Performance investigation of an advanced multi-effect adsorption desalination cycle

Thu Kyaw, Young Deuk Kim, Muhammad Wakil Shahzad, Jayaprakash Saththasivam, Kim Choon

Research output: Contribution to conferencePaper

1 Citation (Scopus)

Abstract

Energy recovery scheme using multi-effect evaporation is introduced to Adsorption Desalination (AD) cycles. In the proposed cycle, the condensation energy from the desorption process is recovered multiple times for the evaporation/condensation of the sea water hence it provides improved performance in terms of water production and the specific energy consumption. To demonstrate the advanced multi-effect AD cycle, mathematical model is developed using energy, material and concentration balances for each phase along with the isotherm and kinetics modeling of the sorption processes. Hydrophilic mesoporous silica gel with pore surface area of 800m2/g is selected as the adsorbent due to its excellent uptake of water vapor and low regeneration temperature. Condenser - evaporator heat exchanger with three intermediate effects is employed where the top brine temperature (TBT) and the bottom brine temperature (BBT) are about 35 °C and 7 °C, respectively. It is noted that contrary to the conventional multi-effect distillation (MED) cycle, most of the evaporating - condensing effects in the cycle operate at subatmospheric temperature i.e., less than 30 °C owing to the mass transport phenomena from the vapor uptake by the adsorbent. The performance of the AD cycle is investigated at various hot water inlet temperatures ranging from 65 °C to 85 °C since such kind of heat source is abundantly available from process waste heat or renewable energy. Feed water being evaporated at low temperature, thus, lower scaling and fouling potentials, the proposed AD cycle is a strong candidate for handling highly concentrated feed water (TDS > 100,000 ppm) such as produced water, brine rejected from other desalination plants and zero liquid discharge (ZLD) system.

Original languageEnglish
Publication statusPublished - Jan 1 2014
Event7th Asian Conference on Refrigeration and Air Conditioning, ACRA 2014 - Jeju Island, Korea, Republic of
Duration: May 18 2014May 21 2014

Other

Other7th Asian Conference on Refrigeration and Air Conditioning, ACRA 2014
CountryKorea, Republic of
CityJeju Island
Period5/18/145/21/14

Fingerprint

Desalination
Adsorption
cycles
adsorption
Water
Temperature
Adsorbents
adsorbents
Condensation
Evaporation
water
Condensers (liquefiers)
condensation
evaporation
material balance
Waste heat
waste heat
Silica gel
inlet temperature
Evaporators

All Science Journal Classification (ASJC) codes

  • Electrical and Electronic Engineering
  • Condensed Matter Physics
  • Control and Systems Engineering
  • Mechanical Engineering

Cite this

Kyaw, T., Kim, Y. D., Shahzad, M. W., Saththasivam, J., & Choon, K. (2014). Performance investigation of an advanced multi-effect adsorption desalination cycle. Paper presented at 7th Asian Conference on Refrigeration and Air Conditioning, ACRA 2014, Jeju Island, Korea, Republic of.

Performance investigation of an advanced multi-effect adsorption desalination cycle. / Kyaw, Thu; Kim, Young Deuk; Shahzad, Muhammad Wakil; Saththasivam, Jayaprakash; Choon, Kim.

2014. Paper presented at 7th Asian Conference on Refrigeration and Air Conditioning, ACRA 2014, Jeju Island, Korea, Republic of.

Research output: Contribution to conferencePaper

Kyaw, T, Kim, YD, Shahzad, MW, Saththasivam, J & Choon, K 2014, 'Performance investigation of an advanced multi-effect adsorption desalination cycle' Paper presented at 7th Asian Conference on Refrigeration and Air Conditioning, ACRA 2014, Jeju Island, Korea, Republic of, 5/18/14 - 5/21/14, .
Kyaw T, Kim YD, Shahzad MW, Saththasivam J, Choon K. Performance investigation of an advanced multi-effect adsorption desalination cycle. 2014. Paper presented at 7th Asian Conference on Refrigeration and Air Conditioning, ACRA 2014, Jeju Island, Korea, Republic of.
Kyaw, Thu ; Kim, Young Deuk ; Shahzad, Muhammad Wakil ; Saththasivam, Jayaprakash ; Choon, Kim. / Performance investigation of an advanced multi-effect adsorption desalination cycle. Paper presented at 7th Asian Conference on Refrigeration and Air Conditioning, ACRA 2014, Jeju Island, Korea, Republic of.
@conference{7c807998b5c74c35b91598f13d03fa11,
title = "Performance investigation of an advanced multi-effect adsorption desalination cycle",
abstract = "Energy recovery scheme using multi-effect evaporation is introduced to Adsorption Desalination (AD) cycles. In the proposed cycle, the condensation energy from the desorption process is recovered multiple times for the evaporation/condensation of the sea water hence it provides improved performance in terms of water production and the specific energy consumption. To demonstrate the advanced multi-effect AD cycle, mathematical model is developed using energy, material and concentration balances for each phase along with the isotherm and kinetics modeling of the sorption processes. Hydrophilic mesoporous silica gel with pore surface area of 800m2/g is selected as the adsorbent due to its excellent uptake of water vapor and low regeneration temperature. Condenser - evaporator heat exchanger with three intermediate effects is employed where the top brine temperature (TBT) and the bottom brine temperature (BBT) are about 35 °C and 7 °C, respectively. It is noted that contrary to the conventional multi-effect distillation (MED) cycle, most of the evaporating - condensing effects in the cycle operate at subatmospheric temperature i.e., less than 30 °C owing to the mass transport phenomena from the vapor uptake by the adsorbent. The performance of the AD cycle is investigated at various hot water inlet temperatures ranging from 65 °C to 85 °C since such kind of heat source is abundantly available from process waste heat or renewable energy. Feed water being evaporated at low temperature, thus, lower scaling and fouling potentials, the proposed AD cycle is a strong candidate for handling highly concentrated feed water (TDS > 100,000 ppm) such as produced water, brine rejected from other desalination plants and zero liquid discharge (ZLD) system.",
author = "Thu Kyaw and Kim, {Young Deuk} and Shahzad, {Muhammad Wakil} and Jayaprakash Saththasivam and Kim Choon",
year = "2014",
month = "1",
day = "1",
language = "English",
note = "7th Asian Conference on Refrigeration and Air Conditioning, ACRA 2014 ; Conference date: 18-05-2014 Through 21-05-2014",

