Reduction of contact resistance on AlGaN/GaN HEMT structures introducing uneven AlGaN layers

Yusuke Takei, Masayuki Kamiya, Kazuo Tsutsui, Wataru Saito, Kuniyuki Kakushima, Hitoshi Wakabayashi, Yoshinori Kataoka, Hiroshi Iwai

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

A new technique to reduce contact resistance on AlGaN/GaN HEMTs was proposed. This method introduced uneven AlGaN layer structures. 2D device simulations revealed a clear increase in two-dimensional electron gas (2DEG) concentration near the edge regions where the AlGaN layer thickness fluctuated. This fringing effect is useful because metal and high-density 2DEG can approach each other, overcoming an inherent tradeoff involving the AlGaN layer thickness. Experiments demonstrated the effectiveness of this technique, in which contact resistances obtained on some structures with uneven AlGaN layers were lower than the lowest limit for conventional flat AlGaN structures.

Original languageEnglish
Pages (from-to)1104-1109
Number of pages6
JournalPhysica Status Solidi (A) Applications and Materials Science
Volume212
Issue number5
DOIs
Publication statusPublished - May 1 2015
Externally publishedYes

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films
  • Electrical and Electronic Engineering
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Reduction of contact resistance on AlGaN/GaN HEMT structures introducing uneven AlGaN layers'. Together they form a unique fingerprint.

  • Cite this