Nb3Sn dipole magnet by wind and react process

K. Ishibashi, M. Koizumi, K. Hosoyama, M. Kobayashi, T. Horigami

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

An attempt was made to fabricate a NbsSn dipole magnet by adopting “wind and react process” where non-reacted Nb3Sn conductors were heat-treated after wound into coils. The fabricated magnet showed a performance of 88% of its critical current. Detailed fabrication techniques and experiences obtained from this attempt are reported. The effect of bending of non-reacted Nb3Sn conductor on critical current is also described.

Original languageEnglish
Pages (from-to)428-431
Number of pages4
JournalIEEE Transactions on Magnetics
Volume17
Issue number1
DOIs
Publication statusPublished - Jan 1981

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Electrical and Electronic Engineering

Cite this

Ishibashi, K., Koizumi, M., Hosoyama, K., Kobayashi, M., & Horigami, T. (1981). Nb3Sn dipole magnet by wind and react process. IEEE Transactions on Magnetics, 17(1), 428-431. https://doi.org/10.1109/TMAG.1981.1061080