Outline of deposition model and sensitivity analysis

Kazuhide Ito, Jun Narikawa, Cong Li

Research output: Contribution to journalArticle

Abstract

The quality problem regarding the overall indoor environment is called IEQ (Indoor Environmental Quality) and this area has been attracting increasing attention with the increasing health consciousness of residents. In the wide spectrum of IEQ problems, this research focuses on indoor aerosol pollution issues that have a large influence on the health risk of indoor residents. The overarching objective of this study was to develop a numerical model based on Computational Fluid Dynamics to predict aerosol concentration distributions in indoor environments. Towards this end, this paper (part 1) proposes the wall surface deposition model of nano-scale aerosol that can predict unsteady deposition flux of aerosol in indoors and reports the results of sensitivity analyses for targeting plug-flow type chamber.

Original languageEnglish
Pages (from-to)973-979
Number of pages7
JournalJournal of Environmental Engineering
Volume76
Issue number669
DOIs
Publication statusPublished - Nov 1 2011

Fingerprint

Sensitivity analysis
Aerosols
Health risks
Numerical models
Computational fluid dynamics
Pollution
Health
Fluxes

All Science Journal Classification (ASJC) codes

  • Environmental Engineering

Cite this

Outline of deposition model and sensitivity analysis. / Ito, Kazuhide; Narikawa, Jun; Li, Cong.

In: Journal of Environmental Engineering, Vol. 76, No. 669, 01.11.2011, p. 973-979.

Research output: Contribution to journalArticle

Ito, Kazuhide ; Narikawa, Jun ; Li, Cong. / Outline of deposition model and sensitivity analysis. In: Journal of Environmental Engineering. 2011 ; Vol. 76, No. 669. pp. 973-979.
@article{e5c2c748008047c1980db4e3d0fb7549,
title = "Outline of deposition model and sensitivity analysis",
abstract = "The quality problem regarding the overall indoor environment is called IEQ (Indoor Environmental Quality) and this area has been attracting increasing attention with the increasing health consciousness of residents. In the wide spectrum of IEQ problems, this research focuses on indoor aerosol pollution issues that have a large influence on the health risk of indoor residents. The overarching objective of this study was to develop a numerical model based on Computational Fluid Dynamics to predict aerosol concentration distributions in indoor environments. Towards this end, this paper (part 1) proposes the wall surface deposition model of nano-scale aerosol that can predict unsteady deposition flux of aerosol in indoors and reports the results of sensitivity analyses for targeting plug-flow type chamber.",
author = "Kazuhide Ito and Jun Narikawa and Cong Li",
year = "2011",
month = "11",
day = "1",
doi = "10.3130/aije.76.973",
language = "English",
volume = "76",
pages = "973--979",
journal = "Journal of Environmental Engineering (Japan)",
issn = "1348-0685",
publisher = "Architectural Institute of Japan",
number = "669",

}

TY - JOUR

T1 - Outline of deposition model and sensitivity analysis

AU - Ito, Kazuhide

AU - Narikawa, Jun

AU - Li, Cong

PY - 2011/11/1

Y1 - 2011/11/1

N2 - The quality problem regarding the overall indoor environment is called IEQ (Indoor Environmental Quality) and this area has been attracting increasing attention with the increasing health consciousness of residents. In the wide spectrum of IEQ problems, this research focuses on indoor aerosol pollution issues that have a large influence on the health risk of indoor residents. The overarching objective of this study was to develop a numerical model based on Computational Fluid Dynamics to predict aerosol concentration distributions in indoor environments. Towards this end, this paper (part 1) proposes the wall surface deposition model of nano-scale aerosol that can predict unsteady deposition flux of aerosol in indoors and reports the results of sensitivity analyses for targeting plug-flow type chamber.

AB - The quality problem regarding the overall indoor environment is called IEQ (Indoor Environmental Quality) and this area has been attracting increasing attention with the increasing health consciousness of residents. In the wide spectrum of IEQ problems, this research focuses on indoor aerosol pollution issues that have a large influence on the health risk of indoor residents. The overarching objective of this study was to develop a numerical model based on Computational Fluid Dynamics to predict aerosol concentration distributions in indoor environments. Towards this end, this paper (part 1) proposes the wall surface deposition model of nano-scale aerosol that can predict unsteady deposition flux of aerosol in indoors and reports the results of sensitivity analyses for targeting plug-flow type chamber.

UR - http://www.scopus.com/inward/record.url?scp=84867185897&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84867185897&partnerID=8YFLogxK

U2 - 10.3130/aije.76.973

DO - 10.3130/aije.76.973

M3 - Article

AN - SCOPUS:84867185897

VL - 76

SP - 973

EP - 979

JO - Journal of Environmental Engineering (Japan)

JF - Journal of Environmental Engineering (Japan)

SN - 1348-0685

IS - 669

ER -