Nitric oxide removal by NH3 injection into pressurized fludized bed combustor

Yasuo Yoshii, Nobuyuki Hokari, Tetsuya Iwase, Yozo Korai

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)

Abstract

The gas-phase reaction NO-NH3-O2 was investigated in a tubular flow reactor at a pressure of 788 kPa and temperatures from 650 to 850°C. Injection of ammonia into a 2MWthPFBC combustor was also attempted, and it was found that 55% of NO was converted to N2 at 855°C with an NH3/NO molar ratio of 2 and residence time of 1.4 s. In the combustor, the nitric oxide concentration could be reduced to less than 70 ppm, and leakage of ammonia was kept below 5 ppm at the full load. During the load change operation in the combustor, nitric oxide was decreased as the load became higher when the ammonia injection was controlled by the prediction method.

Original languageEnglish
Pages (from-to)122-126
Number of pages5
Journalkagaku kogaku ronbunshu
Volume36
Issue number2
DOIs
Publication statusPublished - Apr 2010

All Science Journal Classification (ASJC) codes

  • Chemistry(all)
  • Chemical Engineering(all)

Fingerprint

Dive into the research topics of 'Nitric oxide removal by NH<sub>3</sub> injection into pressurized fludized bed combustor'. Together they form a unique fingerprint.

Cite this