Measurement of neutron-production cross sections for 290MeV/u carbon ion incidence

D. Moriguchi, Y. Nakamura, T. Kajimoto, Y. Koba, M. Ueyama, M. Yoshioka, Nobuhiro Shigyo, Yusuke Uozumi, D. Satoh, T. Sanami, M. Takada, N. Matsufuji

Research output: Contribution to journalArticle

Abstract

Neutron-production double-differential cross sections for 290 MeV/u carbon-ion incidence on car- bon target were measured with NE213 liquid organic scintillators by time-of-flight technique. NE213 liquid organic scintillators 12.7 cm in diameter and 12.7 cm thick were placed in the directions of 15°, 30°, 45°, 60°, 75° and 90°. The typical flight path length was 4.0 m. In order to reduce neutrons from the beam dump, an iron and a concrete shield was placed between the detectors and the beam dump. For measurement of background, a shadow bar was set between the target and each detector. Neutron detection efficiencies were obtained by calculations with a Monte Carlo sim- ulation code SCINFUL-QMD. The cross sections were obtained for neutron energy above 2.8 MeV. The experimental results were compared with the calculation data of the PHITS code.

Original languageEnglish
Pages (from-to)1789-1792
Number of pages4
JournalJournal of the Korean Physical Society
Volume59
Issue number23
DOIs
Publication statusPublished - Aug 1 2011

Fingerprint

incidence
neutrons
organic liquids
carbon
cross sections
scintillation counters
ions
flight paths
detectors
iron
simulation
energy

All Science Journal Classification (ASJC) codes

  • Physics and Astronomy(all)

Cite this

Moriguchi, D., Nakamura, Y., Kajimoto, T., Koba, Y., Ueyama, M., Yoshioka, M., ... Matsufuji, N. (2011). Measurement of neutron-production cross sections for 290MeV/u carbon ion incidence. Journal of the Korean Physical Society, 59(23), 1789-1792. https://doi.org/10.3938/jkps.59.1789

Measurement of neutron-production cross sections for 290MeV/u carbon ion incidence. / Moriguchi, D.; Nakamura, Y.; Kajimoto, T.; Koba, Y.; Ueyama, M.; Yoshioka, M.; Shigyo, Nobuhiro; Uozumi, Yusuke; Satoh, D.; Sanami, T.; Takada, M.; Matsufuji, N.

In: Journal of the Korean Physical Society, Vol. 59, No. 23, 01.08.2011, p. 1789-1792.

Research output: Contribution to journalArticle

Moriguchi, D, Nakamura, Y, Kajimoto, T, Koba, Y, Ueyama, M, Yoshioka, M, Shigyo, N, Uozumi, Y, Satoh, D, Sanami, T, Takada, M & Matsufuji, N 2011, 'Measurement of neutron-production cross sections for 290MeV/u carbon ion incidence', Journal of the Korean Physical Society, vol. 59, no. 23, pp. 1789-1792. https://doi.org/10.3938/jkps.59.1789
Moriguchi D, Nakamura Y, Kajimoto T, Koba Y, Ueyama M, Yoshioka M et al. Measurement of neutron-production cross sections for 290MeV/u carbon ion incidence. Journal of the Korean Physical Society. 2011 Aug 1;59(23):1789-1792. https://doi.org/10.3938/jkps.59.1789
Moriguchi, D. ; Nakamura, Y. ; Kajimoto, T. ; Koba, Y. ; Ueyama, M. ; Yoshioka, M. ; Shigyo, Nobuhiro ; Uozumi, Yusuke ; Satoh, D. ; Sanami, T. ; Takada, M. ; Matsufuji, N. / Measurement of neutron-production cross sections for 290MeV/u carbon ion incidence. In: Journal of the Korean Physical Society. 2011 ; Vol. 59, No. 23. pp. 1789-1792.
@article{55367b2c3c2347008072642380ae2da1,
title = "Measurement of neutron-production cross sections for 290MeV/u carbon ion incidence",
abstract = "Neutron-production double-differential cross sections for 290 MeV/u carbon-ion incidence on car- bon target were measured with NE213 liquid organic scintillators by time-of-flight technique. NE213 liquid organic scintillators 12.7 cm in diameter and 12.7 cm thick were placed in the directions of 15°, 30°, 45°, 60°, 75° and 90°. The typical flight path length was 4.0 m. In order to reduce neutrons from the beam dump, an iron and a concrete shield was placed between the detectors and the beam dump. For measurement of background, a shadow bar was set between the target and each detector. Neutron detection efficiencies were obtained by calculations with a Monte Carlo sim- ulation code SCINFUL-QMD. The cross sections were obtained for neutron energy above 2.8 MeV. The experimental results were compared with the calculation data of the PHITS code.",
author = "D. Moriguchi and Y. Nakamura and T. Kajimoto and Y. Koba and M. Ueyama and M. Yoshioka and Nobuhiro Shigyo and Yusuke Uozumi and D. Satoh and T. Sanami and M. Takada and N. Matsufuji",
year = "2011",
month = "8",
day = "1",
doi = "10.3938/jkps.59.1789",
language = "English",
volume = "59",
pages = "1789--1792",
journal = "Journal of the Korean Physical Society",
issn = "0374-4884",
publisher = "Korean Physical Society",
number = "23",

