Preparation of Model SOFCs with Proton-Conducting Electrolyte on Metal Support Using Pulse Laser Deposition

Katsuya Miyamoto, Tsutomu Kawabata, Yuya Tachikawa, Junko Matsuda, Shunsuke Taniguchi, Yoshio Matsuzaki, Akari Hayashi, Kazunari Sasaki

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Since operating temperature of solid oxide fuel cells (SOFCs) is relatively high, SOFCs must consist of heat resistant components, such as ceramics, which results in high cost. In this study, SOFCs with a proton-conductor as the electrolyte membrane was fabricated on metal supports and examined for lower-temperature operation of SOFCs. Technological issues of such metal-supported proton-conducting SOFCs (p-SOFCs) prepared by pulse laser deposition (PLD) are analyzed through microstructural observation and electrochemical characterization.

Original languageEnglish
Title of host publication17th International Symposium on Solid Oxide Fuel Cells, SOFC 2021
PublisherIOP Publishing Ltd.
Pages2033-2040
Number of pages8
Edition1
ISBN (Electronic)9781607685395
DOIs
Publication statusPublished - 2021
Event17th International Symposium on Solid Oxide Fuel Cells, SOFC 2021 - Stockholm, Sweden
Duration: Jul 18 2021Jul 23 2021

Publication series

NameECS Transactions
Number1
Volume103
ISSN (Print)1938-6737
ISSN (Electronic)1938-5862

Conference

Conference17th International Symposium on Solid Oxide Fuel Cells, SOFC 2021
Country/TerritorySweden
CityStockholm
Period7/18/217/23/21

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Fingerprint

Dive into the research topics of 'Preparation of Model SOFCs with Proton-Conducting Electrolyte on Metal Support Using Pulse Laser Deposition'. Together they form a unique fingerprint.

Cite this