Pt-decorated oxide/MPL/GDL-supported PEFCs

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

In order to improve the mass productivity of polymer electrolyte fuel cells (PEFCs), it is useful to have a fully-integrated structure from electrocatalysts to gas diffusion layer. Although carbon support is widely used for PEFCs, carbon corrosion may occur on the cathode side. To solve these technological issues, in this study, non-carbon support is directly prepared on the microporous layer (MPL) coated on the gas diffusion layer (GDL) by arc plasma deposition (APD). Pt catalyst nanoparticles are then deposited by the APD on the non-carbon support to prepare a "Pt/non-carbon support/MPL/GDL" integrated structure. Microstructure of the electrocatalyst layers and electrochemical properties of such MEAs are analyzed.

Original languageEnglish
Title of host publicationECS Transactions
EditorsC. Coutanceau, S. Narayan, Y.-T. Kim, Y. Gochi-Ponce, B.S. Pivovar, T.F. Fuller, R.A. Mantz, P. Shirvanian, D.J. Jones, F. Buechi, V.K. Ramani, J.M. Fenton, K.E. Swider-Lyons, T.J. Schmidt, K.E. Ayers, A.Z. Weber, P.N. Pintauro, P. Strasser, H. Xu, S. Mitsushima, H. Gasteiger, H. Uchida
PublisherElectrochemical Society Inc.
Pages461-468
Number of pages8
Edition13
ISBN (Electronic)9781607685395
DOIs
Publication statusPublished - Jan 1 2018
EventSymposium on Polymer Electrolyte Fuel Cells and Electrolyzers 18, PEFC and E 2018 - AiMES 2018, ECS and SMEQ Joint International Meeting - Cancun, Mexico
Duration: Sep 30 2018Oct 4 2018

Publication series

NameECS Transactions
Number13
Volume86
ISSN (Print)1938-6737
ISSN (Electronic)1938-5862

Other

OtherSymposium on Polymer Electrolyte Fuel Cells and Electrolyzers 18, PEFC and E 2018 - AiMES 2018, ECS and SMEQ Joint International Meeting
CountryMexico
CityCancun
Period9/30/1810/4/18

Fingerprint

Diffusion in gases
Fuel cells
Plasma deposition
Electrocatalysts
Electrolytes
Oxides
Polymers
Carbon
Electrochemical properties
Catalyst supports
Cathodes
Productivity
Corrosion
Nanoparticles
Microstructure
Catalysts

All Science Journal Classification (ASJC) codes

  • Engineering(all)

Cite this

Odoi, H., Nöda, Z., Matsuda, J., Hayashi, A., & Sasaki, K. (2018). Pt-decorated oxide/MPL/GDL-supported PEFCs. In C. Coutanceau, S. Narayan, Y-T. Kim, Y. Gochi-Ponce, B. S. Pivovar, T. F. Fuller, R. A. Mantz, P. Shirvanian, D. J. Jones, F. Buechi, V. K. Ramani, J. M. Fenton, K. E. Swider-Lyons, T. J. Schmidt, K. E. Ayers, A. Z. Weber, P. N. Pintauro, P. Strasser, H. Xu, S. Mitsushima, H. Gasteiger, ... H. Uchida (Eds.), ECS Transactions (13 ed., pp. 461-468). (ECS Transactions; Vol. 86, No. 13). Electrochemical Society Inc.. https://doi.org/10.1149/08613.046ecst

Pt-decorated oxide/MPL/GDL-supported PEFCs. / Odoi, H.; Nöda, Z.; Matsuda, Junko; Hayashi, Akari; Sasaki, Kazunari.

