Real time analysis for forecasting of chock shields performance a case study

S. Tadisetty, R. N. Gupta, K. Matsui, Hideki Shimada

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Difficult caving characteristics of overlying strata have been experienced in most of the Indian longwall faces. Caving of the roof is very important aspect for successful longwall operations. The increase in uncaved roof span will cause dynamic loading on the chock shields and face due to sudden increase of leg closure and pressure. In most of the cases conventional yield valves do not respond to dynamic loading, because of the design constraints. Further, goaf overhang will increase the front abutment stresses and initiate the severe face spalling. The severe face spalling will deteriorates the safety and productivity of the longwall faces. In addition, the efficiency of the chock shields is reducing for every panel extraction due to complex geomechanical conditions. The efficiency deterioration is leading to hydraulic leakages. The increased hydraulic leakages, which are continuously overloading the power pack pump resulting in frequent failure. The deteriorated condition of hydraulic systems, chock shields are not offering adequate resistance. Thus the strata control problems are enhanced. This complex situation was disturbed face operations very often. Therefore, the continuous monitoring and analysis of chock shields performance is imperative for forecasting in real time for improving productivity and safety of longwall operations. This paper discuss the analysis and forecasting of the chock shields behavior in real time. The authors successfully developed the Real Time system with state-of-the-art- technology. This innovative system was successfully implemented in one of the Indian problematic longwall mines for continuous monitoring, analysis and forecasting of chock shields behavior. Therefore, the Real Time system has improved safety and productivity of longwall operations. However, this paper will mainly concentrate discussions on analysis and forecasting of chock shields behavior.

Original languageEnglish
Title of host publicationApplication of Computers and Operations Research in the Mineral Industry - Proc. of the 32nd Int. Symposium on the Application of Computers and Operations Research in the Mineral Industry, APCOM 2005
Pages419-424
Number of pages6
Publication statusPublished - Dec 1 2005
Event32nd International Symposium on the Application of Computers and Operations Research in the Mineral Industry, APCOM 2005 - Tucson, AZ, United States
Duration: Mar 30 2005Apr 1 2005

Other

Other32nd International Symposium on the Application of Computers and Operations Research in the Mineral Industry, APCOM 2005
CountryUnited States
CityTucson, AZ
Period3/30/054/1/05

Fingerprint

shield
Spalling
Productivity
Leakage (fluid)
Hydraulics
Real time systems
Roofs
spalling
caving
safety
Monitoring
hydraulics
productivity
leakage
roof
Deterioration
Pumps
monitoring
analysis
pump

All Science Journal Classification (ASJC) codes

  • Computer Science Applications
  • Geochemistry and Petrology

Cite this

Tadisetty, S., Gupta, R. N., Matsui, K., & Shimada, H. (2005). Real time analysis for forecasting of chock shields performance a case study. In Application of Computers and Operations Research in the Mineral Industry - Proc. of the 32nd Int. Symposium on the Application of Computers and Operations Research in the Mineral Industry, APCOM 2005 (pp. 419-424)

Real time analysis for forecasting of chock shields performance a case study. / Tadisetty, S.; Gupta, R. N.; Matsui, K.; Shimada, Hideki.

Application of Computers and Operations Research in the Mineral Industry - Proc. of the 32nd Int. Symposium on the Application of Computers and Operations Research in the Mineral Industry, APCOM 2005. 2005. p. 419-424.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tadisetty, S, Gupta, RN, Matsui, K & Shimada, H 2005, Real time analysis for forecasting of chock shields performance a case study. in Application of Computers and Operations Research in the Mineral Industry - Proc. of the 32nd Int. Symposium on the Application of Computers and Operations Research in the Mineral Industry, APCOM 2005. pp. 419-424, 32nd International Symposium on the Application of Computers and Operations Research in the Mineral Industry, APCOM 2005, Tucson, AZ, United States, 3/30/05.
Tadisetty S, Gupta RN, Matsui K, Shimada H. Real time analysis for forecasting of chock shields performance a case study. In Application of Computers and Operations Research in the Mineral Industry - Proc. of the 32nd Int. Symposium on the Application of Computers and Operations Research in the Mineral Industry, APCOM 2005. 2005. p. 419-424
Tadisetty, S. ; Gupta, R. N. ; Matsui, K. ; Shimada, Hideki. / Real time analysis for forecasting of chock shields performance a case study. Application of Computers and Operations Research in the Mineral Industry - Proc. of the 32nd Int. Symposium on the Application of Computers and Operations Research in the Mineral Industry, APCOM 2005. 2005. pp. 419-424
@inproceedings{88f70a6ce8884bc8b7a67b1f15d0bcf8,
title = "Real time analysis for forecasting of chock shields performance a case study",
abstract = "Difficult caving characteristics of overlying strata have been experienced in most of the Indian longwall faces. Caving of the roof is very important aspect for successful longwall operations. The increase in uncaved roof span will cause dynamic loading on the chock shields and face due to sudden increase of leg closure and pressure. In most of the cases conventional yield valves do not respond to dynamic loading, because of the design constraints. Further, goaf overhang will increase the front abutment stresses and initiate the severe face spalling. The severe face spalling will deteriorates the safety and productivity of the longwall faces. In addition, the efficiency of the chock shields is reducing for every panel extraction due to complex geomechanical conditions. The efficiency deterioration is leading to hydraulic leakages. The increased hydraulic leakages, which are continuously overloading the power pack pump resulting in frequent failure. The deteriorated condition of hydraulic systems, chock shields are not offering adequate resistance. Thus the strata control problems are enhanced. This complex situation was disturbed face operations very often. Therefore, the continuous monitoring and analysis of chock shields performance is imperative for forecasting in real time for improving productivity and safety of longwall operations. This paper discuss the analysis and forecasting of the chock shields behavior in real time. The authors successfully developed the Real Time system with state-of-the-art- technology. This innovative system was successfully implemented in one of the Indian problematic longwall mines for continuous monitoring, analysis and forecasting of chock shields behavior. Therefore, the Real Time system has improved safety and productivity of longwall operations. However, this paper will mainly concentrate discussions on analysis and forecasting of chock shields behavior.",
author = "S. Tadisetty and Gupta, {R. N.} and K. Matsui and Hideki Shimada",
year = "2005",
month = "12",
day = "1",
language = "English",
isbn = "0415374499",
pages = "419--424",
booktitle = "Application of Computers and Operations Research in the Mineral Industry - Proc. of the 32nd Int. Symposium on the Application of Computers and Operations Research in the Mineral Industry, APCOM 2005",

