On-line Control of Feed-Speed in Routing

Chiaki Tanaka, Grzegorz Cyra, Tetsuya Nakao, Masahiro Yoshinobu, Hiroyuki Katayama

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

An automatic workpiece feed-rate control system has been developed to produce a desired surface roughness in routing in this study. A sensing techique of acoustic emission (AE) signals was applied to monitor the machining process continuously. For the sensing of AE signals, a non-contact technique using a microphone was tried in place of the contact technique with a transducer generally-used. Adaptive control takes place in the system developed for routing by using the linear regressions of the AE count rate on the workpiece feed-rate and the regressions of surface roughnesses on the workpiece feed-rate. The desired surface roughness is produced by the automatic control of the workpiece feed-rate, using AE signals, as the sensing technique.

Original languageEnglish
Pages (from-to)544-550
Number of pages7
JournalMokuzai Gakkaishi/Journal of the Japan Wood Research Society
Volume43
Issue number7
Publication statusPublished - Dec 1 1997
Externally publishedYes

    Fingerprint

All Science Journal Classification (ASJC) codes

  • Chemical Engineering(all)

Cite this

Tanaka, C., Cyra, G., Nakao, T., Yoshinobu, M., & Katayama, H. (1997). On-line Control of Feed-Speed in Routing. Mokuzai Gakkaishi/Journal of the Japan Wood Research Society, 43(7), 544-550.