Process study on alumina-zirconia nanocomposite via ammonolysis route

Naoya Enomoto, Jun Min Tang, Masato Uehara, Hideaki Maeda, Junichi Hojo, Zenbe E. Nakagawa

    Research output: Contribution to journalArticlepeer-review

    2 Citations (Scopus)

    Abstract

    Wet-chemical process using ammonia to precipitate aluminum ions dissolved in a zirconia sol solution is examined. Formation of crystalline bayerite is unfavorable for fine dispersion of zirconia nanoparticles in alumina matrix after heat treatment. To avoid the bayerite formation, it was preferred to make a precipitation with a diluted ammonia or with an ammonia gas flow at high temperature. By optimizing the precipitation process and the calcination temperature, we successfully prepared the uniform microstructure in which tetragonal zirconia particles of ∼30 nm is finely dispersed within the alumina grains.

    Original languageEnglish
    Pages (from-to)88-91
    Number of pages4
    JournalJournal of Ceramic Processing Research
    Volume1
    Issue number2
    Publication statusPublished - Dec 1 2000

    All Science Journal Classification (ASJC) codes

    • Ceramics and Composites

    Fingerprint

    Dive into the research topics of 'Process study on alumina-zirconia nanocomposite via ammonolysis route'. Together they form a unique fingerprint.

    Cite this