Processing of Y-based coated conductors by TFA-MOD method

Teruo Izumi, Masateru Yoshizumi, Junko Matsuda, Koichi Nakaoka, Yasunori Sutoh, Tatsuhisa Nakanishi, Akinobu Nakai, Masashi Miura, Yutaka Yamada, Tsutomu Koizumi, Yuji Aoki, Akimasa Yajima, Yuh Shiohara

Research output: Contribution to journalArticle

Abstract

The recent progress in the development of TFA-MOD for a long coated conductor is reviewed. The TFA-MOD process is expected as a low cost process to realize the power application using coated conductors. On the effort for high Jc values, the drastic improvement of Jc value was realized by the control of the composition in starting material. Although the same composition as a stoichiometric one of YBa2Cu3O 7 had been used in the previous development, it was found that the shift to Ba-poor composition could make Jc values higher. The composition of Y : Ba : Cu = 1 : 1.5 : 3 has a peak Jc value in the relation of Jc and Ba-ratio. Consequently, an extremely high I c value of 735 A/cm-width (@77 K, self field) was achieved. In the development by the batch system, it had been difficult to obtain high characteristics in the long tape. The problem was addressed by the numerical analysis considering gas flow and reaction in the film. Then, a 200 m tape with End-to-End Ic value of 201 A/cm-width was realized. Based on the above mentioned results, a large facility for 500 m was installed.

Original languageEnglish
Pages (from-to)1017-1023
Number of pages7
JournalNippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
Volume71
Issue number11
DOIs
Publication statusPublished - Nov 1 2007

Fingerprint

conductors
Processing
Chemical analysis
Tapes
tapes
numerical analysis
gas flow
Flow of gases
Numerical analysis
shift
Costs

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Mechanics of Materials
  • Metals and Alloys
  • Materials Chemistry

Cite this

Processing of Y-based coated conductors by TFA-MOD method. / Izumi, Teruo; Yoshizumi, Masateru; Matsuda, Junko; Nakaoka, Koichi; Sutoh, Yasunori; Nakanishi, Tatsuhisa; Nakai, Akinobu; Miura, Masashi; Yamada, Yutaka; Koizumi, Tsutomu; Aoki, Yuji; Yajima, Akimasa; Shiohara, Yuh.

In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, Vol. 71, No. 11, 01.11.2007, p. 1017-1023.

Research output: Contribution to journalArticle

Izumi, T, Yoshizumi, M, Matsuda, J, Nakaoka, K, Sutoh, Y, Nakanishi, T, Nakai, A, Miura, M, Yamada, Y, Koizumi, T, Aoki, Y, Yajima, A & Shiohara, Y 2007, 'Processing of Y-based coated conductors by TFA-MOD method', Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, vol. 71, no. 11, pp. 1017-1023. https://doi.org/10.2320/jinstmet.71.1017
Izumi, Teruo ; Yoshizumi, Masateru ; Matsuda, Junko ; Nakaoka, Koichi ; Sutoh, Yasunori ; Nakanishi, Tatsuhisa ; Nakai, Akinobu ; Miura, Masashi ; Yamada, Yutaka ; Koizumi, Tsutomu ; Aoki, Yuji ; Yajima, Akimasa ; Shiohara, Yuh. / Processing of Y-based coated conductors by TFA-MOD method. In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 2007 ; Vol. 71, No. 11. pp. 1017-1023.
@article{5a6b8e6b5ffa4e9ab4ae8165d9b5a54e,
title = "Processing of Y-based coated conductors by TFA-MOD method",
abstract = "The recent progress in the development of TFA-MOD for a long coated conductor is reviewed. The TFA-MOD process is expected as a low cost process to realize the power application using coated conductors. On the effort for high Jc values, the drastic improvement of Jc value was realized by the control of the composition in starting material. Although the same composition as a stoichiometric one of YBa2Cu3O 7 had been used in the previous development, it was found that the shift to Ba-poor composition could make Jc values higher. The composition of Y : Ba : Cu = 1 : 1.5 : 3 has a peak Jc value in the relation of Jc and Ba-ratio. Consequently, an extremely high I c value of 735 A/cm-width (@77 K, self field) was achieved. In the development by the batch system, it had been difficult to obtain high characteristics in the long tape. The problem was addressed by the numerical analysis considering gas flow and reaction in the film. Then, a 200 m tape with End-to-End Ic value of 201 A/cm-width was realized. Based on the above mentioned results, a large facility for 500 m was installed.",
author = "Teruo Izumi and Masateru Yoshizumi and Junko Matsuda and Koichi Nakaoka and Yasunori Sutoh and Tatsuhisa Nakanishi and Akinobu Nakai and Masashi Miura and Yutaka Yamada and Tsutomu Koizumi and Yuji Aoki and Akimasa Yajima and Yuh Shiohara",
year = "2007",
month = "11",
day = "1",
doi = "10.2320/jinstmet.71.1017",
language = "English",
volume = "71",
pages = "1017--1023",
journal = "Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals",
issn = "0021-4876",
publisher = "公益社団法人 日本金属学会",
number = "11",

