Novel fast oxide ion conductor and application for the electrolyte of solid oxide fuel cell

Tatsumi Ishihara, Takaaki Shibayama, Shinji Ishikawa, Kei Hosoi, Hiroyasu Nishiguchi, Yusaku Takita

Research output: Contribution to journalArticle

23 Citations (Scopus)

Abstract

Effects of Co doping to Ga sites of a LaGaO3 based oxide on the oxide ion conductivity was investigated. Oxide ion conductivity increased by doping with Co and it was found that usage of a LaGaO3-based perovskite type oxide, doped with Sr for the A site and Co and Mg for the B site (La0.8Sr0.2Ga0.8Mg0.115 Co0.085O3 denoted as LSGMC), for the electrolyte of the fuel cell gave a notably large power density at an intermediate temperature of 873 K on a cell using H2 and O2 as fuel and oxidant, respectively. The power density increased as the thickness of the electrolyte was decreased. The maximum power density was attained at values of 1.4 and 0.5 W/cm2 at 1073 and 873 K, respectively, when 0.18 mm thick LSGMC was used for the electrolyte. Electrical conductivity in the LSGMC was also estimated using polarization methods. Electrical conductivity was also increased by doping with Co, resulting in an increased amount of chemically leaked oxygen. Consequently, the theoretical calculation demonstrated that the highest energy conversion efficiency would be achieved when the thickness of the LSGMC electrolyte was 100 μm.

Original languageEnglish
Pages (from-to)1329-1335
Number of pages7
JournalJournal of the European Ceramic Society
Volume24
Issue number6
DOIs
Publication statusPublished - Jan 1 2004
Externally publishedYes

Fingerprint

Solid oxide fuel cells (SOFC)
Oxides
Electrolytes
Ions
Doping (additives)
Oxidants
Energy conversion
Perovskite
Conversion efficiency
Fuel cells
Polarization
Oxygen
Temperature
Electric Conductivity

All Science Journal Classification (ASJC) codes

  • Ceramics and Composites
  • Materials Chemistry

Cite this

Novel fast oxide ion conductor and application for the electrolyte of solid oxide fuel cell. / Ishihara, Tatsumi; Shibayama, Takaaki; Ishikawa, Shinji; Hosoi, Kei; Nishiguchi, Hiroyasu; Takita, Yusaku.

In: Journal of the European Ceramic Society, Vol. 24, No. 6, 01.01.2004, p. 1329-1335.

Research output: Contribution to journalArticle

Ishihara, Tatsumi ; Shibayama, Takaaki ; Ishikawa, Shinji ; Hosoi, Kei ; Nishiguchi, Hiroyasu ; Takita, Yusaku. / Novel fast oxide ion conductor and application for the electrolyte of solid oxide fuel cell. In: Journal of the European Ceramic Society. 2004 ; Vol. 24, No. 6. pp. 1329-1335.
@article{50eec402d3a7457981cfd41d3f06ae97,
title = "Novel fast oxide ion conductor and application for the electrolyte of solid oxide fuel cell",
abstract = "Effects of Co doping to Ga sites of a LaGaO3 based oxide on the oxide ion conductivity was investigated. Oxide ion conductivity increased by doping with Co and it was found that usage of a LaGaO3-based perovskite type oxide, doped with Sr for the A site and Co and Mg for the B site (La0.8Sr0.2Ga0.8Mg0.115 Co0.085O3 denoted as LSGMC), for the electrolyte of the fuel cell gave a notably large power density at an intermediate temperature of 873 K on a cell using H2 and O2 as fuel and oxidant, respectively. The power density increased as the thickness of the electrolyte was decreased. The maximum power density was attained at values of 1.4 and 0.5 W/cm2 at 1073 and 873 K, respectively, when 0.18 mm thick LSGMC was used for the electrolyte. Electrical conductivity in the LSGMC was also estimated using polarization methods. Electrical conductivity was also increased by doping with Co, resulting in an increased amount of chemically leaked oxygen. Consequently, the theoretical calculation demonstrated that the highest energy conversion efficiency would be achieved when the thickness of the LSGMC electrolyte was 100 μm.",
author = "Tatsumi Ishihara and Takaaki Shibayama and Shinji Ishikawa and Kei Hosoi and Hiroyasu Nishiguchi and Yusaku Takita",
year = "2004",
month = "1",
day = "1",
doi = "10.1016/S0955-2219(03)00508-9",
language = "English",
volume = "24",
pages = "1329--1335",
journal = "Journal of the European Ceramic Society",
issn = "0955-2219",
publisher = "Elsevier BV",
number = "6",

}

TY - JOUR

T1 - Novel fast oxide ion conductor and application for the electrolyte of solid oxide fuel cell

AU - Ishihara, Tatsumi

AU - Shibayama, Takaaki

AU - Ishikawa, Shinji

AU - Hosoi, Kei

AU - Nishiguchi, Hiroyasu

AU - Takita, Yusaku

PY - 2004/1/1

Y1 - 2004/1/1

N2 - Effects of Co doping to Ga sites of a LaGaO3 based oxide on the oxide ion conductivity was investigated. Oxide ion conductivity increased by doping with Co and it was found that usage of a LaGaO3-based perovskite type oxide, doped with Sr for the A site and Co and Mg for the B site (La0.8Sr0.2Ga0.8Mg0.115 Co0.085O3 denoted as LSGMC), for the electrolyte of the fuel cell gave a notably large power density at an intermediate temperature of 873 K on a cell using H2 and O2 as fuel and oxidant, respectively. The power density increased as the thickness of the electrolyte was decreased. The maximum power density was attained at values of 1.4 and 0.5 W/cm2 at 1073 and 873 K, respectively, when 0.18 mm thick LSGMC was used for the electrolyte. Electrical conductivity in the LSGMC was also estimated using polarization methods. Electrical conductivity was also increased by doping with Co, resulting in an increased amount of chemically leaked oxygen. Consequently, the theoretical calculation demonstrated that the highest energy conversion efficiency would be achieved when the thickness of the LSGMC electrolyte was 100 μm.

AB - Effects of Co doping to Ga sites of a LaGaO3 based oxide on the oxide ion conductivity was investigated. Oxide ion conductivity increased by doping with Co and it was found that usage of a LaGaO3-based perovskite type oxide, doped with Sr for the A site and Co and Mg for the B site (La0.8Sr0.2Ga0.8Mg0.115 Co0.085O3 denoted as LSGMC), for the electrolyte of the fuel cell gave a notably large power density at an intermediate temperature of 873 K on a cell using H2 and O2 as fuel and oxidant, respectively. The power density increased as the thickness of the electrolyte was decreased. The maximum power density was attained at values of 1.4 and 0.5 W/cm2 at 1073 and 873 K, respectively, when 0.18 mm thick LSGMC was used for the electrolyte. Electrical conductivity in the LSGMC was also estimated using polarization methods. Electrical conductivity was also increased by doping with Co, resulting in an increased amount of chemically leaked oxygen. Consequently, the theoretical calculation demonstrated that the highest energy conversion efficiency would be achieved when the thickness of the LSGMC electrolyte was 100 μm.

UR - http://www.scopus.com/inward/record.url?scp=0942299906&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0942299906&partnerID=8YFLogxK

U2 - 10.1016/S0955-2219(03)00508-9

DO - 10.1016/S0955-2219(03)00508-9

M3 - Article

AN - SCOPUS:0942299906

VL - 24

SP - 1329

EP - 1335

JO - Journal of the European Ceramic Society

JF - Journal of the European Ceramic Society

SN - 0955-2219

IS - 6

ER -