Measuring marginal willingness to pay using conjoint analysis and developing benefit transfer functions in various Asian cities

Koji Tokimatsu, Masahiko Aicha, Kentaro Yoshida, Masahiro Nishio, Eiichi Endo, Masaji Sakagami, Kayo Murakami, Norihiro Itsubo

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

We need a consistent methodology to measure the co-benefits of climate change mitigation across Asian countries. This study chose a strategy of modifying the Japan-specific life-cycle impact assessment method based on endpoint modeling (LIME) for wider application across countries. LIME has two dimensions. First, it is an environmental science that links the cause-and-effect chain. Second, it is an environmental valuation that weighs four endpoint damages in monetary terms through a conjoint analysis that is derived from an Internet-based questionnaire survey. This article describes the modification of the methodology for application of the conjoint analysis to weigh environmental impacts. We approached the investigation as follows. First, we conducted Internet surveys to measure marginal willingness-to-pay (MWTP). We used a sample of 112 respondents in their 20 s to 40 s, divided equally between men and women, in 11 cities across China, India, and Southeast Asia. The results obtained showed clear statistical significance and were comparable across the cities. Second, we attempted to develop functions (called benefit transfer functions) to simplify the measured MWTP in order to apply it across different Asian countries. The functions were derived through a stepwise meta-analytic method, a type of multiple regression analysis whose independent variable was MWTP and dependent variables were attributes of both respondents and surveyed cities. The functions showed that coal consumption and percentage of nature reserve were dependent variables. Then, the MWTPs estimated from the functions were compared with the measured MWTP for transfer error, which is calculated by the absolute value of the difference between the estimated value and the measured value divided by the latter. The transfer error was below 50% in about 90% of the 44 results (a combination of four endpoints and 11 cities), implying that the developed functions were statistically significant.

Original languageEnglish
Pages (from-to)541-552
Number of pages12
JournalInternational Journal of Sustainable Development and World Ecology
Volume23
Issue number6
DOIs
Publication statusPublished - Nov 1 2016

Fingerprint

willingness to pay
transfer function
methodology
questionnaire survey
assessment method
nature reserve
valuation
multiple regression
regression analysis
environmental impact
life cycle
statistical significance
coal
online survey
Southeast Asia
damage
city
measuring
analysis
damages

All Science Journal Classification (ASJC) codes

  • Geography, Planning and Development
  • Management, Monitoring, Policy and Law

Cite this

Measuring marginal willingness to pay using conjoint analysis and developing benefit transfer functions in various Asian cities. / Tokimatsu, Koji; Aicha, Masahiko; Yoshida, Kentaro; Nishio, Masahiro; Endo, Eiichi; Sakagami, Masaji; Murakami, Kayo; Itsubo, Norihiro.

In: International Journal of Sustainable Development and World Ecology, Vol. 23, No. 6, 01.11.2016, p. 541-552.

Research output: Contribution to journalArticle

Tokimatsu, Koji ; Aicha, Masahiko ; Yoshida, Kentaro ; Nishio, Masahiro ; Endo, Eiichi ; Sakagami, Masaji ; Murakami, Kayo ; Itsubo, Norihiro. / Measuring marginal willingness to pay using conjoint analysis and developing benefit transfer functions in various Asian cities. In: International Journal of Sustainable Development and World Ecology. 2016 ; Vol. 23, No. 6. pp. 541-552.
@article{d918e3010c7c4a54a9c7c4e91f843760,
title = "Measuring marginal willingness to pay using conjoint analysis and developing benefit transfer functions in various Asian cities",
abstract = "We need a consistent methodology to measure the co-benefits of climate change mitigation across Asian countries. This study chose a strategy of modifying the Japan-specific life-cycle impact assessment method based on endpoint modeling (LIME) for wider application across countries. LIME has two dimensions. First, it is an environmental science that links the cause-and-effect chain. Second, it is an environmental valuation that weighs four endpoint damages in monetary terms through a conjoint analysis that is derived from an Internet-based questionnaire survey. This article describes the modification of the methodology for application of the conjoint analysis to weigh environmental impacts. We approached the investigation as follows. First, we conducted Internet surveys to measure marginal willingness-to-pay (MWTP). We used a sample of 112 respondents in their 20 s to 40 s, divided equally between men and women, in 11 cities across China, India, and Southeast Asia. The results obtained showed clear statistical significance and were comparable across the cities. Second, we attempted to develop functions (called benefit transfer functions) to simplify the measured MWTP in order to apply it across different Asian countries. The functions were derived through a stepwise meta-analytic method, a type of multiple regression analysis whose independent variable was MWTP and dependent variables were attributes of both respondents and surveyed cities. The functions showed that coal consumption and percentage of nature reserve were dependent variables. Then, the MWTPs estimated from the functions were compared with the measured MWTP for transfer error, which is calculated by the absolute value of the difference between the estimated value and the measured value divided by the latter. The transfer error was below 50{\%} in about 90{\%} of the 44 results (a combination of four endpoints and 11 cities), implying that the developed functions were statistically significant.",
author = "Koji Tokimatsu and Masahiko Aicha and Kentaro Yoshida and Masahiro Nishio and Eiichi Endo and Masaji Sakagami and Kayo Murakami and Norihiro Itsubo",
year = "2016",
month = "11",
day = "1",
doi = "10.1080/13504509.2016.1168326",
language = "English",
volume = "23",
pages = "541--552",
journal = "International Journal of Sustainable Development and World Ecology",
issn = "1350-4509",
publisher = "Taylor and Francis Ltd.",
number = "6",