ECS Transactions. ed. / C. Coutanceau; S. Narayan; Y.-T. Kim; Y. Gochi-Ponce; B.S. Pivovar; T.F. Fuller; R.A. Mantz; P. Shirvanian; D.J. Jones; F. Buechi; V.K. Ramani; J.M. Fenton; K.E. Swider-Lyons; T.J. Schmidt; K.E. Ayers; A.Z. Weber; P.N. Pintauro; P. Strasser; H. Xu; S. Mitsushima; H. Gasteiger; H. Uchida. 13. ed. Electrochemical Society Inc., 2018. p. 461-468 (ECS Transactions; Vol. 86, No. 13).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Odoi, H, Nöda, Z, Matsuda, J, Hayashi, A & Sasaki, K 2018, Pt-decorated oxide/MPL/GDL-supported PEFCs. in C Coutanceau, S Narayan, Y-T Kim, Y Gochi-Ponce, BS Pivovar, TF Fuller, RA Mantz, P Shirvanian, DJ Jones, F Buechi, VK Ramani, JM Fenton, KE Swider-Lyons, TJ Schmidt, KE Ayers, AZ Weber, PN Pintauro, P Strasser, H Xu, S Mitsushima, H Gasteiger & H Uchida (eds), ECS Transactions. 13 edn, ECS Transactions, no. 13, vol. 86, Electrochemical Society Inc., pp. 461-468, Symposium on Polymer Electrolyte Fuel Cells and Electrolyzers 18, PEFC and E 2018 - AiMES 2018, ECS and SMEQ Joint International Meeting, Cancun, Mexico, 9/30/18. https://doi.org/10.1149/08613.046ecst
Odoi H, Nöda Z, Matsuda J, Hayashi A, Sasaki K. Pt-decorated oxide/MPL/GDL-supported PEFCs. In Coutanceau C, Narayan S, Kim Y-T, Gochi-Ponce Y, Pivovar BS, Fuller TF, Mantz RA, Shirvanian P, Jones DJ, Buechi F, Ramani VK, Fenton JM, Swider-Lyons KE, Schmidt TJ, Ayers KE, Weber AZ, Pintauro PN, Strasser P, Xu H, Mitsushima S, Gasteiger H, Uchida H, editors, ECS Transactions. 13 ed. Electrochemical Society Inc. 2018. p. 461-468. (ECS Transactions; 13). https://doi.org/10.1149/08613.046ecst
Odoi, H. ; Nöda, Z. ; Matsuda, Junko ; Hayashi, Akari ; Sasaki, Kazunari. / Pt-decorated oxide/MPL/GDL-supported PEFCs. ECS Transactions. editor / C. Coutanceau ; S. Narayan ; Y.-T. Kim ; Y. Gochi-Ponce ; B.S. Pivovar ; T.F. Fuller ; R.A. Mantz ; P. Shirvanian ; D.J. Jones ; F. Buechi ; V.K. Ramani ; J.M. Fenton ; K.E. Swider-Lyons ; T.J. Schmidt ; K.E. Ayers ; A.Z. Weber ; P.N. Pintauro ; P. Strasser ; H. Xu ; S. Mitsushima ; H. Gasteiger ; H. Uchida. 13. ed. Electrochemical Society Inc., 2018. pp. 461-468 (ECS Transactions; 13).
@inproceedings{0ceed3897d1743879379be0593ae8bef,
title = "Pt-decorated oxide/MPL/GDL-supported PEFCs",
abstract = "In order to improve the mass productivity of polymer electrolyte fuel cells (PEFCs), it is useful to have a fully-integrated structure from electrocatalysts to gas diffusion layer. Although carbon support is widely used for PEFCs, carbon corrosion may occur on the cathode side. To solve these technological issues, in this study, non-carbon support is directly prepared on the microporous layer (MPL) coated on the gas diffusion layer (GDL) by arc plasma deposition (APD). Pt catalyst nanoparticles are then deposited by the APD on the non-carbon support to prepare a {"}Pt/non-carbon support/MPL/GDL{"} integrated structure. Microstructure of the electrocatalyst layers and electrochemical properties of such MEAs are analyzed.",
author = "H. Odoi and Z. N{\"o}da and Junko Matsuda and Akari Hayashi and Kazunari Sasaki",
year = "2018",
month = "1",
day = "1",
doi = "10.1149/08613.046ecst",
language = "English",
series = "ECS Transactions",
publisher = "Electrochemical Society Inc.",
number = "13",
pages = "461--468",
editor = "C. Coutanceau and S. Narayan and Y.-T. Kim and Y. Gochi-Ponce and B.S. Pivovar and T.F. Fuller and R.A. Mantz and P. Shirvanian and D.J. Jones and F. Buechi and V.K. Ramani and J.M. Fenton and K.E. Swider-Lyons and T.J. Schmidt and K.E. Ayers and A.Z. Weber and P.N. Pintauro and P. Strasser and H. Xu and S. Mitsushima and H. Gasteiger and H. Uchida",
booktitle = "ECS Transactions",
edition = "13",

}

TY - GEN

T1 - Pt-decorated oxide/MPL/GDL-supported PEFCs

AU - Odoi, H.

AU - Nöda, Z.

AU - Matsuda, Junko

AU - Hayashi, Akari

AU - Sasaki, Kazunari

PY - 2018/1/1

Y1 - 2018/1/1

N2 - In order to improve the mass productivity of polymer electrolyte fuel cells (PEFCs), it is useful to have a fully-integrated structure from electrocatalysts to gas diffusion layer. Although carbon support is widely used for PEFCs, carbon corrosion may occur on the cathode side. To solve these technological issues, in this study, non-carbon support is directly prepared on the microporous layer (MPL) coated on the gas diffusion layer (GDL) by arc plasma deposition (APD). Pt catalyst nanoparticles are then deposited by the APD on the non-carbon support to prepare a "Pt/non-carbon support/MPL/GDL" integrated structure. Microstructure of the electrocatalyst layers and electrochemical properties of such MEAs are analyzed.

AB - In order to improve the mass productivity of polymer electrolyte fuel cells (PEFCs), it is useful to have a fully-integrated structure from electrocatalysts to gas diffusion layer. Although carbon support is widely used for PEFCs, carbon corrosion may occur on the cathode side. To solve these technological issues, in this study, non-carbon support is directly prepared on the microporous layer (MPL) coated on the gas diffusion layer (GDL) by arc plasma deposition (APD). Pt catalyst nanoparticles are then deposited by the APD on the non-carbon support to prepare a "Pt/non-carbon support/MPL/GDL" integrated structure. Microstructure of the electrocatalyst layers and electrochemical properties of such MEAs are analyzed.

UR - http://www.scopus.com/inward/record.url?scp=85058301112&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85058301112&partnerID=8YFLogxK

U2 - 10.1149/08613.046ecst

DO - 10.1149/08613.046ecst

M3 - Conference contribution

AN - SCOPUS:85058301112

T3 - ECS Transactions

SP - 461

EP - 468

BT - ECS Transactions

A2 - Coutanceau, C.

A2 - Narayan, S.

A2 - Kim, Y.-T.

A2 - Gochi-Ponce, Y.

A2 - Pivovar, B.S.

A2 - Fuller, T.F.

A2 - Mantz, R.A.

A2 - Shirvanian, P.

A2 - Jones, D.J.

A2 - Buechi, F.

A2 - Ramani, V.K.

A2 - Fenton, J.M.

A2 - Swider-Lyons, K.E.

A2 - Schmidt, T.J.

A2 - Ayers, K.E.

A2 - Weber, A.Z.

A2 - Pintauro, P.N.

A2 - Strasser, P.

A2 - Xu, H.

A2 - Mitsushima, S.

A2 - Gasteiger, H.

A2 - Uchida, H.

PB - Electrochemical Society Inc.

ER -