Misalignment effect on a three-dimensional cruciform welded joint

Shuichi Yamatoki, Seitaro Arimatsu, Koji Gotoh

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

In the ship-hull design phase, the distance of a misalignment of a cruciform welded joint is enlarged, by up to 100 mm for example, until its effect is thought to be minimized. To control tolerance, we used a technique to estimate the coefficient of the misalignment effect: the ratio of the stress with misalignment to stress without misalignment. Current methods, created using the two-dimensional (2D) misalignment model and focusing on small misalignments, cannot be applied in the design phase. Misalignment models are needed, as there have been no studies of these joints and it is impractical to do finite element (FE) analysis in each case. We propose an estimation method of the coefficient of misalignment effect in three dimensions (3D). First, we created a new equation to estimate the coefficient in 2D. The equation accommodates larger misalignments. Second, we found the membrane component of a misaligned member stress is reduced as a 3D effect and the coefficient converges given a certain misalignment value. Third, a modified equation taking the effect into account indicates the coefficient in 3D.

Original languageEnglish
Title of host publicationASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2013
Volume2 A
DOIs
Publication statusPublished - 2013
EventASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2013 - Nantes, France
Duration: Jun 9 2013Jun 14 2013

Other

OtherASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2013
CountryFrance
CityNantes
Period6/9/136/14/13

Fingerprint

Welds
Ships
Membranes
Finite element method

All Science Journal Classification (ASJC) codes

  • Ocean Engineering
  • Mechanical Engineering
  • Energy Engineering and Power Technology

Cite this

Yamatoki, S., Arimatsu, S., & Gotoh, K. (2013). Misalignment effect on a three-dimensional cruciform welded joint. In ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2013 (Vol. 2 A). [V02AT02A051] https://doi.org/10.1115/OMAE2013-10619

Misalignment effect on a three-dimensional cruciform welded joint. / Yamatoki, Shuichi; Arimatsu, Seitaro; Gotoh, Koji.

ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2013. Vol. 2 A 2013. V02AT02A051.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Yamatoki, S, Arimatsu, S & Gotoh, K 2013, Misalignment effect on a three-dimensional cruciform welded joint. in ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2013. vol. 2 A, V02AT02A051, ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2013, Nantes, France, 6/9/13. https://doi.org/10.1115/OMAE2013-10619
Yamatoki S, Arimatsu S, Gotoh K. Misalignment effect on a three-dimensional cruciform welded joint. In ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2013. Vol. 2 A. 2013. V02AT02A051 https://doi.org/10.1115/OMAE2013-10619
Yamatoki, Shuichi ; Arimatsu, Seitaro ; Gotoh, Koji. / Misalignment effect on a three-dimensional cruciform welded joint. ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2013. Vol. 2 A 2013.
@inproceedings{c698fc358f9d410397308655e63436cd,
title = "Misalignment effect on a three-dimensional cruciform welded joint",
abstract = "In the ship-hull design phase, the distance of a misalignment of a cruciform welded joint is enlarged, by up to 100 mm for example, until its effect is thought to be minimized. To control tolerance, we used a technique to estimate the coefficient of the misalignment effect: the ratio of the stress with misalignment to stress without misalignment. Current methods, created using the two-dimensional (2D) misalignment model and focusing on small misalignments, cannot be applied in the design phase. Misalignment models are needed, as there have been no studies of these joints and it is impractical to do finite element (FE) analysis in each case. We propose an estimation method of the coefficient of misalignment effect in three dimensions (3D). First, we created a new equation to estimate the coefficient in 2D. The equation accommodates larger misalignments. Second, we found the membrane component of a misaligned member stress is reduced as a 3D effect and the coefficient converges given a certain misalignment value. Third, a modified equation taking the effect into account indicates the coefficient in 3D.",
author = "Shuichi Yamatoki and Seitaro Arimatsu and Koji Gotoh",
year = "2013",
doi = "10.1115/OMAE2013-10619",
language = "English",
isbn = "9780791855324",
volume = "2 A",
booktitle = "ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2013",

}

TY - GEN

T1 - Misalignment effect on a three-dimensional cruciform welded joint

AU - Yamatoki, Shuichi

AU - Arimatsu, Seitaro

AU - Gotoh, Koji

PY - 2013

Y1 - 2013

N2 - In the ship-hull design phase, the distance of a misalignment of a cruciform welded joint is enlarged, by up to 100 mm for example, until its effect is thought to be minimized. To control tolerance, we used a technique to estimate the coefficient of the misalignment effect: the ratio of the stress with misalignment to stress without misalignment. Current methods, created using the two-dimensional (2D) misalignment model and focusing on small misalignments, cannot be applied in the design phase. Misalignment models are needed, as there have been no studies of these joints and it is impractical to do finite element (FE) analysis in each case. We propose an estimation method of the coefficient of misalignment effect in three dimensions (3D). First, we created a new equation to estimate the coefficient in 2D. The equation accommodates larger misalignments. Second, we found the membrane component of a misaligned member stress is reduced as a 3D effect and the coefficient converges given a certain misalignment value. Third, a modified equation taking the effect into account indicates the coefficient in 3D.

AB - In the ship-hull design phase, the distance of a misalignment of a cruciform welded joint is enlarged, by up to 100 mm for example, until its effect is thought to be minimized. To control tolerance, we used a technique to estimate the coefficient of the misalignment effect: the ratio of the stress with misalignment to stress without misalignment. Current methods, created using the two-dimensional (2D) misalignment model and focusing on small misalignments, cannot be applied in the design phase. Misalignment models are needed, as there have been no studies of these joints and it is impractical to do finite element (FE) analysis in each case. We propose an estimation method of the coefficient of misalignment effect in three dimensions (3D). First, we created a new equation to estimate the coefficient in 2D. The equation accommodates larger misalignments. Second, we found the membrane component of a misaligned member stress is reduced as a 3D effect and the coefficient converges given a certain misalignment value. Third, a modified equation taking the effect into account indicates the coefficient in 3D.

UR - http://www.scopus.com/inward/record.url?scp=84893106574&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84893106574&partnerID=8YFLogxK

U2 - 10.1115/OMAE2013-10619

DO - 10.1115/OMAE2013-10619

M3 - Conference contribution

AN - SCOPUS:84893106574

SN - 9780791855324

VL - 2 A

BT - ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2013

ER -