Microstructurally-short fatigue crack in SiC whisker reinforced 6061 aluminum alloy composite

Hiroyuki Toda, Toshiro Kobayashi

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Short crack propagation behaviour of 6061 aluminum alloy with and without SiC whisker was investigated. Short fatigue cracks initiate and grow in a much lower ΔK range than the threshold stress intensity ranges, ΔKth, of long fatigue cracks in both materials. In addition, there exists a growth dip in the MMC, and it could be explained by measured abrupt awakening of crack closure which is mainly induced by asperity contact. Statistic scatter in the growth rates of microstructurally short crack is observed in both of the materials. The distribution of crack growth rates well follows a three parameter Weibull distribution function. The shape parameters of this distribution function which reflects the extent of scatter in the crack growth rates are initially small in both of the materials and they increase and close to the respective asymptotic lines with increasing crack length. The crack length range when the scatter converges is 110 to approximately 183 μm for the unreinforced alloy and 25 to approximately 40 μm for the composite. This is considered as upper bounds of microstructurally short cracks. The differences in crack length may be attributed to the respective crack growth mechanisms that crystallographic crack growths such as slip band cracking and intergranular cracking, which are generally observed in the unreinforced alloy, are suppressed in the MMC due to the existence of closely spaced reinforcement, and a microstucturally short crack mainly interacts with reinforcement itself and a packet of whiskers.

Original languageEnglish
Pages (from-to)337-345
Number of pages9
JournalNippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
Volume58
Issue number3
DOIs
Publication statusPublished - Jan 1 1994
Externally publishedYes

Fingerprint

aluminum alloys
Aluminum alloys
cracks
Crack propagation
short cracks
Cracks
composite materials
Composite materials
Distribution functions
Reinforcement
reinforcement
Crystal whiskers
Crack closure
Weibull distribution
distribution functions
crack closure
Fatigue cracks
edge dislocations
Statistics
crack propagation

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Mechanics of Materials
  • Metals and Alloys
  • Materials Chemistry

Cite this

Microstructurally-short fatigue crack in SiC whisker reinforced 6061 aluminum alloy composite. / Toda, Hiroyuki; Kobayashi, Toshiro.

In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, Vol. 58, No. 3, 01.01.1994, p. 337-345.

Research output: Contribution to journalArticle

@article{a462475271c84ed0bb0453e3632d1ab7,
title = "Microstructurally-short fatigue crack in SiC whisker reinforced 6061 aluminum alloy composite",
abstract = "Short crack propagation behaviour of 6061 aluminum alloy with and without SiC whisker was investigated. Short fatigue cracks initiate and grow in a much lower ΔK range than the threshold stress intensity ranges, ΔKth, of long fatigue cracks in both materials. In addition, there exists a growth dip in the MMC, and it could be explained by measured abrupt awakening of crack closure which is mainly induced by asperity contact. Statistic scatter in the growth rates of microstructurally short crack is observed in both of the materials. The distribution of crack growth rates well follows a three parameter Weibull distribution function. The shape parameters of this distribution function which reflects the extent of scatter in the crack growth rates are initially small in both of the materials and they increase and close to the respective asymptotic lines with increasing crack length. The crack length range when the scatter converges is 110 to approximately 183 μm for the unreinforced alloy and 25 to approximately 40 μm for the composite. This is considered as upper bounds of microstructurally short cracks. The differences in crack length may be attributed to the respective crack growth mechanisms that crystallographic crack growths such as slip band cracking and intergranular cracking, which are generally observed in the unreinforced alloy, are suppressed in the MMC due to the existence of closely spaced reinforcement, and a microstucturally short crack mainly interacts with reinforcement itself and a packet of whiskers.",
author = "Hiroyuki Toda and Toshiro Kobayashi",
year = "1994",
month = "1",
day = "1",
doi = "10.2320/jinstmet1952.58.3_337",
language = "English",
volume = "58",
pages = "337--345",
journal = "Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals",
issn = "0021-4876",
publisher = "公益社団法人 日本金属学会",
number = "3",

}

TY - JOUR

T1 - Microstructurally-short fatigue crack in SiC whisker reinforced 6061 aluminum alloy composite

AU - Toda, Hiroyuki

AU - Kobayashi, Toshiro

PY - 1994/1/1

Y1 - 1994/1/1

N2 - Short crack propagation behaviour of 6061 aluminum alloy with and without SiC whisker was investigated. Short fatigue cracks initiate and grow in a much lower ΔK range than the threshold stress intensity ranges, ΔKth, of long fatigue cracks in both materials. In addition, there exists a growth dip in the MMC, and it could be explained by measured abrupt awakening of crack closure which is mainly induced by asperity contact. Statistic scatter in the growth rates of microstructurally short crack is observed in both of the materials. The distribution of crack growth rates well follows a three parameter Weibull distribution function. The shape parameters of this distribution function which reflects the extent of scatter in the crack growth rates are initially small in both of the materials and they increase and close to the respective asymptotic lines with increasing crack length. The crack length range when the scatter converges is 110 to approximately 183 μm for the unreinforced alloy and 25 to approximately 40 μm for the composite. This is considered as upper bounds of microstructurally short cracks. The differences in crack length may be attributed to the respective crack growth mechanisms that crystallographic crack growths such as slip band cracking and intergranular cracking, which are generally observed in the unreinforced alloy, are suppressed in the MMC due to the existence of closely spaced reinforcement, and a microstucturally short crack mainly interacts with reinforcement itself and a packet of whiskers.

AB - Short crack propagation behaviour of 6061 aluminum alloy with and without SiC whisker was investigated. Short fatigue cracks initiate and grow in a much lower ΔK range than the threshold stress intensity ranges, ΔKth, of long fatigue cracks in both materials. In addition, there exists a growth dip in the MMC, and it could be explained by measured abrupt awakening of crack closure which is mainly induced by asperity contact. Statistic scatter in the growth rates of microstructurally short crack is observed in both of the materials. The distribution of crack growth rates well follows a three parameter Weibull distribution function. The shape parameters of this distribution function which reflects the extent of scatter in the crack growth rates are initially small in both of the materials and they increase and close to the respective asymptotic lines with increasing crack length. The crack length range when the scatter converges is 110 to approximately 183 μm for the unreinforced alloy and 25 to approximately 40 μm for the composite. This is considered as upper bounds of microstructurally short cracks. The differences in crack length may be attributed to the respective crack growth mechanisms that crystallographic crack growths such as slip band cracking and intergranular cracking, which are generally observed in the unreinforced alloy, are suppressed in the MMC due to the existence of closely spaced reinforcement, and a microstucturally short crack mainly interacts with reinforcement itself and a packet of whiskers.

UR - http://www.scopus.com/inward/record.url?scp=0028383842&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0028383842&partnerID=8YFLogxK

U2 - 10.2320/jinstmet1952.58.3_337

DO - 10.2320/jinstmet1952.58.3_337

M3 - Article

AN - SCOPUS:0028383842

VL - 58

SP - 337

EP - 345

JO - Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals

JF - Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals

SN - 0021-4876

IS - 3

ER -