}

TY - JOUR

T1 - Measuring marginal willingness to pay using conjoint analysis and developing benefit transfer functions in various Asian cities

AU - Tokimatsu, Koji

AU - Aicha, Masahiko

AU - Yoshida, Kentaro

AU - Nishio, Masahiro

AU - Endo, Eiichi

AU - Sakagami, Masaji

AU - Murakami, Kayo

AU - Itsubo, Norihiro

PY - 2016/11/1

Y1 - 2016/11/1

N2 - We need a consistent methodology to measure the co-benefits of climate change mitigation across Asian countries. This study chose a strategy of modifying the Japan-specific life-cycle impact assessment method based on endpoint modeling (LIME) for wider application across countries. LIME has two dimensions. First, it is an environmental science that links the cause-and-effect chain. Second, it is an environmental valuation that weighs four endpoint damages in monetary terms through a conjoint analysis that is derived from an Internet-based questionnaire survey. This article describes the modification of the methodology for application of the conjoint analysis to weigh environmental impacts. We approached the investigation as follows. First, we conducted Internet surveys to measure marginal willingness-to-pay (MWTP). We used a sample of 112 respondents in their 20 s to 40 s, divided equally between men and women, in 11 cities across China, India, and Southeast Asia. The results obtained showed clear statistical significance and were comparable across the cities. Second, we attempted to develop functions (called benefit transfer functions) to simplify the measured MWTP in order to apply it across different Asian countries. The functions were derived through a stepwise meta-analytic method, a type of multiple regression analysis whose independent variable was MWTP and dependent variables were attributes of both respondents and surveyed cities. The functions showed that coal consumption and percentage of nature reserve were dependent variables. Then, the MWTPs estimated from the functions were compared with the measured MWTP for transfer error, which is calculated by the absolute value of the difference between the estimated value and the measured value divided by the latter. The transfer error was below 50% in about 90% of the 44 results (a combination of four endpoints and 11 cities), implying that the developed functions were statistically significant.

AB - We need a consistent methodology to measure the co-benefits of climate change mitigation across Asian countries. This study chose a strategy of modifying the Japan-specific life-cycle impact assessment method based on endpoint modeling (LIME) for wider application across countries. LIME has two dimensions. First, it is an environmental science that links the cause-and-effect chain. Second, it is an environmental valuation that weighs four endpoint damages in monetary terms through a conjoint analysis that is derived from an Internet-based questionnaire survey. This article describes the modification of the methodology for application of the conjoint analysis to weigh environmental impacts. We approached the investigation as follows. First, we conducted Internet surveys to measure marginal willingness-to-pay (MWTP). We used a sample of 112 respondents in their 20 s to 40 s, divided equally between men and women, in 11 cities across China, India, and Southeast Asia. The results obtained showed clear statistical significance and were comparable across the cities. Second, we attempted to develop functions (called benefit transfer functions) to simplify the measured MWTP in order to apply it across different Asian countries. The functions were derived through a stepwise meta-analytic method, a type of multiple regression analysis whose independent variable was MWTP and dependent variables were attributes of both respondents and surveyed cities. The functions showed that coal consumption and percentage of nature reserve were dependent variables. Then, the MWTPs estimated from the functions were compared with the measured MWTP for transfer error, which is calculated by the absolute value of the difference between the estimated value and the measured value divided by the latter. The transfer error was below 50% in about 90% of the 44 results (a combination of four endpoints and 11 cities), implying that the developed functions were statistically significant.

UR - http://www.scopus.com/inward/record.url?scp=84963566190&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84963566190&partnerID=8YFLogxK

U2 - 10.1080/13504509.2016.1168326

DO - 10.1080/13504509.2016.1168326

M3 - Article

AN - SCOPUS:84963566190

VL - 23

SP - 541

EP - 552

JO - International Journal of Sustainable Development and World Ecology

JF - International Journal of Sustainable Development and World Ecology

SN - 1350-4509

IS - 6

ER -