Modification performance of Hypercoal as an additive on co-carbonization of coal

Li Fang Hao, Ping Feng, Wen Li Song, Wei Gang Lin, Seong-Ho Yoon, I. Mochida

Research output: Contribution to journalArticle

8 Citations (Scopus)

Abstract

Modification performance of Hypercoal (HPC) extracted from brown coal as an additive on the structure of carbonization products through co-carbonization with two different coals was examined. The dimension and texture changes of products were observed using polarization microscope and scanning electron microscope. The results show that the pore structure of carbonization products from caking coal is improved by adding additive with larger size, however smaller particles and more additive amount are favorable for weakly caking coal. As a good candidate of binding substance with high thermoplasticity, HPC particles were found to have a tendency to be well dispersed and further excellent adhesion between coal particles. Excessive expansion of product from caking coal can be inhibited in appropriate conditions. The number and diameter of pore are reduced and pore walls are thickened by adding HPC. Fluidity and fusibility of weakly caking coal are accelerated by the colloid in additive, which would lead to mechanical properties of products improved. Moreover, more factors affecting the product structure via single-carbonization and co-carbonization were taken into account, including moisture in coal and molding pressure of artifact. Special pore structure is formed in the products owing to moisture, and the influence of molding pressure on products is different with coal properties.

Original languageEnglish
Pages (from-to)1025-1030
Number of pages6
JournalRanliao Huaxue Xuebao/Journal of Fuel Chemistry and Technology
Volume40
Issue number9
Publication statusPublished - Jan 1 2012

Fingerprint

carbonization
Coal
Carbonization
coal
products
porosity
Compression molding
Pore structure
moisture
Moisture
fusibility
thermoplasticity
Fluidity
Lignite
Colloids
Microscopes
Electron microscopes
Adhesion
colloids
artifacts

All Science Journal Classification (ASJC) codes

  • Chemical Engineering(all)
  • Fuel Technology
  • Physical and Theoretical Chemistry

Cite this

Modification performance of Hypercoal as an additive on co-carbonization of coal. / Hao, Li Fang; Feng, Ping; Song, Wen Li; Lin, Wei Gang; Yoon, Seong-Ho; Mochida, I.

In: Ranliao Huaxue Xuebao/Journal of Fuel Chemistry and Technology, Vol. 40, No. 9, 01.01.2012, p. 1025-1030.

Research output: Contribution to journalArticle

Hao, Li Fang ; Feng, Ping ; Song, Wen Li ; Lin, Wei Gang ; Yoon, Seong-Ho ; Mochida, I. / Modification performance of Hypercoal as an additive on co-carbonization of coal. In: Ranliao Huaxue Xuebao/Journal of Fuel Chemistry and Technology. 2012 ; Vol. 40, No. 9. pp. 1025-1030.
@article{7886c1309f554cb681cb96ade7b7cd9b,
title = "Modification performance of Hypercoal as an additive on co-carbonization of coal",
abstract = "Modification performance of Hypercoal (HPC) extracted from brown coal as an additive on the structure of carbonization products through co-carbonization with two different coals was examined. The dimension and texture changes of products were observed using polarization microscope and scanning electron microscope. The results show that the pore structure of carbonization products from caking coal is improved by adding additive with larger size, however smaller particles and more additive amount are favorable for weakly caking coal. As a good candidate of binding substance with high thermoplasticity, HPC particles were found to have a tendency to be well dispersed and further excellent adhesion between coal particles. Excessive expansion of product from caking coal can be inhibited in appropriate conditions. The number and diameter of pore are reduced and pore walls are thickened by adding HPC. Fluidity and fusibility of weakly caking coal are accelerated by the colloid in additive, which would lead to mechanical properties of products improved. Moreover, more factors affecting the product structure via single-carbonization and co-carbonization were taken into account, including moisture in coal and molding pressure of artifact. Special pore structure is formed in the products owing to moisture, and the influence of molding pressure on products is different with coal properties.",
author = "Hao, {Li Fang} and Ping Feng and Song, {Wen Li} and Lin, {Wei Gang} and Seong-Ho Yoon and I. Mochida",
year = "2012",
month = "1",
day = "1",
language = "English",
volume = "40",
pages = "1025--1030",
journal = "Journal of Fuel Chemistry and Technology",
issn = "0253-2409",
publisher = "Science Press",
number = "9",

}

TY - JOUR

T1 - Modification performance of Hypercoal as an additive on co-carbonization of coal

AU - Hao, Li Fang

AU - Feng, Ping

AU - Song, Wen Li

AU - Lin, Wei Gang

AU - Yoon, Seong-Ho

AU - Mochida, I.

PY - 2012/1/1

Y1 - 2012/1/1

N2 - Modification performance of Hypercoal (HPC) extracted from brown coal as an additive on the structure of carbonization products through co-carbonization with two different coals was examined. The dimension and texture changes of products were observed using polarization microscope and scanning electron microscope. The results show that the pore structure of carbonization products from caking coal is improved by adding additive with larger size, however smaller particles and more additive amount are favorable for weakly caking coal. As a good candidate of binding substance with high thermoplasticity, HPC particles were found to have a tendency to be well dispersed and further excellent adhesion between coal particles. Excessive expansion of product from caking coal can be inhibited in appropriate conditions. The number and diameter of pore are reduced and pore walls are thickened by adding HPC. Fluidity and fusibility of weakly caking coal are accelerated by the colloid in additive, which would lead to mechanical properties of products improved. Moreover, more factors affecting the product structure via single-carbonization and co-carbonization were taken into account, including moisture in coal and molding pressure of artifact. Special pore structure is formed in the products owing to moisture, and the influence of molding pressure on products is different with coal properties.

AB - Modification performance of Hypercoal (HPC) extracted from brown coal as an additive on the structure of carbonization products through co-carbonization with two different coals was examined. The dimension and texture changes of products were observed using polarization microscope and scanning electron microscope. The results show that the pore structure of carbonization products from caking coal is improved by adding additive with larger size, however smaller particles and more additive amount are favorable for weakly caking coal. As a good candidate of binding substance with high thermoplasticity, HPC particles were found to have a tendency to be well dispersed and further excellent adhesion between coal particles. Excessive expansion of product from caking coal can be inhibited in appropriate conditions. The number and diameter of pore are reduced and pore walls are thickened by adding HPC. Fluidity and fusibility of weakly caking coal are accelerated by the colloid in additive, which would lead to mechanical properties of products improved. Moreover, more factors affecting the product structure via single-carbonization and co-carbonization were taken into account, including moisture in coal and molding pressure of artifact. Special pore structure is formed in the products owing to moisture, and the influence of molding pressure on products is different with coal properties.

UR - http://www.scopus.com/inward/record.url?scp=84868257328&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84868257328&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:84868257328

VL - 40

SP - 1025

EP - 1030

JO - Journal of Fuel Chemistry and Technology

JF - Journal of Fuel Chemistry and Technology

SN - 0253-2409

IS - 9

ER -