常温・大気圧下における有機マイクロディスクの高速印刷作製

Cong Chen; Tomoya Ota; Soichiro Ryu; Hiroaki Yoshioka; Kei Yasui; Daisuke Maeda; Yuji Oki

doi:10.11527/jceeek.2014.0_516

常温・大気圧下における有機マイクロディスクの高速印刷作製

Translated title of the contribution: Rapid microdisk printing in room temperature atmosphere

Cong Chen, Tomoya Ota, Soichiro Ryu, Hiroaki Yoshioka, Kei Yasui, Daisuke Maeda, Yuji Oki

Department of I&E Visionaries

Research output: Contribution to journal › Article

Abstract

Organic and polymeric microdisks were fabricated with ink-jet technique and whispering gallery mode (WGM) cavity was demonstrated. The scheme provides low cost and low energy fabrication in room temperature atmosphere. Single shot fabrication of extremely low viscous hyperbranched polymer successfully mounted 1.8 µm-thick-microdisks on polymer pedestals. The disk diameter was controlled to about 100 µm by concentration control. The pedestals were fabricated by multiple shots and partial envelope etching. WGM laser operation was also confirmed by doping laser dyes.

Translated title of the contribution	Rapid microdisk printing in room temperature atmosphere
Original language	Undefined/Unknown
Pages (from-to)	516-517
Number of pages	2
Journal	電気関係学会九州支部連合大会講演論文集
Volume	2014
Issue number	0
DOIs	https://doi.org/10.11527/jceeek.2014.0_516
Publication status	Published - 2014

Access to Document

10.11527/jceeek.2014.0_516

https://doi.org/10.11527/jceeek.2014.0_516

Cite this

@article{0105573ab10142f2a383f81e420ccced,

title = "常温・大気圧下における有機マイクロディスクの高速印刷作製",

abstract = "Organic and polymeric microdisks were fabricated with ink-jet technique and whispering gallery mode (WGM) cavity was demonstrated. The scheme provides low cost and low energy fabrication in room temperature atmosphere. Single shot fabrication of extremely low viscous hyperbranched polymer successfully mounted 1.8 µm-thick-microdisks on polymer pedestals. The disk diameter was controlled to about 100 µm by concentration control. The pedestals were fabricated by multiple shots and partial envelope etching. WGM laser operation was also confirmed by doping laser dyes.",

author = "Cong Chen and Tomoya Ota and Soichiro Ryu and Hiroaki Yoshioka and Kei Yasui and Daisuke Maeda and Yuji Oki",

year = "2014",

doi = "10.11527/jceeek.2014.0_516",

language = "未定義/不明",

volume = "2014",

pages = "516--517",

journal = "電気関係学会九州支部連合大会講演論文集",

publisher = "電気・情報関係学会九州支部連合大会委員会",

number = "0",

}

TY - JOUR

T1 - 常温・大気圧下における有機マイクロディスクの高速印刷作製

AU - Chen, Cong

AU - Ota, Tomoya

AU - Ryu, Soichiro

AU - Yoshioka, Hiroaki

AU - Yasui, Kei

AU - Maeda, Daisuke

AU - Oki, Yuji

PY - 2014

Y1 - 2014

N2 - Organic and polymeric microdisks were fabricated with ink-jet technique and whispering gallery mode (WGM) cavity was demonstrated. The scheme provides low cost and low energy fabrication in room temperature atmosphere. Single shot fabrication of extremely low viscous hyperbranched polymer successfully mounted 1.8 µm-thick-microdisks on polymer pedestals. The disk diameter was controlled to about 100 µm by concentration control. The pedestals were fabricated by multiple shots and partial envelope etching. WGM laser operation was also confirmed by doping laser dyes.

AB - Organic and polymeric microdisks were fabricated with ink-jet technique and whispering gallery mode (WGM) cavity was demonstrated. The scheme provides low cost and low energy fabrication in room temperature atmosphere. Single shot fabrication of extremely low viscous hyperbranched polymer successfully mounted 1.8 µm-thick-microdisks on polymer pedestals. The disk diameter was controlled to about 100 µm by concentration control. The pedestals were fabricated by multiple shots and partial envelope etching. WGM laser operation was also confirmed by doping laser dyes.

U2 - 10.11527/jceeek.2014.0_516

DO - 10.11527/jceeek.2014.0_516

M3 - 学術誌

VL - 2014

SP - 516

EP - 517

JO - 電気関係学会九州支部連合大会講演論文集

JF - 電気関係学会九州支部連合大会講演論文集

IS - 0

ER -

常温・大気圧下における有機マイクロディスクの高速印刷作製

Abstract

Access to Document

Fingerprint

Cite this