Micro-dispensing for three-dimensional direct fabrication of laser waveguides

Noboru Hirakawa, Hiroyuki Kubota, Hiroaki Yoshioka, Noriyasu Tarumi, Yoshio Kagebayashi, Yuji Oki

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Direct drawing of laser-waveguide with width of 20μm on unflat surface was demonstrated by using micro-dispensing technique. Highly viscous prepolymers form high aspect ratios such as 18μm width and 7μm height with one time dispensing.

Original languageEnglish
Title of host publication2013 18th OptoElectronics and Communications Conference Held Jointly with 2013 International Conference on Photonics in Switching, OECC/PS 2013
Publication statusPublished - Oct 28 2013
Event2013 18th OptoElectronics and Communications Conference Held Jointly with 2013 International Conference on Photonics in Switching, OECC/PS 2013 - Kyoto, Japan
Duration: Jun 30 2013Jul 4 2013

Publication series

Name2013 18th OptoElectronics and Communications Conference Held Jointly with 2013 International Conference on Photonics in Switching, OECC/PS 2013

Other

Other2013 18th OptoElectronics and Communications Conference Held Jointly with 2013 International Conference on Photonics in Switching, OECC/PS 2013
CountryJapan
CityKyoto
Period6/30/137/4/13

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Hardware and Architecture
  • Electrical and Electronic Engineering

Cite this

Hirakawa, N., Kubota, H., Yoshioka, H., Tarumi, N., Kagebayashi, Y., & Oki, Y. (2013). Micro-dispensing for three-dimensional direct fabrication of laser waveguides. In 2013 18th OptoElectronics and Communications Conference Held Jointly with 2013 International Conference on Photonics in Switching, OECC/PS 2013 [6597454] (2013 18th OptoElectronics and Communications Conference Held Jointly with 2013 International Conference on Photonics in Switching, OECC/PS 2013).