Measurement of flow Characteristics of Viscoelastic Fluid by Mach-Zehnder Interferometry

Kazumori Funatsu, Toshihisa Kajiwara, Hiroyuki Nishimura

Research output: Contribution to journalArticle

Abstract

Mach-Zehnder interferometry, as applied to the stress analysis of solid materials, was employed to investigate the flow of viscoelastic fluids. With this method, secondary principal values of a refractive index ellipsoid can be measured because a reference light is used. This is in contrast to the birefringence method, in which only the difference of principal values can be evaluated. A Poiseuille flow between two parallel plates was selected as a flow field. Schemes for measurement of direct and transverse stress optical coefficients, C1and C2, and absolute values of normal stresses were derived for each case where either poralized or nonpolarized light is led through the test section in the flow direction, the direction perpendicular to the shear plane, or the neutral direction. Such quantities can be evaluated if the phase difference can be measured as a function of shear stress and pressure on the wall and a stress optical coefficient C1-C2is known in advance. Preliminary experiments for polyethylene and polystyrene melts were carried out with the polarized light perpendicular to the shear plane. However measurements accurate enough to allow evaluation of the normal stresses etc. have not been attained in this study.

Original languageEnglish
Pages (from-to)30-36
Number of pages7
JournalNihon Reoroji Gakkaishi(Journal of the Society of Rheology, Japan)
Volume14
Issue number1
DOIs
Publication statusPublished - Jan 1 1986

Fingerprint

flow characteristics
Interferometry
Mach number
interferometry
Fluids
fluids
shear
stress analysis
Polystyrenes
Polyethylene
Light polarization
coefficients
ellipsoids
Birefringence
Stress analysis
parallel plates
laminar flow
polarized light
shear stress
birefringence

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Measurement of flow Characteristics of Viscoelastic Fluid by Mach-Zehnder Interferometry. / Funatsu, Kazumori; Kajiwara, Toshihisa; Nishimura, Hiroyuki.

In: Nihon Reoroji Gakkaishi(Journal of the Society of Rheology, Japan), Vol. 14, No. 1, 01.01.1986, p. 30-36.

Research output: Contribution to journalArticle

@article{b7b19a0ae05c40dc9351ae2fef835571,
title = "Measurement of flow Characteristics of Viscoelastic Fluid by Mach-Zehnder Interferometry",
abstract = "Mach-Zehnder interferometry, as applied to the stress analysis of solid materials, was employed to investigate the flow of viscoelastic fluids. With this method, secondary principal values of a refractive index ellipsoid can be measured because a reference light is used. This is in contrast to the birefringence method, in which only the difference of principal values can be evaluated. A Poiseuille flow between two parallel plates was selected as a flow field. Schemes for measurement of direct and transverse stress optical coefficients, C1and C2, and absolute values of normal stresses were derived for each case where either poralized or nonpolarized light is led through the test section in the flow direction, the direction perpendicular to the shear plane, or the neutral direction. Such quantities can be evaluated if the phase difference can be measured as a function of shear stress and pressure on the wall and a stress optical coefficient C1-C2is known in advance. Preliminary experiments for polyethylene and polystyrene melts were carried out with the polarized light perpendicular to the shear plane. However measurements accurate enough to allow evaluation of the normal stresses etc. have not been attained in this study.",
author = "Kazumori Funatsu and Toshihisa Kajiwara and Hiroyuki Nishimura",
year = "1986",
month = "1",
day = "1",
doi = "10.1678/rheology1973.14.1_30",
language = "English",
volume = "14",
pages = "30--36",
journal = "Nihon Reoroji Gakkaishi",
issn = "0387-1533",
publisher = "Society of Rheology",
number = "1",

}

TY - JOUR

T1 - Measurement of flow Characteristics of Viscoelastic Fluid by Mach-Zehnder Interferometry

AU - Funatsu, Kazumori

AU - Kajiwara, Toshihisa

AU - Nishimura, Hiroyuki

PY - 1986/1/1

Y1 - 1986/1/1

N2 - Mach-Zehnder interferometry, as applied to the stress analysis of solid materials, was employed to investigate the flow of viscoelastic fluids. With this method, secondary principal values of a refractive index ellipsoid can be measured because a reference light is used. This is in contrast to the birefringence method, in which only the difference of principal values can be evaluated. A Poiseuille flow between two parallel plates was selected as a flow field. Schemes for measurement of direct and transverse stress optical coefficients, C1and C2, and absolute values of normal stresses were derived for each case where either poralized or nonpolarized light is led through the test section in the flow direction, the direction perpendicular to the shear plane, or the neutral direction. Such quantities can be evaluated if the phase difference can be measured as a function of shear stress and pressure on the wall and a stress optical coefficient C1-C2is known in advance. Preliminary experiments for polyethylene and polystyrene melts were carried out with the polarized light perpendicular to the shear plane. However measurements accurate enough to allow evaluation of the normal stresses etc. have not been attained in this study.

AB - Mach-Zehnder interferometry, as applied to the stress analysis of solid materials, was employed to investigate the flow of viscoelastic fluids. With this method, secondary principal values of a refractive index ellipsoid can be measured because a reference light is used. This is in contrast to the birefringence method, in which only the difference of principal values can be evaluated. A Poiseuille flow between two parallel plates was selected as a flow field. Schemes for measurement of direct and transverse stress optical coefficients, C1and C2, and absolute values of normal stresses were derived for each case where either poralized or nonpolarized light is led through the test section in the flow direction, the direction perpendicular to the shear plane, or the neutral direction. Such quantities can be evaluated if the phase difference can be measured as a function of shear stress and pressure on the wall and a stress optical coefficient C1-C2is known in advance. Preliminary experiments for polyethylene and polystyrene melts were carried out with the polarized light perpendicular to the shear plane. However measurements accurate enough to allow evaluation of the normal stresses etc. have not been attained in this study.

UR - http://www.scopus.com/inward/record.url?scp=85007687211&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85007687211&partnerID=8YFLogxK

U2 - 10.1678/rheology1973.14.1_30

DO - 10.1678/rheology1973.14.1_30

M3 - Article

AN - SCOPUS:85007687211

VL - 14

SP - 30

EP - 36

JO - Nihon Reoroji Gakkaishi

JF - Nihon Reoroji Gakkaishi

SN - 0387-1533

IS - 1

ER -