citation (Scopus)

Abstract

Magnetometer utilizing a high-Tc SQUID pico-voltometer and cooled normal pickup coil has been developed. The pickup coil was made of copper wire, and cooled to T = 77 K in order to decrease thermal noise from resistance. Total voltage noise of the SQUID pico-voltmeter with a cooled pickup coil was 124 pV/Hz1/2 and 96 pV/Hz1/2 at 100 Hz and 1 kHz, respectively, when resistance of the coil was 1.5 Ω. The magnetic field noise of the magnetometer was 130 pT/Hz1/2 and 10 pT/Hz 1/2 at 100 Hz and 1 kHz for the pickup coil with 4.4 mm diameter, respectively. Application of the magnetometer to non-destructive evaluation was presented. It is shown that small crack inside Cu plate can be detected with this system in unshielded environment. It was also shown that scanning of the pickup coil in unshielded environment is possible without degradation of the system performance.

Original languageEnglish
Pages (from-to)1596-1600
Number of pages5
JournalPhysica C: Superconductivity and its applications
Volume426-431
Issue numberII
DOIs
Publication statusPublished - Oct 7 2005
EventProceedings of the 17th Internatioanl Symposium on Superconductivity (ISS 2004) Advances in Superconductivity -
Duration: Nov 23 2004Nov 25 2004

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Energy Engineering and Power Technology
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Magnetometer utilizing SQUID pico-voltmeter and cooled normal pickup coil'. Together they form a unique fingerprint.

Cite this