Progress in development of coated conductors by TFA-MOD processing

Teruo Izumi, Yoshitaka Tokunaga, Hiroshi Fuji, Ryo Teranishi, Junko Matsuda, Sigenobu Asada, Tetsuji Honjo, Yuh Shiohara, Takemi Muroga, Seiki Miyata, Tomonori Watanabe, Yutaka Yamada, Yasuhiro Iijima, Takashi Saitoh, Tomotaka Goto, Atsuya Yoshinaka, Akimasa Yajima

Research output: Contribution to journalArticle

38 Citations (Scopus)

Abstract

The recent progress in R&D of coated conductors by TFA-MOD process was reviewed. For the several targets, such as high superconducting performance, high production rate, long tape etc., the steady progresses could be recognized. The high Jc and Ic values of 3.6 MA/cm2 and 291 A were achieved by using a highly aligned CeO2 cap on an IBAD-GZO layer and optimizing the conditions in the multi-coating process, respectively. For improving the production rate, the calcination time was extremely reduced by the development of the new combination of the starting materials. As the improvement of the production rate, the process for achieving high growth rate was investigated by controlling the atmosphere conditions in the high temperature heat treatment. It was found that both high humid partial pressure and low total pressure conditions were both effective to improve the growth rate and the three times higher growth rate with maintaining high Jc than that in the conventional conditions was confirmed. Additionally, a 0.25 m long tape with uniform Ic values over 200 A and the end-to-end I c value of 210 A was successfully fabricated with traveling in the furnace of the Reel-to-Reel system.

Original languageEnglish
Pages (from-to)885-889
Number of pages5
JournalPhysica C: Superconductivity and its applications
Volume412-414
Issue numberSPEC. ISS.
DOIs
Publication statusPublished - Oct 1 2004
Externally publishedYes

Fingerprint

conductors
Tapes
Processing
Ion beam assisted deposition
Partial pressure
Calcination
tapes
Furnaces
Heat treatment
Coatings
caps
roasting
furnaces
partial pressure
coating
heat treatment
atmospheres
Temperature

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Energy Engineering and Power Technology
  • Electrical and Electronic Engineering

Cite this

Progress in development of coated conductors by TFA-MOD processing. / Izumi, Teruo; Tokunaga, Yoshitaka; Fuji, Hiroshi; Teranishi, Ryo; Matsuda, Junko; Asada, Sigenobu; Honjo, Tetsuji; Shiohara, Yuh; Muroga, Takemi; Miyata, Seiki; Watanabe, Tomonori; Yamada, Yutaka; Iijima, Yasuhiro; Saitoh, Takashi; Goto, Tomotaka; Yoshinaka, Atsuya; Yajima, Akimasa.

In: Physica C: Superconductivity and its applications, Vol. 412-414, No. SPEC. ISS., 01.10.2004, p. 885-889.

Research output: Contribution to journalArticle

Izumi, T, Tokunaga, Y, Fuji, H, Teranishi, R, Matsuda, J, Asada, S, Honjo, T, Shiohara, Y, Muroga, T, Miyata, S, Watanabe, T, Yamada, Y, Iijima, Y, Saitoh, T, Goto, T, Yoshinaka, A & Yajima, A 2004, 'Progress in development of coated conductors by TFA-MOD processing', Physica C: Superconductivity and its applications, vol. 412-414, no. SPEC. ISS., pp. 885-889. https://doi.org/10.1016/j.physc.2003.12.095
Izumi, Teruo ; Tokunaga, Yoshitaka ; Fuji, Hiroshi ; Teranishi, Ryo ; Matsuda, Junko ; Asada, Sigenobu ; Honjo, Tetsuji ; Shiohara, Yuh ; Muroga, Takemi ; Miyata, Seiki ; Watanabe, Tomonori ; Yamada, Yutaka ; Iijima, Yasuhiro ; Saitoh, Takashi ; Goto, Tomotaka ; Yoshinaka, Atsuya ; Yajima, Akimasa. / Progress in development of coated conductors by TFA-MOD processing. In: Physica C: Superconductivity and its applications. 2004 ; Vol. 412-414, No. SPEC. ISS. pp. 885-889.
@article{25a422497adf47eabedeb324e746180e,
title = "Progress in development of coated conductors by TFA-MOD processing",
abstract = "The recent progress in R&D of coated conductors by TFA-MOD process was reviewed. For the several targets, such as high superconducting performance, high production rate, long tape etc., the steady progresses could be recognized. The high Jc and Ic values of 3.6 MA/cm2 and 291 A were achieved by using a highly aligned CeO2 cap on an IBAD-GZO layer and optimizing the conditions in the multi-coating process, respectively. For improving the production rate, the calcination time was extremely reduced by the development of the new combination of the starting materials. As the improvement of the production rate, the process for achieving high growth rate was investigated by controlling the atmosphere conditions in the high temperature heat treatment. It was found that both high humid partial pressure and low total pressure conditions were both effective to improve the growth rate and the three times higher growth rate with maintaining high Jc than that in the conventional conditions was confirmed. Additionally, a 0.25 m long tape with uniform Ic values over 200 A and the end-to-end I c value of 210 A was successfully fabricated with traveling in the furnace of the Reel-to-Reel system.",
author = "Teruo Izumi and Yoshitaka Tokunaga and Hiroshi Fuji and Ryo Teranishi and Junko Matsuda and Sigenobu Asada and Tetsuji Honjo and Yuh Shiohara and Takemi Muroga and Seiki Miyata and Tomonori Watanabe and Yutaka Yamada and Yasuhiro Iijima and Takashi Saitoh and Tomotaka Goto and Atsuya Yoshinaka and Akimasa Yajima",
year = "2004",
month = "10",
day = "1",
doi = "10.1016/j.physc.2003.12.095",
language = "English",
volume = "412-414",
pages = "885--889",
journal = "Physica C: Superconductivity and its Applications",
issn = "0921-4534",
publisher = "Elsevier",
number = "SPEC. ISS.",

