Numerical analysis of compressive performance for the Korean traditional joints

Gwang Chul Kim, Junji Matsumura

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

A full three-dimensional finite element model was created using continuum solid elements in ANSYS to gain more insight into the mechanical behavior of the Korean traditional joints. Orthotropic properties were characterized and non-linear analysis was also conducted for the reflection of wood property. For the joint character, not simple joint analysis but specially contact-target analysis was considered to reflect the situation between mortise and tenon. The numerical value is similar to the average value of actual compressive strength tests. Also, the types of stress concentration on the joint were similar to actual failure types. Therefore, we could verify the validity of finite element model that we have developed on the traditional joints. So, the numerical analysis model developed from this study may be utilized for the analysis and design of the various traditional joints.

Original languageEnglish
Pages (from-to)359-364
Number of pages6
JournalJournal of the Faculty of Agriculture, Kyushu University
Volume58
Issue number2
Publication statusPublished - Sep 1 2013

Fingerprint

joints (wood)
Joints
wood properties
Compressive Strength
testing

All Science Journal Classification (ASJC) codes

  • Biotechnology
  • Agronomy and Crop Science

Cite this

Numerical analysis of compressive performance for the Korean traditional joints. / Kim, Gwang Chul; Matsumura, Junji.

In: Journal of the Faculty of Agriculture, Kyushu University, Vol. 58, No. 2, 01.09.2013, p. 359-364.

Research output: Contribution to journalArticle

@article{ee2f8c8eb9394f528e24ca21f0d046d7,
title = "Numerical analysis of compressive performance for the Korean traditional joints",
abstract = "A full three-dimensional finite element model was created using continuum solid elements in ANSYS to gain more insight into the mechanical behavior of the Korean traditional joints. Orthotropic properties were characterized and non-linear analysis was also conducted for the reflection of wood property. For the joint character, not simple joint analysis but specially contact-target analysis was considered to reflect the situation between mortise and tenon. The numerical value is similar to the average value of actual compressive strength tests. Also, the types of stress concentration on the joint were similar to actual failure types. Therefore, we could verify the validity of finite element model that we have developed on the traditional joints. So, the numerical analysis model developed from this study may be utilized for the analysis and design of the various traditional joints.",
author = "Kim, {Gwang Chul} and Junji Matsumura",
year = "2013",
month = "9",
day = "1",
language = "English",
volume = "58",
pages = "359--364",
journal = "Journal of the Faculty of Agriculture, Kyushu University",
issn = "0023-6152",
publisher = "Faculty of Agriculture, Kyushu University",
number = "2",

}

TY - JOUR

T1 - Numerical analysis of compressive performance for the Korean traditional joints

AU - Kim, Gwang Chul

AU - Matsumura, Junji

PY - 2013/9/1

Y1 - 2013/9/1

N2 - A full three-dimensional finite element model was created using continuum solid elements in ANSYS to gain more insight into the mechanical behavior of the Korean traditional joints. Orthotropic properties were characterized and non-linear analysis was also conducted for the reflection of wood property. For the joint character, not simple joint analysis but specially contact-target analysis was considered to reflect the situation between mortise and tenon. The numerical value is similar to the average value of actual compressive strength tests. Also, the types of stress concentration on the joint were similar to actual failure types. Therefore, we could verify the validity of finite element model that we have developed on the traditional joints. So, the numerical analysis model developed from this study may be utilized for the analysis and design of the various traditional joints.

AB - A full three-dimensional finite element model was created using continuum solid elements in ANSYS to gain more insight into the mechanical behavior of the Korean traditional joints. Orthotropic properties were characterized and non-linear analysis was also conducted for the reflection of wood property. For the joint character, not simple joint analysis but specially contact-target analysis was considered to reflect the situation between mortise and tenon. The numerical value is similar to the average value of actual compressive strength tests. Also, the types of stress concentration on the joint were similar to actual failure types. Therefore, we could verify the validity of finite element model that we have developed on the traditional joints. So, the numerical analysis model developed from this study may be utilized for the analysis and design of the various traditional joints.

UR - http://www.scopus.com/inward/record.url?scp=84885726236&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84885726236&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:84885726236

VL - 58

SP - 359

EP - 364

JO - Journal of the Faculty of Agriculture, Kyushu University

JF - Journal of the Faculty of Agriculture, Kyushu University

SN - 0023-6152

IS - 2

ER -