Origin of fine ferrite grain structure of sheet steel hot-rolled in ferrite region without lubrication

Saiji Matsuoka, Kei Sakata, Osamu Furukimi, Takashi Obara

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

The structural variation in the thickness direction of ultra-low C sheet steel rolled in the ferrite region without lubrication is analyzed with EBSD technique as well as conventional measuring method. (1) A nonuniform microstructure through the thickness is formed due to the additional shear strain introduced by frictional force between the rolls and the material, and the fine grains with the size of 1.0 to 1.5 microns are observed near the surface where the shear strain is maximum. Since the dislocation density of these grains is relatively low and these grains are surrounded by high-angle boundaries having a misorientation angle over 15°, these grains might be recrystallized ones. (2) The microstructure observed in the etched steel with SEM are changed continuously from the deformed grains to the subgrains and the recrystallized grains with increasing shear strain. On the other hand, the size of the subgrains consisting of substructure is 0.5 to 1.0 microns by means of EBSD, and it is independent of shear strain. (3) The misorientation angle between the adjacent subgrains is increased with increasing shear strain, and high-angle boundaries are formed near the surface. (4) These experimental results suggest that the fine recrystallized grains might have formed in such a way that the subgrains are rotated continuously and the misorientation angle between the adjacent subgrains is increased over 15° with increasing shear strain, and the rearrangement of dislocations occurs during and/or after rolling, resulting in the formation of recrystallized grains.

Original languageEnglish
Pages (from-to)471-478
Number of pages8
JournalTetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
Volume85
Issue number6
DOIs
Publication statusPublished - Jan 1 1999

Fingerprint

Crystal microstructure
Shear strain
Steel sheet
lubrication
Lubrication
Ferrite
shear strain
ferrites
steels
misalignment
Microstructure
Steel
microstructure
substructures
Scanning electron microscopy
scanning electron microscopy

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Physical and Theoretical Chemistry
  • Metals and Alloys
  • Materials Chemistry

Cite this

Origin of fine ferrite grain structure of sheet steel hot-rolled in ferrite region without lubrication. / Matsuoka, Saiji; Sakata, Kei; Furukimi, Osamu; Obara, Takashi.

In: Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, Vol. 85, No. 6, 01.01.1999, p. 471-478.

Research output: Contribution to journalArticle

Matsuoka, Saiji ; Sakata, Kei ; Furukimi, Osamu ; Obara, Takashi. / Origin of fine ferrite grain structure of sheet steel hot-rolled in ferrite region without lubrication. In: Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 1999 ; Vol. 85, No. 6. pp. 471-478.
@article{97e0241e4fb24171872bab9026872532,
title = "Origin of fine ferrite grain structure of sheet steel hot-rolled in ferrite region without lubrication",
abstract = "The structural variation in the thickness direction of ultra-low C sheet steel rolled in the ferrite region without lubrication is analyzed with EBSD technique as well as conventional measuring method. (1) A nonuniform microstructure through the thickness is formed due to the additional shear strain introduced by frictional force between the rolls and the material, and the fine grains with the size of 1.0 to 1.5 microns are observed near the surface where the shear strain is maximum. Since the dislocation density of these grains is relatively low and these grains are surrounded by high-angle boundaries having a misorientation angle over 15°, these grains might be recrystallized ones. (2) The microstructure observed in the etched steel with SEM are changed continuously from the deformed grains to the subgrains and the recrystallized grains with increasing shear strain. On the other hand, the size of the subgrains consisting of substructure is 0.5 to 1.0 microns by means of EBSD, and it is independent of shear strain. (3) The misorientation angle between the adjacent subgrains is increased with increasing shear strain, and high-angle boundaries are formed near the surface. (4) These experimental results suggest that the fine recrystallized grains might have formed in such a way that the subgrains are rotated continuously and the misorientation angle between the adjacent subgrains is increased over 15° with increasing shear strain, and the rearrangement of dislocations occurs during and/or after rolling, resulting in the formation of recrystallized grains.",
author = "Saiji Matsuoka and Kei Sakata and Osamu Furukimi and Takashi Obara",
year = "1999",
month = "1",
day = "1",
doi = "10.2355/tetsutohagane1955.85.6_471",
language = "English",
volume = "85",
pages = "471--478",
journal = "Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan",
issn = "0021-1575",
publisher = "一般社団法人 日本鉄鋼協会",
number = "6",

}

TY - JOUR

T1 - Origin of fine ferrite grain structure of sheet steel hot-rolled in ferrite region without lubrication

AU - Matsuoka, Saiji

AU - Sakata, Kei

AU - Furukimi, Osamu

AU - Obara, Takashi

PY - 1999/1/1

Y1 - 1999/1/1

N2 - The structural variation in the thickness direction of ultra-low C sheet steel rolled in the ferrite region without lubrication is analyzed with EBSD technique as well as conventional measuring method. (1) A nonuniform microstructure through the thickness is formed due to the additional shear strain introduced by frictional force between the rolls and the material, and the fine grains with the size of 1.0 to 1.5 microns are observed near the surface where the shear strain is maximum. Since the dislocation density of these grains is relatively low and these grains are surrounded by high-angle boundaries having a misorientation angle over 15°, these grains might be recrystallized ones. (2) The microstructure observed in the etched steel with SEM are changed continuously from the deformed grains to the subgrains and the recrystallized grains with increasing shear strain. On the other hand, the size of the subgrains consisting of substructure is 0.5 to 1.0 microns by means of EBSD, and it is independent of shear strain. (3) The misorientation angle between the adjacent subgrains is increased with increasing shear strain, and high-angle boundaries are formed near the surface. (4) These experimental results suggest that the fine recrystallized grains might have formed in such a way that the subgrains are rotated continuously and the misorientation angle between the adjacent subgrains is increased over 15° with increasing shear strain, and the rearrangement of dislocations occurs during and/or after rolling, resulting in the formation of recrystallized grains.

AB - The structural variation in the thickness direction of ultra-low C sheet steel rolled in the ferrite region without lubrication is analyzed with EBSD technique as well as conventional measuring method. (1) A nonuniform microstructure through the thickness is formed due to the additional shear strain introduced by frictional force between the rolls and the material, and the fine grains with the size of 1.0 to 1.5 microns are observed near the surface where the shear strain is maximum. Since the dislocation density of these grains is relatively low and these grains are surrounded by high-angle boundaries having a misorientation angle over 15°, these grains might be recrystallized ones. (2) The microstructure observed in the etched steel with SEM are changed continuously from the deformed grains to the subgrains and the recrystallized grains with increasing shear strain. On the other hand, the size of the subgrains consisting of substructure is 0.5 to 1.0 microns by means of EBSD, and it is independent of shear strain. (3) The misorientation angle between the adjacent subgrains is increased with increasing shear strain, and high-angle boundaries are formed near the surface. (4) These experimental results suggest that the fine recrystallized grains might have formed in such a way that the subgrains are rotated continuously and the misorientation angle between the adjacent subgrains is increased over 15° with increasing shear strain, and the rearrangement of dislocations occurs during and/or after rolling, resulting in the formation of recrystallized grains.

UR - http://www.scopus.com/inward/record.url?scp=0032644965&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0032644965&partnerID=8YFLogxK

U2 - 10.2355/tetsutohagane1955.85.6_471

DO - 10.2355/tetsutohagane1955.85.6_471

M3 - Article

AN - SCOPUS:0032644965

VL - 85

SP - 471

EP - 478

JO - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan

JF - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan

SN - 0021-1575

IS - 6

ER -