Preparation of Porous α-TCP by Fusion of DCPD Coated α-TCP Spheres

Tya Indah Arifta, M. L. Munar, Kanji Tsuru, Kunio Ishikawa

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The aim of present study was to fabricate porous α-Tricalcium phosphate (α-TCP) with adequate mechanical strength and pore interconnectivity. First step, α-TCP spheres were exposed to acidic calcium phosphate solution to allow growth and interlocking of dicalcium phosphate dihydrate (DCPD) crystals precipitated on the surface of the α-TCP spheres. Then, the DCPDcoated α-TCP spheres were sintered at 1,500°C for 6h, which resulted in the fusion of spheres to form the interconnected porous block. XRD analysis showed single phase α-TCP was obtained. Mechanical strength of porous α-TCP was 6.9 ± 1.6 MPa and porosity was 53 ± 5%. The obtained porous α-TCP could be employed as potential bone substitute or precursor for other bioceramics like carbonate apatite and hydroxyapatite.

Original languageEnglish
Title of host publicationBioceramics 27
EditorsIka Dewi Ana, Kuwat Triyana
PublisherTrans Tech Publications Ltd
Pages57-59
Number of pages3
ISBN (Print)9783035710403
DOIs
Publication statusPublished - Jan 1 2016
Event27th Symposium and Annual Meeting of the International Society for Ceramics in Medicine, 2015 - Bali, Indonesia
Duration: Oct 27 2015Oct 29 2015

Publication series

NameKey Engineering Materials
Volume696
ISSN (Print)1013-9826

Other

Other27th Symposium and Annual Meeting of the International Society for Ceramics in Medicine, 2015
CountryIndonesia
CityBali
Period10/27/1510/29/15

Fingerprint

Phosphates
Fusion reactions
Strength of materials
Bone Substitutes
Bioceramics
Apatite
Calcium phosphate
Durapatite
Hydroxyapatite
Carbonates
Bone
Porosity
Crystals
dibasic calcium phosphate dihydrate

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Arifta, T. I., Munar, M. L., Tsuru, K., & Ishikawa, K. (2016). Preparation of Porous α-TCP by Fusion of DCPD Coated α-TCP Spheres. In I. D. Ana, & K. Triyana (Eds.), Bioceramics 27 (pp. 57-59). (Key Engineering Materials; Vol. 696). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/KEM.696.57

Preparation of Porous α-TCP by Fusion of DCPD Coated α-TCP Spheres. / Arifta, Tya Indah; Munar, M. L.; Tsuru, Kanji; Ishikawa, Kunio.

