Measurement of heating coil temperature for e-cigarettes with a “top-coil” clearomizer

Wenhao Chen, Ping Wang, Kazuhide Ito, Jeff Fowles, Dennis Shusterman, Peter A. Jaques, Kazukiyo Kumagai

Research output: Contribution to journalArticle

14 Citations (Scopus)

Abstract

Objectives To determine the effect of applied power settings, coil wetness conditions, and e-liquid compositions on the coil heating temperature for e-cigarettes with a “top-coil” clearomizer, and to make associations of coil conditions with emission of toxic carbonyl compounds by combining results herein with the literature. Methods The coil temperature of a second generation e-cigarette was measured at various applied power levels, coil conditions, and e-liquid compositions, including (1) measurements by thermocouple at three e-liquid fill levels (dry, wet-through-wick, and full-wet), three coil resistances (low, standard, and high), and four voltage settings (3–6 V) for multiple coils using propylene glycol (PG) as a test liquid; (2) measurements by thermocouple at additional degrees of coil wetness for a high resistance coil using PG; and (3) measurements by both thermocouple and infrared (IR) camera for high resistance coils using PG alone and a 1:1 (wt/wt) mixture of PG and glycerol (PG/GL). Results For single point thermocouple measurements with PG, coil temperatures ranged from 322 – 1008C, 145 – 334C, and 110 – 185C under dry, wet-through-wick, and full-wet conditions, respectively, for the total of 13 replaceable coil heads. For conditions measured with both a thermocouple and an IR camera, all thermocouple measurements were between the minimum and maximum across-coil IR camera measurements and equal to 74% – 115% of the across-coil mean, depending on test conditions. The IR camera showed details of the nonuniform temperature distribution across heating coils. The large temperature variations under wet-through-wick conditions may explain the large variations in formaldehyde formation rate reported in the literature for such “top-coil” clearomizers. Conclusions This study established a simple and straight-forward protocol to systematically measure e-cigarette coil heating temperature under dry, wet-through-wick, and full-wet conditions. In addition to applied power, the composition of e-liquid, and the devices’ ability to efficiently deliver e-liquid to the heating coil are important product design factors effecting coil operating temperature. Precautionary temperature checks on e-cigarettes under manufacturer-recommended normal use conditions may help to reduce the health risks from exposure to toxic carbonyl emissions associated with coil overheating.

Original languageEnglish
Article numbere0195925
JournalPloS one
Volume13
Issue number4
DOIs
Publication statusPublished - Apr 2018

All Science Journal Classification (ASJC) codes

  • Biochemistry, Genetics and Molecular Biology(all)
  • Agricultural and Biological Sciences(all)
  • General

Fingerprint Dive into the research topics of 'Measurement of heating coil temperature for e-cigarettes with a “top-coil” clearomizer'. Together they form a unique fingerprint.

  • Cite this

    Chen, W., Wang, P., Ito, K., Fowles, J., Shusterman, D., Jaques, P. A., & Kumagai, K. (2018). Measurement of heating coil temperature for e-cigarettes with a “top-coil” clearomizer. PloS one, 13(4), [e0195925]. https://doi.org/10.1371/journal.pone.0195925