Optimization of microstructure and mechanical properties of Co-Cr-Mo alloys by high-pressure torsion and subsequent short annealing

Murat Isik, Mitsuo Niinomi, Huihong Liu, Ken Cho, Masaaki Nakai, Zenji Horita, Takayuki Narushima, Kyosuke Ueda

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

The main target of this study is to optimize the microstructure and to achieve an optimization for the mechanical properties in a biomedical Co-Cr-Mo (CCM) alloy with the nominal composition of Co-28Cr-6Mo (mass%) subjected to high-pressure torsion (HPT) and subsequent short annealing. The γ → ε phase transformation and grain refinement occur in the CCM alloy subjected to HPT processing at an equivalent strain (εeq) of 2.25 (CCMHPT). The HPT processing causes a decrease in the elongation due to the formation of an excessive amount of ε phase. For removal of the excessive amount of ε phases, the CCMHPT was subjected to a short annealing (CCMHPTA). The effect of the short annealing temperature (1073 K, 1273 K, and 1473 K; annealing time was fixed at 0.3 ks) on CCMHPT was investigated. In addition, the effect of the length of duration for the short annealing (0.06 ks, 0.3 ks, and 0.6 ks;) for a fixed annealing temperature of 1273 K on CCMHPT was studied. CCMHPTA(1273 K) annealed for 0.3 ks shows a good optimization of mechanical properties that include high strength and large elongation owing to its ultrafine-grained microstructure, and removal of excessive ε phases.

Original languageEnglish
Pages (from-to)1887-1896
Number of pages10
JournalMaterials Transactions
Volume57
Issue number11
DOIs
Publication statusPublished - Jan 1 2016

Fingerprint

Torsional stress
torsion
mechanical properties
Annealing
Mechanical properties
microstructure
Microstructure
optimization
annealing
elongation
Elongation
Grain refinement
Processing
high strength
phase transformations
Phase transitions
Temperature
temperature
causes
Chemical analysis

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Optimization of microstructure and mechanical properties of Co-Cr-Mo alloys by high-pressure torsion and subsequent short annealing. / Isik, Murat; Niinomi, Mitsuo; Liu, Huihong; Cho, Ken; Nakai, Masaaki; Horita, Zenji; Narushima, Takayuki; Ueda, Kyosuke.

In: Materials Transactions, Vol. 57, No. 11, 01.01.2016, p. 1887-1896.

Research output: Contribution to journalArticle

Isik, Murat ; Niinomi, Mitsuo ; Liu, Huihong ; Cho, Ken ; Nakai, Masaaki ; Horita, Zenji ; Narushima, Takayuki ; Ueda, Kyosuke. / Optimization of microstructure and mechanical properties of Co-Cr-Mo alloys by high-pressure torsion and subsequent short annealing. In: Materials Transactions. 2016 ; Vol. 57, No. 11. pp. 1887-1896.
@article{8402b4b07d1e42b79d0b760a87e124e9,
title = "Optimization of microstructure and mechanical properties of Co-Cr-Mo alloys by high-pressure torsion and subsequent short annealing",
abstract = "The main target of this study is to optimize the microstructure and to achieve an optimization for the mechanical properties in a biomedical Co-Cr-Mo (CCM) alloy with the nominal composition of Co-28Cr-6Mo (mass{\%}) subjected to high-pressure torsion (HPT) and subsequent short annealing. The γ → ε phase transformation and grain refinement occur in the CCM alloy subjected to HPT processing at an equivalent strain (εeq) of 2.25 (CCMHPT). The HPT processing causes a decrease in the elongation due to the formation of an excessive amount of ε phase. For removal of the excessive amount of ε phases, the CCMHPT was subjected to a short annealing (CCMHPTA). The effect of the short annealing temperature (1073 K, 1273 K, and 1473 K; annealing time was fixed at 0.3 ks) on CCMHPT was investigated. In addition, the effect of the length of duration for the short annealing (0.06 ks, 0.3 ks, and 0.6 ks;) for a fixed annealing temperature of 1273 K on CCMHPT was studied. CCMHPTA(1273 K) annealed for 0.3 ks shows a good optimization of mechanical properties that include high strength and large elongation owing to its ultrafine-grained microstructure, and removal of excessive ε phases.",
author = "Murat Isik and Mitsuo Niinomi and Huihong Liu and Ken Cho and Masaaki Nakai and Zenji Horita and Takayuki Narushima and Kyosuke Ueda",
year = "2016",
month = "1",
day = "1",
doi = "10.2320/matertrans.M2016112",
language = "English",
volume = "57",
pages = "1887--1896",
journal = "Materials Transactions",
issn = "0916-1821",
publisher = "The Japan Institute of Metals and Materials",
number = "11",

