Non-isothermal precipitation kinetics and its effect on hot working behaviors of an Al–Zn–Mg–Cu alloy

Fulin Jiang, Hui Zhang

    Research output: Contribution to journalArticlepeer-review

    10 Citations (Scopus)

    Abstract

    The precipitation kinetics and its effect on hot working behavior of an Al–Zn–Mg–Cu alloy were studied under non-isothermal conditions and over a wide range of temperatures. The characterization techniques employed included in situ electrical resistivity measurements, differential scanning calorimetry, hardness testing and microstructure examination by scanning and transmission electron microscopy. The results showed that the precipitation kinetics during non-isothermal treatments were highly dependent on the thermal paths. Slow cooling processes led to coarse and sparse particle distribution. When heating to high temperatures, very fine precipitates with high density and homogeneous distribution were present at low temperature. Such fine precipitates showed unstable characters and dissolved quickly at higher temperature. Quantification of precipitate evolution during non-isothermal processing was obtained from in situ electrical resistivity measurements. The effects of heating paths on dynamic and static flow behaviors were also demonstrated to be significant. The degree of initial supersaturation controlled the nucleation rates and led to strong effect on dynamic and static precipitation, and on the flow stress softening.

    Original languageEnglish
    Pages (from-to)2830-2843
    Number of pages14
    JournalJournal of Materials Science
    Volume53
    Issue number4
    DOIs
    Publication statusPublished - Feb 1 2018

    All Science Journal Classification (ASJC) codes

    • Materials Science(all)
    • Mechanics of Materials
    • Mechanical Engineering

    Fingerprint

    Dive into the research topics of 'Non-isothermal precipitation kinetics and its effect on hot working behaviors of an Al–Zn–Mg–Cu alloy'. Together they form a unique fingerprint.

    Cite this