Microstructural evolution in a spray-cast aluminum alloy during equal-channel angular pressing

Nong Gao, Marco J. Starink, Minoru Furukawa, Zenji Horita, Cheng Xu, Terence G. Langdon

    Research output: Contribution to journalArticlepeer-review

    27 Citations (Scopus)

    Abstract

    A spray-cast Al-7034 alloy was processed by equal-channel angular pressing (ECAP) to a total of eight passes at 473 K and the pressed samples were examined using transmission electron microscopy, differential scanning calorimetry and electron back-scatter diffraction. It is shown that the grain size of the alloy is reduced to ∼0.3 μm by ECAP and the high pressures associated with ECAP lead to a fragmentation of the rod-like η-phase. The high temperature of ECAP also produces a precipitation of η-phase. There is an increase in the fraction of high-angle boundaries during the initial passes of ECAP but the fraction of low-angle boundaries remains high even after eight passes.

    Original languageEnglish
    Pages (from-to)303-307
    Number of pages5
    JournalMaterials Science and Engineering A
    Volume410-411
    DOIs
    Publication statusPublished - Nov 25 2005

    All Science Journal Classification (ASJC) codes

    • Materials Science(all)
    • Condensed Matter Physics
    • Mechanics of Materials
    • Mechanical Engineering

    Fingerprint

    Dive into the research topics of 'Microstructural evolution in a spray-cast aluminum alloy during equal-channel angular pressing'. Together they form a unique fingerprint.

    Cite this