Proposal of analysis accuracy improvement method in modified williamson-hall method

    Research output: Contribution to journalArticlepeer-review

    3 Citations (Scopus)

    Abstract

    In the dislocation characterization using radiation diffraction, the modified Williamson-Hall (mWH) method gives the parameter α, φ and q, in which the information about crystallite size, dislocation density and the character of dislocation are contained respectively. The following mWH equation is applied to determine these parameters in the mWH method. (equation presented) In the mWH method, the optimal α-value is selected to give the best linear fitting on the above mWH equation. Putting the optimal α-value into the mWH equation, the other parameters φ and q are automatically determined in the relation between the left side term and the orientation parameter Γ. The original mWH equation is expressed by the following equation, hence the values of ΔK can be calculated on each {hkl} crystal plane applying the obtained values for parameter α, φ and q. (equation presented) As a result, the Williamson-Hall (WH) plots; K vs. ΔK are constructed by the calculation and they are compared with those obtained by experimentally. After that, the values of full width at half maximum are corrected to minimize the error between experimental and calculated WH plots. This process is termed as the modified Williamson-Hall feed-back (mWHFB) method. It was confirmed that the accuracy of dislocation analysis is greatly improved by applying the mWHFB method in comparison with the conventional mWH method.

    Original languageEnglish
    Pages (from-to)661-665
    Number of pages5
    JournalZairyo/Journal of the Society of Materials Science, Japan
    Volume69
    Issue number9
    DOIs
    Publication statusPublished - Sep 2020

    All Science Journal Classification (ASJC) codes

    • Materials Science(all)
    • Condensed Matter Physics
    • Mechanics of Materials
    • Mechanical Engineering

    Fingerprint

    Dive into the research topics of 'Proposal of analysis accuracy improvement method in modified williamson-hall method'. Together they form a unique fingerprint.

    Cite this