In this study, passive alignment and mounting of lithium niobate (LiNbO3) chips, with a large mismatch in the coefficient of thermal expansion with most semiconductors, are demonstrated for hybrid-integrated optical devices. LiNbO3 chips were aligned passively using the visual index alignment method and were subsequently bonded on the Si substrates by low-temperature solid-state bonding with Au microbumps, which allow for electrical connections and heat dissipation. Au-Au bonding was carried out at 100 °C in ambient air after surface activation by argon RF plasma. The vertical bonding accuracy was determined by assessing the height variations of the Au microbumps due to the plastic deformation in the bonding process. The bonding accuracies in the horizontal and vertical directions were estimated to be within ±1 μm. Average excess loss due to misalignment between titanium-diffused single-mode LiNbO3 waveguides and V-groove-guided single-mode fibers was about 0.5-dBm per interface (wavelength: 1.55 μm).
|Number of pages||7|
|Journal||IEEE Journal on Selected Topics in Quantum Electronics|
|Publication status||Published - May 2011|
All Science Journal Classification (ASJC) codes
- Atomic and Molecular Physics, and Optics
- Electrical and Electronic Engineering