}

TY - JOUR

T1 - Optimization of microstructure and mechanical properties of Co-Cr-Mo alloys by high-pressure torsion and subsequent short annealing

AU - Isik, Murat

AU - Niinomi, Mitsuo

AU - Liu, Huihong

AU - Cho, Ken

AU - Nakai, Masaaki

AU - Horita, Zenji

AU - Narushima, Takayuki

AU - Ueda, Kyosuke

PY - 2016/1/1

Y1 - 2016/1/1

N2 - The main target of this study is to optimize the microstructure and to achieve an optimization for the mechanical properties in a biomedical Co-Cr-Mo (CCM) alloy with the nominal composition of Co-28Cr-6Mo (mass%) subjected to high-pressure torsion (HPT) and subsequent short annealing. The γ → ε phase transformation and grain refinement occur in the CCM alloy subjected to HPT processing at an equivalent strain (εeq) of 2.25 (CCMHPT). The HPT processing causes a decrease in the elongation due to the formation of an excessive amount of ε phase. For removal of the excessive amount of ε phases, the CCMHPT was subjected to a short annealing (CCMHPTA). The effect of the short annealing temperature (1073 K, 1273 K, and 1473 K; annealing time was fixed at 0.3 ks) on CCMHPT was investigated. In addition, the effect of the length of duration for the short annealing (0.06 ks, 0.3 ks, and 0.6 ks;) for a fixed annealing temperature of 1273 K on CCMHPT was studied. CCMHPTA(1273 K) annealed for 0.3 ks shows a good optimization of mechanical properties that include high strength and large elongation owing to its ultrafine-grained microstructure, and removal of excessive ε phases.

AB - The main target of this study is to optimize the microstructure and to achieve an optimization for the mechanical properties in a biomedical Co-Cr-Mo (CCM) alloy with the nominal composition of Co-28Cr-6Mo (mass%) subjected to high-pressure torsion (HPT) and subsequent short annealing. The γ → ε phase transformation and grain refinement occur in the CCM alloy subjected to HPT processing at an equivalent strain (εeq) of 2.25 (CCMHPT). The HPT processing causes a decrease in the elongation due to the formation of an excessive amount of ε phase. For removal of the excessive amount of ε phases, the CCMHPT was subjected to a short annealing (CCMHPTA). The effect of the short annealing temperature (1073 K, 1273 K, and 1473 K; annealing time was fixed at 0.3 ks) on CCMHPT was investigated. In addition, the effect of the length of duration for the short annealing (0.06 ks, 0.3 ks, and 0.6 ks;) for a fixed annealing temperature of 1273 K on CCMHPT was studied. CCMHPTA(1273 K) annealed for 0.3 ks shows a good optimization of mechanical properties that include high strength and large elongation owing to its ultrafine-grained microstructure, and removal of excessive ε phases.

UR - http://www.scopus.com/inward/record.url?scp=84992482360&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84992482360&partnerID=8YFLogxK

U2 - 10.2320/matertrans.M2016112

DO - 10.2320/matertrans.M2016112

M3 - Article

AN - SCOPUS:84992482360

VL - 57

SP - 1887

EP - 1896

JO - Materials Transactions

JF - Materials Transactions

SN - 0916-1821

IS - 11

ER -