}

TY - JOUR

T1 - Processing of Y-based coated conductors by TFA-MOD method

AU - Izumi, Teruo

AU - Yoshizumi, Masateru

AU - Matsuda, Junko

AU - Nakaoka, Koichi

AU - Sutoh, Yasunori

AU - Nakanishi, Tatsuhisa

AU - Nakai, Akinobu

AU - Miura, Masashi

AU - Yamada, Yutaka

AU - Koizumi, Tsutomu

AU - Aoki, Yuji

AU - Yajima, Akimasa

AU - Shiohara, Yuh

PY - 2007/11/1

Y1 - 2007/11/1

N2 - The recent progress in the development of TFA-MOD for a long coated conductor is reviewed. The TFA-MOD process is expected as a low cost process to realize the power application using coated conductors. On the effort for high Jc values, the drastic improvement of Jc value was realized by the control of the composition in starting material. Although the same composition as a stoichiometric one of YBa2Cu3O 7 had been used in the previous development, it was found that the shift to Ba-poor composition could make Jc values higher. The composition of Y : Ba : Cu = 1 : 1.5 : 3 has a peak Jc value in the relation of Jc and Ba-ratio. Consequently, an extremely high I c value of 735 A/cm-width (@77 K, self field) was achieved. In the development by the batch system, it had been difficult to obtain high characteristics in the long tape. The problem was addressed by the numerical analysis considering gas flow and reaction in the film. Then, a 200 m tape with End-to-End Ic value of 201 A/cm-width was realized. Based on the above mentioned results, a large facility for 500 m was installed.

AB - The recent progress in the development of TFA-MOD for a long coated conductor is reviewed. The TFA-MOD process is expected as a low cost process to realize the power application using coated conductors. On the effort for high Jc values, the drastic improvement of Jc value was realized by the control of the composition in starting material. Although the same composition as a stoichiometric one of YBa2Cu3O 7 had been used in the previous development, it was found that the shift to Ba-poor composition could make Jc values higher. The composition of Y : Ba : Cu = 1 : 1.5 : 3 has a peak Jc value in the relation of Jc and Ba-ratio. Consequently, an extremely high I c value of 735 A/cm-width (@77 K, self field) was achieved. In the development by the batch system, it had been difficult to obtain high characteristics in the long tape. The problem was addressed by the numerical analysis considering gas flow and reaction in the film. Then, a 200 m tape with End-to-End Ic value of 201 A/cm-width was realized. Based on the above mentioned results, a large facility for 500 m was installed.

UR - http://www.scopus.com/inward/record.url?scp=37749032506&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=37749032506&partnerID=8YFLogxK

U2 - 10.2320/jinstmet.71.1017

DO - 10.2320/jinstmet.71.1017

M3 - Article

AN - SCOPUS:37749032506

VL - 71

SP - 1017

EP - 1023

JO - Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals

JF - Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals

SN - 0021-4876

IS - 11

ER -