}

TY - JOUR

T1 - Measurement of neutron-production cross sections for 290MeV/u carbon ion incidence

AU - Moriguchi, D.

AU - Nakamura, Y.

AU - Kajimoto, T.

AU - Koba, Y.

AU - Ueyama, M.

AU - Yoshioka, M.

AU - Shigyo, Nobuhiro

AU - Uozumi, Yusuke

AU - Satoh, D.

AU - Sanami, T.

AU - Takada, M.

AU - Matsufuji, N.

PY - 2011/8/1

Y1 - 2011/8/1

N2 - Neutron-production double-differential cross sections for 290 MeV/u carbon-ion incidence on car- bon target were measured with NE213 liquid organic scintillators by time-of-flight technique. NE213 liquid organic scintillators 12.7 cm in diameter and 12.7 cm thick were placed in the directions of 15°, 30°, 45°, 60°, 75° and 90°. The typical flight path length was 4.0 m. In order to reduce neutrons from the beam dump, an iron and a concrete shield was placed between the detectors and the beam dump. For measurement of background, a shadow bar was set between the target and each detector. Neutron detection efficiencies were obtained by calculations with a Monte Carlo sim- ulation code SCINFUL-QMD. The cross sections were obtained for neutron energy above 2.8 MeV. The experimental results were compared with the calculation data of the PHITS code.

AB - Neutron-production double-differential cross sections for 290 MeV/u carbon-ion incidence on car- bon target were measured with NE213 liquid organic scintillators by time-of-flight technique. NE213 liquid organic scintillators 12.7 cm in diameter and 12.7 cm thick were placed in the directions of 15°, 30°, 45°, 60°, 75° and 90°. The typical flight path length was 4.0 m. In order to reduce neutrons from the beam dump, an iron and a concrete shield was placed between the detectors and the beam dump. For measurement of background, a shadow bar was set between the target and each detector. Neutron detection efficiencies were obtained by calculations with a Monte Carlo sim- ulation code SCINFUL-QMD. The cross sections were obtained for neutron energy above 2.8 MeV. The experimental results were compared with the calculation data of the PHITS code.

UR - http://www.scopus.com/inward/record.url?scp=80052242786&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=80052242786&partnerID=8YFLogxK

U2 - 10.3938/jkps.59.1789

DO - 10.3938/jkps.59.1789

M3 - Article

AN - SCOPUS:80052242786

VL - 59

SP - 1789

EP - 1792

JO - Journal of the Korean Physical Society

JF - Journal of the Korean Physical Society

SN - 0374-4884

IS - 23

ER -