Processing for coated conductors by modified TFA-MOD method

Hiroshi Fuji, Tetsuji Honjo, Ryo Teranishi, Yoshitaka Tokunaga, Junko Matsuda, Shigenobu Asada, Yutaka Yamada, Teruo Izumi, Yuh Shiohara, Yasuhiro Iijima, Takashi Saitoh

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

The influence of the gas flow direction in the high temperature YBCO crystallization heat treatment and the fabrication of a long Y123 tape conductor by reel-to-reel system, using the modified TFA-MOD method were investigated. In high temperature heat treatment, the films were traveled in along tube furnace held at 1036K in a forming gas of Ar, 0.1% and 6.3% H2O by reel-to-reel system. The multi-coating process was applied using the new starting materials to obtain high Ic performance. It was found that the transverse gas flow to the length is necessary to obtain the uniform reaction for a long tape production.

Original languageEnglish
Article numberEE5.30
Pages (from-to)117-119
Number of pages3
JournalUnknown Journal
VolumeEXS
Issue number3
Publication statusPublished - 2004
Externally publishedYes

Fingerprint

gas flow
Tapes
Flow of gases
Heat treatment
Processing
Crystallization
coating
Furnaces
crystallization
Gases
Fabrication
Coatings
Temperature
gas
method
Direction compound
furnace
new material

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials

Cite this

Fuji, H., Honjo, T., Teranishi, R., Tokunaga, Y., Matsuda, J., Asada, S., ... Saitoh, T. (2004). Processing for coated conductors by modified TFA-MOD method. Unknown Journal, EXS(3), 117-119. [EE5.30].

Processing for coated conductors by modified TFA-MOD method. / Fuji, Hiroshi; Honjo, Tetsuji; Teranishi, Ryo; Tokunaga, Yoshitaka; Matsuda, Junko; Asada, Shigenobu; Yamada, Yutaka; Izumi, Teruo; Shiohara, Yuh; Iijima, Yasuhiro; Saitoh, Takashi.

In: Unknown Journal, Vol. EXS, No. 3, EE5.30, 2004, p. 117-119.

Research output: Contribution to journalArticle

Fuji, H, Honjo, T, Teranishi, R, Tokunaga, Y, Matsuda, J, Asada, S, Yamada, Y, Izumi, T, Shiohara, Y, Iijima, Y & Saitoh, T 2004, 'Processing for coated conductors by modified TFA-MOD method', Unknown Journal, vol. EXS, no. 3, EE5.30, pp. 117-119.
Fuji H, Honjo T, Teranishi R, Tokunaga Y, Matsuda J, Asada S et al. Processing for coated conductors by modified TFA-MOD method. Unknown Journal. 2004;EXS(3):117-119. EE5.30.
Fuji, Hiroshi ; Honjo, Tetsuji ; Teranishi, Ryo ; Tokunaga, Yoshitaka ; Matsuda, Junko ; Asada, Shigenobu ; Yamada, Yutaka ; Izumi, Teruo ; Shiohara, Yuh ; Iijima, Yasuhiro ; Saitoh, Takashi. / Processing for coated conductors by modified TFA-MOD method. In: Unknown Journal. 2004 ; Vol. EXS, No. 3. pp. 117-119.
@article{42f6d83e6ec64be3afec2478f9f455fe,
title = "Processing for coated conductors by modified TFA-MOD method",
abstract = "The influence of the gas flow direction in the high temperature YBCO crystallization heat treatment and the fabrication of a long Y123 tape conductor by reel-to-reel system, using the modified TFA-MOD method were investigated. In high temperature heat treatment, the films were traveled in along tube furnace held at 1036K in a forming gas of Ar, 0.1{\%} and 6.3{\%} H2O by reel-to-reel system. The multi-coating process was applied using the new starting materials to obtain high Ic performance. It was found that the transverse gas flow to the length is necessary to obtain the uniform reaction for a long tape production.",
author = "Hiroshi Fuji and Tetsuji Honjo and Ryo Teranishi and Yoshitaka Tokunaga and Junko Matsuda and Shigenobu Asada and Yutaka Yamada and Teruo Izumi and Yuh Shiohara and Yasuhiro Iijima and Takashi Saitoh",
year = "2004",
language = "English",
volume = "EXS",
pages = "117--119",
journal = "Quaternary International",
issn = "1040-6182",
publisher = "Elsevier Limited",
number = "3",

}

TY - JOUR

T1 - Processing for coated conductors by modified TFA-MOD method

AU - Fuji, Hiroshi

AU - Honjo, Tetsuji

AU - Teranishi, Ryo

AU - Tokunaga, Yoshitaka

AU - Matsuda, Junko

AU - Asada, Shigenobu

AU - Yamada, Yutaka

AU - Izumi, Teruo

AU - Shiohara, Yuh

AU - Iijima, Yasuhiro

AU - Saitoh, Takashi

PY - 2004

Y1 - 2004

N2 - The influence of the gas flow direction in the high temperature YBCO crystallization heat treatment and the fabrication of a long Y123 tape conductor by reel-to-reel system, using the modified TFA-MOD method were investigated. In high temperature heat treatment, the films were traveled in along tube furnace held at 1036K in a forming gas of Ar, 0.1% and 6.3% H2O by reel-to-reel system. The multi-coating process was applied using the new starting materials to obtain high Ic performance. It was found that the transverse gas flow to the length is necessary to obtain the uniform reaction for a long tape production.

AB - The influence of the gas flow direction in the high temperature YBCO crystallization heat treatment and the fabrication of a long Y123 tape conductor by reel-to-reel system, using the modified TFA-MOD method were investigated. In high temperature heat treatment, the films were traveled in along tube furnace held at 1036K in a forming gas of Ar, 0.1% and 6.3% H2O by reel-to-reel system. The multi-coating process was applied using the new starting materials to obtain high Ic performance. It was found that the transverse gas flow to the length is necessary to obtain the uniform reaction for a long tape production.

UR - http://www.scopus.com/inward/record.url?scp=23844451843&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=23844451843&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:23844451843

VL - EXS

SP - 117

EP - 119

JO - Quaternary International

JF - Quaternary International

SN - 1040-6182

IS - 3

M1 - EE5.30

ER -