水動力を使った製材システムの復元的考察− 福 岡 県 う き は 市 の 平 川 製 材 所 を 対 象として−

Shinta Akada; Shigetomo Kikuchi; Yuta Noguchi

doi:10.3130/aijt.25.1323

水動力を使った製材システムの復元的考察− 福岡県うきは市の平川製材所を対象として−

Translated title of the contribution: Reconstruction of water lumbering system − Case study of Hirakawa lumbering factory in Ukiha, Fukuoka −

Shinta Akada, Shigetomo Kikuchi, Yuta Noguchi

Environmental Engineering, Planning and Design Section

Research output: Contribution to journal › Article › peer-review

Abstract

The purpose of this paper is to reconstruct manufacturing system of Hirakawa Lumbering Factory. It was used in favorable conditions of water power supplying such as “Ide” canal in 1939. There were two floor in the factory, upper floor for lumbering, and down floor for power supplying. The flow line of wooden materials was reconstructed from the remains of lumbering machines. And the power transportation system was revealed from the analysis of machines in down floor. The design of lumbering system was rational, despite the power supply system was complicated. Therefore priority was given to lumbering system in this case.

Translated title of the contribution	Reconstruction of water lumbering system − Case study of Hirakawa lumbering factory in Ukiha, Fukuoka −
Original language	Japanese
Pages (from-to)	1323-1326
Number of pages	4
Journal	AIJ Journal of Technology and Design
Volume	25
Issue number	61
DOIs	https://doi.org/10.3130/aijt.25.1323
Publication status	Published - Jan 1 2019

All Science Journal Classification (ASJC) codes

Architecture
Building and Construction

Access to Document

10.3130/aijt.25.1323

Fingerprint Dive into the research topics of 'Reconstruction of water lumbering system − Case study of Hirakawa lumbering factory in Ukiha, Fukuoka −'. Together they form a unique fingerprint.

Cite this

@article{d6ad5880198b4ae9a763dabf75507acd,

title = "水動力を使った製材システムの復元的考察− 福岡県うきは市の平川製材所を対象として−",

abstract = "The purpose of this paper is to reconstruct manufacturing system of Hirakawa Lumbering Factory. It was used in favorable conditions of water power supplying such as “Ide” canal in 1939. There were two floor in the factory, upper floor for lumbering, and down floor for power supplying. The flow line of wooden materials was reconstructed from the remains of lumbering machines. And the power transportation system was revealed from the analysis of machines in down floor. The design of lumbering system was rational, despite the power supply system was complicated. Therefore priority was given to lumbering system in this case.",

author = "Shinta Akada and Shigetomo Kikuchi and Yuta Noguchi",

year = "2019",

month = jan,

day = "1",

doi = "10.3130/aijt.25.1323",

language = "Japanese",

volume = "25",

pages = "1323--1326",

journal = "AIJ Journal of Technology and Design",

issn = "1341-9463",

publisher = "日本建築学会",

number = "61",

}

TY - JOUR

T1 - 水動力を使った製材システムの復元的考察− 福岡県うきは市の平川製材所を対象として−

AU - Akada, Shinta

AU - Kikuchi, Shigetomo

AU - Noguchi, Yuta

PY - 2019/1/1

Y1 - 2019/1/1

N2 - The purpose of this paper is to reconstruct manufacturing system of Hirakawa Lumbering Factory. It was used in favorable conditions of water power supplying such as “Ide” canal in 1939. There were two floor in the factory, upper floor for lumbering, and down floor for power supplying. The flow line of wooden materials was reconstructed from the remains of lumbering machines. And the power transportation system was revealed from the analysis of machines in down floor. The design of lumbering system was rational, despite the power supply system was complicated. Therefore priority was given to lumbering system in this case.

AB - The purpose of this paper is to reconstruct manufacturing system of Hirakawa Lumbering Factory. It was used in favorable conditions of water power supplying such as “Ide” canal in 1939. There were two floor in the factory, upper floor for lumbering, and down floor for power supplying. The flow line of wooden materials was reconstructed from the remains of lumbering machines. And the power transportation system was revealed from the analysis of machines in down floor. The design of lumbering system was rational, despite the power supply system was complicated. Therefore priority was given to lumbering system in this case.

UR - http://www.scopus.com/inward/record.url?scp=85076958945&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85076958945&partnerID=8YFLogxK

U2 - 10.3130/aijt.25.1323

DO - 10.3130/aijt.25.1323

M3 - Article

AN - SCOPUS:85076958945

VL - 25

SP - 1323

EP - 1326

JO - AIJ Journal of Technology and Design

JF - AIJ Journal of Technology and Design

SN - 1341-9463