Rubberized concrete durability against abrasion

Nurazuwa Md Noor, Daisuke Yamamoto, Hidenori Hamada, Yasutaka Sagawa

Research output: Contribution to journalConference articlepeer-review

1 Citation (Scopus)

Abstract

Durability performance of rubberized concrete against abrasion is presented in this paper. Surface depth loss was measured when abrasion load was constantly applied on concrete surface at each 500 interval rotation. Specimen with water-to cement ratio of 0.50 and 0.35 was prepared and tested at 28 days of curing age. In addition, 10% silica fume, SF was added to provide denser concrete and to understand its effectiveness against wear when added with crumb rubber. Results showed that crumb rubber shows good potential in providing abrasion resistance to concrete mix. However, in the case of rubberized concrete with silica fume, abrasion resistance was found to be slightly decreased with compressive strength more than 50N/mm2 due to the lack of low elastic modulus of CR particles to accommodate with denser cement matrix.

Original languageEnglish
Article number01006
JournalMATEC Web of Conferences
Volume47
DOIs
Publication statusPublished - Apr 1 2016
Event3rd International Conference on Civil and Environmental Engineering for Sustainability, IConCEES 2015 - Melaka, Malaysia
Duration: Dec 1 2015Dec 2 2015

All Science Journal Classification (ASJC) codes

  • Chemistry(all)
  • Materials Science(all)
  • Engineering(all)

Fingerprint Dive into the research topics of 'Rubberized concrete durability against abrasion'. Together they form a unique fingerprint.

Cite this