Bioceramics 27. ed. / Ika Dewi Ana; Kuwat Triyana. Trans Tech Publications Ltd, 2016. p. 57-59 (Key Engineering Materials; Vol. 696).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Arifta, TI, Munar, ML, Tsuru, K & Ishikawa, K 2016, Preparation of Porous α-TCP by Fusion of DCPD Coated α-TCP Spheres. in ID Ana & K Triyana (eds), Bioceramics 27. Key Engineering Materials, vol. 696, Trans Tech Publications Ltd, pp. 57-59, 27th Symposium and Annual Meeting of the International Society for Ceramics in Medicine, 2015, Bali, Indonesia, 10/27/15. https://doi.org/10.4028/www.scientific.net/KEM.696.57
Arifta TI, Munar ML, Tsuru K, Ishikawa K. Preparation of Porous α-TCP by Fusion of DCPD Coated α-TCP Spheres. In Ana ID, Triyana K, editors, Bioceramics 27. Trans Tech Publications Ltd. 2016. p. 57-59. (Key Engineering Materials). https://doi.org/10.4028/www.scientific.net/KEM.696.57
Arifta, Tya Indah ; Munar, M. L. ; Tsuru, Kanji ; Ishikawa, Kunio. / Preparation of Porous α-TCP by Fusion of DCPD Coated α-TCP Spheres. Bioceramics 27. editor / Ika Dewi Ana ; Kuwat Triyana. Trans Tech Publications Ltd, 2016. pp. 57-59 (Key Engineering Materials).
@inproceedings{e7a11b0af50f4f2b9669180e50a4d12c,
title = "Preparation of Porous α-TCP by Fusion of DCPD Coated α-TCP Spheres",
abstract = "The aim of present study was to fabricate porous α-Tricalcium phosphate (α-TCP) with adequate mechanical strength and pore interconnectivity. First step, α-TCP spheres were exposed to acidic calcium phosphate solution to allow growth and interlocking of dicalcium phosphate dihydrate (DCPD) crystals precipitated on the surface of the α-TCP spheres. Then, the DCPDcoated α-TCP spheres were sintered at 1,500°C for 6h, which resulted in the fusion of spheres to form the interconnected porous block. XRD analysis showed single phase α-TCP was obtained. Mechanical strength of porous α-TCP was 6.9 ± 1.6 MPa and porosity was 53 ± 5{\%}. The obtained porous α-TCP could be employed as potential bone substitute or precursor for other bioceramics like carbonate apatite and hydroxyapatite.",
author = "Arifta, {Tya Indah} and Munar, {M. L.} and Kanji Tsuru and Kunio Ishikawa",
year = "2016",
month = "1",
day = "1",
doi = "10.4028/www.scientific.net/KEM.696.57",
language = "English",
isbn = "9783035710403",
series = "Key Engineering Materials",
publisher = "Trans Tech Publications Ltd",
pages = "57--59",
editor = "Ana, {Ika Dewi} and Kuwat Triyana",
booktitle = "Bioceramics 27",

}

TY - GEN

T1 - Preparation of Porous α-TCP by Fusion of DCPD Coated α-TCP Spheres

AU - Arifta, Tya Indah

AU - Munar, M. L.

AU - Tsuru, Kanji

AU - Ishikawa, Kunio

PY - 2016/1/1

Y1 - 2016/1/1

N2 - The aim of present study was to fabricate porous α-Tricalcium phosphate (α-TCP) with adequate mechanical strength and pore interconnectivity. First step, α-TCP spheres were exposed to acidic calcium phosphate solution to allow growth and interlocking of dicalcium phosphate dihydrate (DCPD) crystals precipitated on the surface of the α-TCP spheres. Then, the DCPDcoated α-TCP spheres were sintered at 1,500°C for 6h, which resulted in the fusion of spheres to form the interconnected porous block. XRD analysis showed single phase α-TCP was obtained. Mechanical strength of porous α-TCP was 6.9 ± 1.6 MPa and porosity was 53 ± 5%. The obtained porous α-TCP could be employed as potential bone substitute or precursor for other bioceramics like carbonate apatite and hydroxyapatite.

AB - The aim of present study was to fabricate porous α-Tricalcium phosphate (α-TCP) with adequate mechanical strength and pore interconnectivity. First step, α-TCP spheres were exposed to acidic calcium phosphate solution to allow growth and interlocking of dicalcium phosphate dihydrate (DCPD) crystals precipitated on the surface of the α-TCP spheres. Then, the DCPDcoated α-TCP spheres were sintered at 1,500°C for 6h, which resulted in the fusion of spheres to form the interconnected porous block. XRD analysis showed single phase α-TCP was obtained. Mechanical strength of porous α-TCP was 6.9 ± 1.6 MPa and porosity was 53 ± 5%. The obtained porous α-TCP could be employed as potential bone substitute or precursor for other bioceramics like carbonate apatite and hydroxyapatite.

UR - http://www.scopus.com/inward/record.url?scp=84973468883&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84973468883&partnerID=8YFLogxK

U2 - 10.4028/www.scientific.net/KEM.696.57

DO - 10.4028/www.scientific.net/KEM.696.57

M3 - Conference contribution

AN - SCOPUS:84973468883

SN - 9783035710403

T3 - Key Engineering Materials

SP - 57

EP - 59

BT - Bioceramics 27

A2 - Ana, Ika Dewi

A2 - Triyana, Kuwat

PB - Trans Tech Publications Ltd

ER -