}

TY - CONF

T1 - Performance investigation of an advanced multi-effect adsorption desalination cycle

AU - Kyaw, Thu

AU - Kim, Young Deuk

AU - Shahzad, Muhammad Wakil

AU - Saththasivam, Jayaprakash

AU - Choon, Kim

PY - 2014/1/1

Y1 - 2014/1/1

N2 - Energy recovery scheme using multi-effect evaporation is introduced to Adsorption Desalination (AD) cycles. In the proposed cycle, the condensation energy from the desorption process is recovered multiple times for the evaporation/condensation of the sea water hence it provides improved performance in terms of water production and the specific energy consumption. To demonstrate the advanced multi-effect AD cycle, mathematical model is developed using energy, material and concentration balances for each phase along with the isotherm and kinetics modeling of the sorption processes. Hydrophilic mesoporous silica gel with pore surface area of 800m2/g is selected as the adsorbent due to its excellent uptake of water vapor and low regeneration temperature. Condenser - evaporator heat exchanger with three intermediate effects is employed where the top brine temperature (TBT) and the bottom brine temperature (BBT) are about 35 °C and 7 °C, respectively. It is noted that contrary to the conventional multi-effect distillation (MED) cycle, most of the evaporating - condensing effects in the cycle operate at subatmospheric temperature i.e., less than 30 °C owing to the mass transport phenomena from the vapor uptake by the adsorbent. The performance of the AD cycle is investigated at various hot water inlet temperatures ranging from 65 °C to 85 °C since such kind of heat source is abundantly available from process waste heat or renewable energy. Feed water being evaporated at low temperature, thus, lower scaling and fouling potentials, the proposed AD cycle is a strong candidate for handling highly concentrated feed water (TDS > 100,000 ppm) such as produced water, brine rejected from other desalination plants and zero liquid discharge (ZLD) system.

AB - Energy recovery scheme using multi-effect evaporation is introduced to Adsorption Desalination (AD) cycles. In the proposed cycle, the condensation energy from the desorption process is recovered multiple times for the evaporation/condensation of the sea water hence it provides improved performance in terms of water production and the specific energy consumption. To demonstrate the advanced multi-effect AD cycle, mathematical model is developed using energy, material and concentration balances for each phase along with the isotherm and kinetics modeling of the sorption processes. Hydrophilic mesoporous silica gel with pore surface area of 800m2/g is selected as the adsorbent due to its excellent uptake of water vapor and low regeneration temperature. Condenser - evaporator heat exchanger with three intermediate effects is employed where the top brine temperature (TBT) and the bottom brine temperature (BBT) are about 35 °C and 7 °C, respectively. It is noted that contrary to the conventional multi-effect distillation (MED) cycle, most of the evaporating - condensing effects in the cycle operate at subatmospheric temperature i.e., less than 30 °C owing to the mass transport phenomena from the vapor uptake by the adsorbent. The performance of the AD cycle is investigated at various hot water inlet temperatures ranging from 65 °C to 85 °C since such kind of heat source is abundantly available from process waste heat or renewable energy. Feed water being evaporated at low temperature, thus, lower scaling and fouling potentials, the proposed AD cycle is a strong candidate for handling highly concentrated feed water (TDS > 100,000 ppm) such as produced water, brine rejected from other desalination plants and zero liquid discharge (ZLD) system.

UR - http://www.scopus.com/inward/record.url?scp=84928139876&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84928139876&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:84928139876

ER -