Method of noise-canceling for an instrumentation using a strain-gage

Yuji Morimoto, Katsutoshi Mine, Masato Kitazaki, Yoshihiro Fukushima

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Under practical working conditions, signals from a strain gage are inaccurate because of noise. A noise canceling method is proposed for a strain gage used in a closed-loop electrohydraulic servo-controlled fatigue testing machine. The noise originating between the sensor and the analog switch is eliminated by using a single sensor and a rectangular voltage source which switches the polarity of the sensor signal. This method cancels not only the noise on the transmission line, but also the noise on the sensor.

Original languageEnglish
Title of host publicationSICE '90. Proceedings of the 29th SICE Annual Conference--Volume II
PublisherPubl by IEEE
Pages781-784
Number of pages4
Publication statusPublished - 1990
Externally publishedYes
EventProceedings of the 29th SICE Annual Conference - Tokyo, Jpn
Duration: Jul 24 1990Jul 26 1990

Other

OtherProceedings of the 29th SICE Annual Conference
CityTokyo, Jpn
Period7/24/907/26/90

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Morimoto, Y., Mine, K., Kitazaki, M., & Fukushima, Y. (1990). Method of noise-canceling for an instrumentation using a strain-gage. In SICE '90. Proceedings of the 29th SICE Annual Conference--Volume II (pp. 781-784). Publ by IEEE.