Quantitative assessment of microstructure and its effects on compression behavior of aluminum foams via high-resolution synchrotron x-ray tomography

H. Toda, T. Ohgaki, K. Uesugi, M. Kobayashi, N. Kuroda, T. Kobayashi, M. Niinomi, T. Akahori, K. Makii, Y. Aruga

Research output: Contribution to journalArticle

79 Citations (Scopus)

Abstract

Synchrotron X-ray microtornography has been used for the three-dimensional characterization of microstructure in the cell walls of aluminum foams. A combination of high-resolution phase contrast imaging technique and several application techniques has enabled the quantitative image analyses of microstructures as well as the assessment of their effects on deformation behaviors. The application techniques include local area tomography, microstructural gauging and in-situ observation using a specially designed material test rig. It has been clarified that ductile buckling of a cell wall occurs regardless of any of the microstructural factors in the case of a pure aluminum foam, while rather brittle fracture of a cell wall is induced by the existence of coarse micropores and their distribution independently of the intermetallic particles and the grain boundary in the case of aluminum foams alloyed with Zn and Mg. It has also been confirmed that coarse TiH2 particles, which are a residual foaming agent added to alloy melts, remain intact during the deformation. When cooling rate during foaming is high, however, lower energy absorption might be attributable to the significant amount of residual TiH2 particle and its inhomogeneous distribution. These tendencies are also confirmed by three-dimensional strain mapping by tracking internal microstructural features.

Original languageEnglish
Pages (from-to)1211-1219
Number of pages9
JournalMetallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
Volume37
Issue number4
DOIs
Publication statusPublished - Apr 1 2006
Externally publishedYes

Fingerprint

Aluminum
Synchrotrons
foams
Tomography
Foams
foaming
synchrotrons
Compaction
tomography
Cells
aluminum
X rays
microstructure
Microstructure
high resolution
materials tests
Blowing agents
x rays
Gaging
phase contrast

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Mechanics of Materials
  • Metals and Alloys

Cite this

Quantitative assessment of microstructure and its effects on compression behavior of aluminum foams via high-resolution synchrotron x-ray tomography. / Toda, H.; Ohgaki, T.; Uesugi, K.; Kobayashi, M.; Kuroda, N.; Kobayashi, T.; Niinomi, M.; Akahori, T.; Makii, K.; Aruga, Y.

In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 37, No. 4, 01.04.2006, p. 1211-1219.

Research output: Contribution to journalArticle

Toda, H. ; Ohgaki, T. ; Uesugi, K. ; Kobayashi, M. ; Kuroda, N. ; Kobayashi, T. ; Niinomi, M. ; Akahori, T. ; Makii, K. ; Aruga, Y. / Quantitative assessment of microstructure and its effects on compression behavior of aluminum foams via high-resolution synchrotron x-ray tomography. In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 2006 ; Vol. 37, No. 4. pp. 1211-1219.
@article{de834f0cd72544ef8c9bc70e1eb30039,
title = "Quantitative assessment of microstructure and its effects on compression behavior of aluminum foams via high-resolution synchrotron x-ray tomography",
abstract = "Synchrotron X-ray microtornography has been used for the three-dimensional characterization of microstructure in the cell walls of aluminum foams. A combination of high-resolution phase contrast imaging technique and several application techniques has enabled the quantitative image analyses of microstructures as well as the assessment of their effects on deformation behaviors. The application techniques include local area tomography, microstructural gauging and in-situ observation using a specially designed material test rig. It has been clarified that ductile buckling of a cell wall occurs regardless of any of the microstructural factors in the case of a pure aluminum foam, while rather brittle fracture of a cell wall is induced by the existence of coarse micropores and their distribution independently of the intermetallic particles and the grain boundary in the case of aluminum foams alloyed with Zn and Mg. It has also been confirmed that coarse TiH2 particles, which are a residual foaming agent added to alloy melts, remain intact during the deformation. When cooling rate during foaming is high, however, lower energy absorption might be attributable to the significant amount of residual TiH2 particle and its inhomogeneous distribution. These tendencies are also confirmed by three-dimensional strain mapping by tracking internal microstructural features.",
author = "H. Toda and T. Ohgaki and K. Uesugi and M. Kobayashi and N. Kuroda and T. Kobayashi and M. Niinomi and T. Akahori and K. Makii and Y. Aruga",
year = "2006",
month = "4",
day = "1",
doi = "10.1007/s11661-006-1072-0",
language = "English",
volume = "37",
pages = "1211--1219",
journal = "Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science",
issn = "1073-5623",
publisher = "Springer Boston",
number = "4",

}

TY - JOUR

T1 - Quantitative assessment of microstructure and its effects on compression behavior of aluminum foams via high-resolution synchrotron x-ray tomography

AU - Toda, H.

AU - Ohgaki, T.

AU - Uesugi, K.

AU - Kobayashi, M.

AU - Kuroda, N.

AU - Kobayashi, T.

AU - Niinomi, M.

AU - Akahori, T.

AU - Makii, K.

AU - Aruga, Y.

PY - 2006/4/1

Y1 - 2006/4/1

N2 - Synchrotron X-ray microtornography has been used for the three-dimensional characterization of microstructure in the cell walls of aluminum foams. A combination of high-resolution phase contrast imaging technique and several application techniques has enabled the quantitative image analyses of microstructures as well as the assessment of their effects on deformation behaviors. The application techniques include local area tomography, microstructural gauging and in-situ observation using a specially designed material test rig. It has been clarified that ductile buckling of a cell wall occurs regardless of any of the microstructural factors in the case of a pure aluminum foam, while rather brittle fracture of a cell wall is induced by the existence of coarse micropores and their distribution independently of the intermetallic particles and the grain boundary in the case of aluminum foams alloyed with Zn and Mg. It has also been confirmed that coarse TiH2 particles, which are a residual foaming agent added to alloy melts, remain intact during the deformation. When cooling rate during foaming is high, however, lower energy absorption might be attributable to the significant amount of residual TiH2 particle and its inhomogeneous distribution. These tendencies are also confirmed by three-dimensional strain mapping by tracking internal microstructural features.

AB - Synchrotron X-ray microtornography has been used for the three-dimensional characterization of microstructure in the cell walls of aluminum foams. A combination of high-resolution phase contrast imaging technique and several application techniques has enabled the quantitative image analyses of microstructures as well as the assessment of their effects on deformation behaviors. The application techniques include local area tomography, microstructural gauging and in-situ observation using a specially designed material test rig. It has been clarified that ductile buckling of a cell wall occurs regardless of any of the microstructural factors in the case of a pure aluminum foam, while rather brittle fracture of a cell wall is induced by the existence of coarse micropores and their distribution independently of the intermetallic particles and the grain boundary in the case of aluminum foams alloyed with Zn and Mg. It has also been confirmed that coarse TiH2 particles, which are a residual foaming agent added to alloy melts, remain intact during the deformation. When cooling rate during foaming is high, however, lower energy absorption might be attributable to the significant amount of residual TiH2 particle and its inhomogeneous distribution. These tendencies are also confirmed by three-dimensional strain mapping by tracking internal microstructural features.

UR - http://www.scopus.com/inward/record.url?scp=33646250196&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33646250196&partnerID=8YFLogxK

U2 - 10.1007/s11661-006-1072-0

DO - 10.1007/s11661-006-1072-0

M3 - Article

AN - SCOPUS:33646250196

VL - 37

SP - 1211

EP - 1219

JO - Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

JF - Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

SN - 1073-5623

IS - 4

ER -