}

TY - JOUR

T1 - Progress in development of coated conductors by TFA-MOD processing

AU - Izumi, Teruo

AU - Tokunaga, Yoshitaka

AU - Fuji, Hiroshi

AU - Teranishi, Ryo

AU - Matsuda, Junko

AU - Asada, Sigenobu

AU - Honjo, Tetsuji

AU - Shiohara, Yuh

AU - Muroga, Takemi

AU - Miyata, Seiki

AU - Watanabe, Tomonori

AU - Yamada, Yutaka

AU - Iijima, Yasuhiro

AU - Saitoh, Takashi

AU - Goto, Tomotaka

AU - Yoshinaka, Atsuya

AU - Yajima, Akimasa

PY - 2004/10/1

Y1 - 2004/10/1

N2 - The recent progress in R&D of coated conductors by TFA-MOD process was reviewed. For the several targets, such as high superconducting performance, high production rate, long tape etc., the steady progresses could be recognized. The high Jc and Ic values of 3.6 MA/cm2 and 291 A were achieved by using a highly aligned CeO2 cap on an IBAD-GZO layer and optimizing the conditions in the multi-coating process, respectively. For improving the production rate, the calcination time was extremely reduced by the development of the new combination of the starting materials. As the improvement of the production rate, the process for achieving high growth rate was investigated by controlling the atmosphere conditions in the high temperature heat treatment. It was found that both high humid partial pressure and low total pressure conditions were both effective to improve the growth rate and the three times higher growth rate with maintaining high Jc than that in the conventional conditions was confirmed. Additionally, a 0.25 m long tape with uniform Ic values over 200 A and the end-to-end I c value of 210 A was successfully fabricated with traveling in the furnace of the Reel-to-Reel system.

AB - The recent progress in R&D of coated conductors by TFA-MOD process was reviewed. For the several targets, such as high superconducting performance, high production rate, long tape etc., the steady progresses could be recognized. The high Jc and Ic values of 3.6 MA/cm2 and 291 A were achieved by using a highly aligned CeO2 cap on an IBAD-GZO layer and optimizing the conditions in the multi-coating process, respectively. For improving the production rate, the calcination time was extremely reduced by the development of the new combination of the starting materials. As the improvement of the production rate, the process for achieving high growth rate was investigated by controlling the atmosphere conditions in the high temperature heat treatment. It was found that both high humid partial pressure and low total pressure conditions were both effective to improve the growth rate and the three times higher growth rate with maintaining high Jc than that in the conventional conditions was confirmed. Additionally, a 0.25 m long tape with uniform Ic values over 200 A and the end-to-end I c value of 210 A was successfully fabricated with traveling in the furnace of the Reel-to-Reel system.

UR - http://www.scopus.com/inward/record.url?scp=4644241341&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=4644241341&partnerID=8YFLogxK

U2 - 10.1016/j.physc.2003.12.095

DO - 10.1016/j.physc.2003.12.095

M3 - Article

AN - SCOPUS:4644241341

VL - 412-414

SP - 885

EP - 889

JO - Physica C: Superconductivity and its Applications

JF - Physica C: Superconductivity and its Applications

SN - 0921-4534

IS - SPEC. ISS.

ER -