Measurement of the microlayer characteristics in the whole range of nucleate boiling for water by laser interferometry

Zhihao Chen, Xiaocheng Hu, Kang Hu, Yoshio Utaka, Shoji Mori

Research output: Contribution to journalArticle

Abstract

During nucleate boiling, a thin liquid film (microlayer) is formed beneath a boiling bubble when the bubble undergoes rapid growth/expansion. The linear distribution of the microlayer has been previously confirmed, and its crest shape has been observed in the isolated bubble region of nucleate boiling. However, the microlayer behavior in larger heat flux regions up to critical heat flux has not yet been elucidated. In this study, to further understand the microlayer structure in the whole heat flux range of nucleate boiling, microlayer configuration was measured using laser interferometry. Water was adopted as the test fluid, and it is confirmed that the microlayer can be observed over a whole range of nucleate boiling containing the critical heat flux point. It is also confirmed that the deformation of the microlayer from axisymmetric shape was caused by complicated, irregular bubble motions such as bubble coalescence, which was observed for relatively higher heat flux. The crest shape of the microlayer, which appears near the periphery of its maximum diameter under relatively smaller heat flux, was not observed at a relatively higher heat flux. Finally, it is confirmed that heat flux does not obviously influence the thickness distribution of the initial microlayer.

Original languageEnglish
Article number118856
JournalInternational Journal of Heat and Mass Transfer
Volume146
DOIs
Publication statusPublished - Jan 2020

Fingerprint

Laser interferometry
nucleate boiling
laser interferometry
Nucleate boiling
Heat flux
heat flux
Water
bubbles
water
Bubbles (in fluids)
Liquid films
Coalescence
boiling
Boiling liquids
coalescing
Thin films
expansion
Fluids
fluids

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Mechanical Engineering
  • Fluid Flow and Transfer Processes

Cite this

Measurement of the microlayer characteristics in the whole range of nucleate boiling for water by laser interferometry. / Chen, Zhihao; Hu, Xiaocheng; Hu, Kang; Utaka, Yoshio; Mori, Shoji.

In: International Journal of Heat and Mass Transfer, Vol. 146, 118856, 01.2020.

Research output: Contribution to journalArticle

@article{33d4f1fdfead4ef19957fcbfd2e091c9,
title = "Measurement of the microlayer characteristics in the whole range of nucleate boiling for water by laser interferometry",
abstract = "During nucleate boiling, a thin liquid film (microlayer) is formed beneath a boiling bubble when the bubble undergoes rapid growth/expansion. The linear distribution of the microlayer has been previously confirmed, and its crest shape has been observed in the isolated bubble region of nucleate boiling. However, the microlayer behavior in larger heat flux regions up to critical heat flux has not yet been elucidated. In this study, to further understand the microlayer structure in the whole heat flux range of nucleate boiling, microlayer configuration was measured using laser interferometry. Water was adopted as the test fluid, and it is confirmed that the microlayer can be observed over a whole range of nucleate boiling containing the critical heat flux point. It is also confirmed that the deformation of the microlayer from axisymmetric shape was caused by complicated, irregular bubble motions such as bubble coalescence, which was observed for relatively higher heat flux. The crest shape of the microlayer, which appears near the periphery of its maximum diameter under relatively smaller heat flux, was not observed at a relatively higher heat flux. Finally, it is confirmed that heat flux does not obviously influence the thickness distribution of the initial microlayer.",
author = "Zhihao Chen and Xiaocheng Hu and Kang Hu and Yoshio Utaka and Shoji Mori",
year = "2020",
month = "1",
doi = "10.1016/j.ijheatmasstransfer.2019.118856",
language = "English",
volume = "146",
journal = "International Journal of Heat and Mass Transfer",
issn = "0017-9310",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - Measurement of the microlayer characteristics in the whole range of nucleate boiling for water by laser interferometry

AU - Chen, Zhihao

AU - Hu, Xiaocheng

AU - Hu, Kang

AU - Utaka, Yoshio

AU - Mori, Shoji

PY - 2020/1

Y1 - 2020/1

N2 - During nucleate boiling, a thin liquid film (microlayer) is formed beneath a boiling bubble when the bubble undergoes rapid growth/expansion. The linear distribution of the microlayer has been previously confirmed, and its crest shape has been observed in the isolated bubble region of nucleate boiling. However, the microlayer behavior in larger heat flux regions up to critical heat flux has not yet been elucidated. In this study, to further understand the microlayer structure in the whole heat flux range of nucleate boiling, microlayer configuration was measured using laser interferometry. Water was adopted as the test fluid, and it is confirmed that the microlayer can be observed over a whole range of nucleate boiling containing the critical heat flux point. It is also confirmed that the deformation of the microlayer from axisymmetric shape was caused by complicated, irregular bubble motions such as bubble coalescence, which was observed for relatively higher heat flux. The crest shape of the microlayer, which appears near the periphery of its maximum diameter under relatively smaller heat flux, was not observed at a relatively higher heat flux. Finally, it is confirmed that heat flux does not obviously influence the thickness distribution of the initial microlayer.

AB - During nucleate boiling, a thin liquid film (microlayer) is formed beneath a boiling bubble when the bubble undergoes rapid growth/expansion. The linear distribution of the microlayer has been previously confirmed, and its crest shape has been observed in the isolated bubble region of nucleate boiling. However, the microlayer behavior in larger heat flux regions up to critical heat flux has not yet been elucidated. In this study, to further understand the microlayer structure in the whole heat flux range of nucleate boiling, microlayer configuration was measured using laser interferometry. Water was adopted as the test fluid, and it is confirmed that the microlayer can be observed over a whole range of nucleate boiling containing the critical heat flux point. It is also confirmed that the deformation of the microlayer from axisymmetric shape was caused by complicated, irregular bubble motions such as bubble coalescence, which was observed for relatively higher heat flux. The crest shape of the microlayer, which appears near the periphery of its maximum diameter under relatively smaller heat flux, was not observed at a relatively higher heat flux. Finally, it is confirmed that heat flux does not obviously influence the thickness distribution of the initial microlayer.

UR - http://www.scopus.com/inward/record.url?scp=85073101241&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85073101241&partnerID=8YFLogxK

U2 - 10.1016/j.ijheatmasstransfer.2019.118856

DO - 10.1016/j.ijheatmasstransfer.2019.118856

M3 - Article

AN - SCOPUS:85073101241

VL - 146

JO - International Journal of Heat and Mass Transfer

JF - International Journal of Heat and Mass Transfer

SN - 0017-9310

M1 - 118856

ER -