}

TY - GEN

T1 - Real time analysis for forecasting of chock shields performance a case study

AU - Tadisetty, S.

AU - Gupta, R. N.

AU - Matsui, K.

AU - Shimada, Hideki

PY - 2005/12/1

Y1 - 2005/12/1

N2 - Difficult caving characteristics of overlying strata have been experienced in most of the Indian longwall faces. Caving of the roof is very important aspect for successful longwall operations. The increase in uncaved roof span will cause dynamic loading on the chock shields and face due to sudden increase of leg closure and pressure. In most of the cases conventional yield valves do not respond to dynamic loading, because of the design constraints. Further, goaf overhang will increase the front abutment stresses and initiate the severe face spalling. The severe face spalling will deteriorates the safety and productivity of the longwall faces. In addition, the efficiency of the chock shields is reducing for every panel extraction due to complex geomechanical conditions. The efficiency deterioration is leading to hydraulic leakages. The increased hydraulic leakages, which are continuously overloading the power pack pump resulting in frequent failure. The deteriorated condition of hydraulic systems, chock shields are not offering adequate resistance. Thus the strata control problems are enhanced. This complex situation was disturbed face operations very often. Therefore, the continuous monitoring and analysis of chock shields performance is imperative for forecasting in real time for improving productivity and safety of longwall operations. This paper discuss the analysis and forecasting of the chock shields behavior in real time. The authors successfully developed the Real Time system with state-of-the-art- technology. This innovative system was successfully implemented in one of the Indian problematic longwall mines for continuous monitoring, analysis and forecasting of chock shields behavior. Therefore, the Real Time system has improved safety and productivity of longwall operations. However, this paper will mainly concentrate discussions on analysis and forecasting of chock shields behavior.

AB - Difficult caving characteristics of overlying strata have been experienced in most of the Indian longwall faces. Caving of the roof is very important aspect for successful longwall operations. The increase in uncaved roof span will cause dynamic loading on the chock shields and face due to sudden increase of leg closure and pressure. In most of the cases conventional yield valves do not respond to dynamic loading, because of the design constraints. Further, goaf overhang will increase the front abutment stresses and initiate the severe face spalling. The severe face spalling will deteriorates the safety and productivity of the longwall faces. In addition, the efficiency of the chock shields is reducing for every panel extraction due to complex geomechanical conditions. The efficiency deterioration is leading to hydraulic leakages. The increased hydraulic leakages, which are continuously overloading the power pack pump resulting in frequent failure. The deteriorated condition of hydraulic systems, chock shields are not offering adequate resistance. Thus the strata control problems are enhanced. This complex situation was disturbed face operations very often. Therefore, the continuous monitoring and analysis of chock shields performance is imperative for forecasting in real time for improving productivity and safety of longwall operations. This paper discuss the analysis and forecasting of the chock shields behavior in real time. The authors successfully developed the Real Time system with state-of-the-art- technology. This innovative system was successfully implemented in one of the Indian problematic longwall mines for continuous monitoring, analysis and forecasting of chock shields behavior. Therefore, the Real Time system has improved safety and productivity of longwall operations. However, this paper will mainly concentrate discussions on analysis and forecasting of chock shields behavior.

UR - http://www.scopus.com/inward/record.url?scp=84856940061&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84856940061&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:84856940061

SN - 0415374499

SN - 9780415374491

SP - 419

EP - 424

BT - Application of Computers and Operations Research in the Mineral Industry - Proc. of the 32nd Int. Symposium on the Application of Computers and Operations Research in the Mineral Industry, APCOM 2005

ER -