Preparation of porous La(Sr)Ti(Fe)O3 perovskite oxide tube by filament-winding method

Akihiro Kawahara, Yousuke Takahashi, Yuji Hirano, Masayoshi Hirano, Tatsumi Ishihara

Research output: Contribution to journalArticle

Abstract

Porous ceramic tubes consisting of La0.7Sr0.3Ti 0.7Fe0.3O3 (LSTF) perovskite oxide was investigated in this study by using Filament-Winding (FW) method. When methacrylic acid with molecular weight of 50000 was used for organic binder, LSTF fiber with 0.5 mm in diameter and 15 m in length can be obtained by extrusion method. Although the mechanical strength of the obtained LSTF fiber was lower than that of the polymer fiber used for FW method, the obtained LSTF fiber showed reasonably large strength and expand ratio. As a result, LSTF porous tube can be obtained by FW method and calcination at 1673 K. Comparing with the porous tube prepared by a conventional sintering method, it was found that the obtained LSTF tube showed much larger porosity (ca. 80 %) and large air permeation rate.

Original languageEnglish
Pages (from-to)252-255
Number of pages4
JournalElectrochemistry
Volume79
Issue number4
DOIs
Publication statusPublished - Apr 2011

Fingerprint

Filament winding
Perovskite
Oxides
Fibers
Permeation
Calcination
Strength of materials
Binders
Extrusion
Polymers
Sintering
Porosity
Molecular weight
Acids
perovskite
Air

All Science Journal Classification (ASJC) codes

  • Electrochemistry

Cite this

Preparation of porous La(Sr)Ti(Fe)O3 perovskite oxide tube by filament-winding method. / Kawahara, Akihiro; Takahashi, Yousuke; Hirano, Yuji; Hirano, Masayoshi; Ishihara, Tatsumi.

In: Electrochemistry, Vol. 79, No. 4, 04.2011, p. 252-255.

Research output: Contribution to journalArticle

Kawahara, Akihiro ; Takahashi, Yousuke ; Hirano, Yuji ; Hirano, Masayoshi ; Ishihara, Tatsumi. / Preparation of porous La(Sr)Ti(Fe)O3 perovskite oxide tube by filament-winding method. In: Electrochemistry. 2011 ; Vol. 79, No. 4. pp. 252-255.
@article{8b39d35e216b47e28857101ae92735ed,
title = "Preparation of porous La(Sr)Ti(Fe)O3 perovskite oxide tube by filament-winding method",
abstract = "Porous ceramic tubes consisting of La0.7Sr0.3Ti 0.7Fe0.3O3 (LSTF) perovskite oxide was investigated in this study by using Filament-Winding (FW) method. When methacrylic acid with molecular weight of 50000 was used for organic binder, LSTF fiber with 0.5 mm in diameter and 15 m in length can be obtained by extrusion method. Although the mechanical strength of the obtained LSTF fiber was lower than that of the polymer fiber used for FW method, the obtained LSTF fiber showed reasonably large strength and expand ratio. As a result, LSTF porous tube can be obtained by FW method and calcination at 1673 K. Comparing with the porous tube prepared by a conventional sintering method, it was found that the obtained LSTF tube showed much larger porosity (ca. 80 {\%}) and large air permeation rate.",
author = "Akihiro Kawahara and Yousuke Takahashi and Yuji Hirano and Masayoshi Hirano and Tatsumi Ishihara",
year = "2011",
month = "4",
doi = "10.5796/electrochemistry.79.252",
language = "English",
volume = "79",
pages = "252--255",
journal = "Electrochemistry",
issn = "1344-3542",
publisher = "The Electrochemical Society of Japan",
number = "4",

}

TY - JOUR

T1 - Preparation of porous La(Sr)Ti(Fe)O3 perovskite oxide tube by filament-winding method

AU - Kawahara, Akihiro

AU - Takahashi, Yousuke

AU - Hirano, Yuji

AU - Hirano, Masayoshi

AU - Ishihara, Tatsumi

PY - 2011/4

Y1 - 2011/4

N2 - Porous ceramic tubes consisting of La0.7Sr0.3Ti 0.7Fe0.3O3 (LSTF) perovskite oxide was investigated in this study by using Filament-Winding (FW) method. When methacrylic acid with molecular weight of 50000 was used for organic binder, LSTF fiber with 0.5 mm in diameter and 15 m in length can be obtained by extrusion method. Although the mechanical strength of the obtained LSTF fiber was lower than that of the polymer fiber used for FW method, the obtained LSTF fiber showed reasonably large strength and expand ratio. As a result, LSTF porous tube can be obtained by FW method and calcination at 1673 K. Comparing with the porous tube prepared by a conventional sintering method, it was found that the obtained LSTF tube showed much larger porosity (ca. 80 %) and large air permeation rate.

AB - Porous ceramic tubes consisting of La0.7Sr0.3Ti 0.7Fe0.3O3 (LSTF) perovskite oxide was investigated in this study by using Filament-Winding (FW) method. When methacrylic acid with molecular weight of 50000 was used for organic binder, LSTF fiber with 0.5 mm in diameter and 15 m in length can be obtained by extrusion method. Although the mechanical strength of the obtained LSTF fiber was lower than that of the polymer fiber used for FW method, the obtained LSTF fiber showed reasonably large strength and expand ratio. As a result, LSTF porous tube can be obtained by FW method and calcination at 1673 K. Comparing with the porous tube prepared by a conventional sintering method, it was found that the obtained LSTF tube showed much larger porosity (ca. 80 %) and large air permeation rate.

UR - http://www.scopus.com/inward/record.url?scp=79958177725&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79958177725&partnerID=8YFLogxK

U2 - 10.5796/electrochemistry.79.252

DO - 10.5796/electrochemistry.79.252

M3 - Article

AN - SCOPUS:79958177725

VL - 79

SP - 252

EP - 255

JO - Electrochemistry

JF - Electrochemistry

SN - 1344-3542

IS - 4

ER -